Made of stainless steel, these pocket-size flashlights have a smooth, easy-to-clean surface. They have long-lasting, built-in LEDs that are more efficient and generate less heat than other light technologies. They cast a flood beam, which is especially good for close-up tasks and inspection work. All are tested and rated to ANSI/NEMA FL 1 standards. Rated IP54, they protect against dust and liquid splashed from all angles. These penlights cannot be sold to the listed areas due to energy efficiency regulations.

Light up objects more than a quarter of a mile away. These flashlights are also known as searchlights. They’re tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Flashlights with a momentary light setting are good when you only need light in short bursts, such as during inspection work. They’ll produce light when you hold down the button.

Flashlights with a spot-to-flood beam let you adjust from a narrow spot beam to a wide flood beam by twisting the head. Flashlights with a spot beam cast a beam with a bright center to light up long distances. Flashlights with a flood beam cast a uniform spread of light to illuminate large areas.

The smooth stainless steel surface allows for easy cleaning. These flashlights have long-lasting, built-in LEDs that are more efficient and generate less heat than other light technologies. They cast a spot beam, where the center is brighter than the edges for long-distance illumination. Rated IP04, they withstand liquid splashed from all angles. All stainless steel flashlights were tested and rated to ANSI/NEMA FL 1 standards.

Flashlights with an adjustable beam change from a wide floodlight to a narrow spotlight with a slide focus for one-hand operation. They can operate on either the included rechargeable battery or on four standard AAA alkaline batteries. This flashlight cannot be sold to Canada due to local energy efficiency requirements.

Note: Battery life is significantly reduced when flashlights are used at the high-beam light setting.

Plug in these flashlights and they’ll automatically light up when the power goes out. There’s no need to regularly replace the batteries—they recharge on the base when it’s plugged into an outlet. They have long-lasting, built-in LEDs that are more efficient and generate less heat than other light technologies. Good for close-up tasks and inspection work, these flashlights cast a flood beam to evenly distribute light. They have two modes: a flashlight on the top and a torchlight on the side.

When the power goes out, these flashlights automatically light up. Keep them plugged in, and they'll switch on when there's an outage. The head tilts so you can aim light wherever you need it. Unplug them to carry them around and use them like a standard flashlight. They have a flat bottom, so you can work hands-free without them rolling away. And if you need a task light, stand them on their end and tilt the light at a right angle. Ideal for lighting up long distances, they cast a spot beam with a bright center. The status indicator lets you know when they need a recharge. Rated IP04, these flashlights withstand liquid splashed from all angles.

Clip these little flashlights to a baseball cap or a surface to light up your work. They cast a flood beam with a uniform spread of light that’s ideal for close-up tasks.

Styles A-D can clip onto the brim of a hat. These flashlights are also tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Style A come with an elastic band, so you can wear them as a headlamp.

Style C have a gooseneck arm to direct light where you need it. This makes them a good fit for pockets and clipboards.

On flashlights with color options, the green beam shows more contrast than the red beam, but it can interfere with your ability to see in dark conditions. The red beam lets you see in low light without disrupting your night vision.

IP04- and IP54-rated flashlights are sealed to keep out dripping, splashing, and falling liquids, as well as humidity.

Tilt the head on these flashlights to aim light exactly where it's needed. They have a flat bottom, so you can work hands-free without them rolling away. You can also stand them on their end to use them as a task light. These flashlights cast a spot beam with a bright center that reaches long distances. To let you know when to recharge, they have a status indicator. These flashlights meet ANSI/PLATO FL 1, so they’ve been tested for light output, impact resistance, and battery life. Each flashlight comes with a shoulder strap for easy transport.

Flashlights with a 120° head tilt have a ribbed grip that won’t slip out of your hand.

Flashlights with a 340° head tilt have a handle that pivots open, so you can hang them from a ladder or pipe to light up work from above. If you hang them, they’re durable enough to keep working if they fall from 6 feet.

IP04-rated flashlights are sealed to keep out dripping, splashing, and falling liquids, as well as humidity. IP67-rated flashlights can be temporarily submerged, so they’ll keep working if you drop them in water. They’re also sealed against dust.

Always have a flashlight on hand—these attach to a key ring. All have a nonslip grip to ensure a secure hold. All keychain flashlights were tested and rated to ANSI/NEMA FL 1 standards.

LED lights produce more light, are more efficient, and generate less heat than incandescent lights. They cast a flood beam, which is especially good for close-up tasks and inspection work.

Note: Battery life is significantly reduced when flashlights are used at the high-beam light setting.

All of these flashlights stand up to wet environments. They have a slip-resistant grip to ensure a secure hold.

IP04 flashlights withstand liquid splashed from all angles.

IP07 flashlights withstand temporary submersion in a maximum of one meter of water for up to 30 minutes.

LED flashlights last longer, are more efficient, and generate less heat than krypton flashlights.

Flood beam flashlights are especially good for close-up tasks and inspection work.

Styles A-E were tested and rated to ANSI/NEMA FL 1 standards.

CE marked flashlights meet European health, safety, and environmental protection requirements.

Style C switch between red and white light beams with a twist of their head; the red beam is particularly effective when it’s dark out. They also work with non-rechargeable batteries (not included).

Style D have a detachable power bank with a USB connection for charging small devices, such as phones. When they’re separated, cover the exposed ends of the bank and flashlight with the included caps. These flashlights are dimmable, and they revert to their most recent brightness setting when you turn them on.

Rated IP07, you can drop these penlights in water and they’ll still work. Plus, they’re small enough to fit in your pocket. They cast a spot beam with a bright center for long-distance illumination. These penlights are tested against ANSI/Plato FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Style A have a lockout setting so they don’t get turned on by accident.

Style B have a knurled grip that won’t slip out of your hand. If you need these penlights to work right away and can’t wait for a charge, they’ll run on two AAA disposable batteries, too.

Because these flashlights are buoyant, they're easy to recover when dropped in the water. All have a long-lasting, built-in LED that is more efficient and generates less heat than other light technologies. These flashlights cast a spot beam that has a bright center for long-distance illumination. They are rated IP04 to withstand liquid from all directions. These flashlights meet ANSI/Plato FL 1, so they've been tested for impact resistance, run time, and beam distance.

Safely light up work in explosion-prone areas. Rated NEC Class I, these flashlights are safe to use in areas with ignitable concentrations of flammable or combustible gases, vapors, and liquids.

IP67, IP07 and IP08 rated flashlights will still work after being temporarily submerged in water. IP67 rated lights are also sealed against dust.

Styles A-H are intrinsically safe. They cannot cause an explosion, so they're a better choice where hazardous material is present in normal operating conditions.

Style A have a second LED on the body that aims a flood beam downward to light up your footsteps. This LED can double as a task light—just stand these flashlights on their end or hang them up. They’ll also stick to metal surfaces with a magnet on the bottom and on the clip.

Style B are our most impact-resistant option. They’ll withstand drops from up to 9 feet.

Style C have LEDs behind the lens that cast a flood beam downward to light up your footsteps, even while the spot beam is on. The head glows in the dark, so they’re easy to find. Style C with rechargeable batteries can operate on either the included rechargeable batteries or standard AA disposable batteries.

Tilt the head on these flashlights to point light where you need it in explosion-prone areas. Rated NEC Classes I and II, they’re safe to use where there are ignitable concentrations of flammable or combustible gases, vapors, liquids, and dust. Rated IP67, they seal out humidity and dripping, splashing, and falling liquids. They’re also dust-tight and will still work if temporarily submerged in water. These floodlights are tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, battery life, and impact resistance. For instance, they’ve been confirmed to still work if dropped from 6 feet.

Style A and B light up your footsteps with a second LED beneath the head that aims a flood beam downward. This LED can double as a task light—just tilt the head up to 90° and stand these flashlights on their end.

Style C are our brightest and most versatile option. For use as a task light, set them on their flat bottom or back. You can also hang them up on their hooks. Carry them around hands-free with the included strap. Those with a magnetic mount can be mounted to a wall or beam. The head still pivots 180° to adjust the direction of the light when they’re mounted with the magnet.

Flashlights with a spot beam have a bright center for long-distance illumination. Flashlights with a flood beam cast a uniform spread of light that’s good for close-up tasks and inspection work.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

Keep your hands free by wearing a flashlight on your head. These headlamps have long-lasting, built-in LEDs that produce more light and generate less heat than other light technologies. An included strap secures the lamp to your head and adjusts for a comfortable fit.

Headlamps with a uniform beam are especially good for close-up tasks and inspection work. Headlamps with a bull's eye beam have a bright center that can reach long distances.

IP54 rated headlamps protect against dust and liquid splashed from all angles.

Headlamps that cannot be sold to Canada are restricted by local energy efficiency requirements.

Note: Battery life is significantly reduced when headlamps are used at the high-beam light setting.

Drop these headlamps in water and they’ll still work—they’re IP rated to withstand submersion for at least 30 minutes. Use them to shine light on your work while keeping your hands free. All can cast either a spot beam with a bright center for long distances, or a uniform flood beam for close-up tasks and inspection work. These headlamps are tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Styles A and B can be used as a flashlight—just snap them out of the strap. Wrap them around a hard hat with their rubber-coated elastic strap, or attach them with the included clips. The strap is reflective, so drivers will see you. These headlamps have a battery life indicator to let you know when to recharge. If you need these headlamps to work right away and can’t wait for them to charge, you can use disposable batteries instead of their rechargeable one. Style A works with two CR123 batteries. Style B works with three AAA batteries.

Style C fit on a welding helmet or hard hat without weighing down the front of your head. The battery pack is in the back to balance the weight. You can also hang the pack off your belt by adding the included extension cable. To connect these headlamps to a welding helmet, use the included snap-together fasteners. To wrap around a hard hat, attach the rubber strap—no clips required. A battery life indicator lets you know when to recharge.

On headlamps with color options, the green beam shows more contrast than the red beam, but it can interfere with your ability to see in dark conditions. The red beam lets you see in low light without disrupting your night vision.

IP68-rated headlamps can be submerged in water for more than 30 minutes. They’re also sealed against dust.

Light up work even when your visor is up. These headlamps come with three attachments that fit with anything from your hard hat to your baseball cap. A strong magnet connects the light to the attachments, so swap between them in a snap. When you need close-up illumination, detach the light and hold it as a task light.

Rated IP54, these headlamps are sealed against dust and splashing liquids. They’re tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as brightness, battery life, and beam distance. On the high beam, these lamps will illuminate the length of a football field.

Twist the head to adjust from a narrow spotlight to a wide floodlight. These headlamps are rechargeable and include a spare rechargeable battery. If you aren’t near an outlet or you can’t wait for a recharge, they’ll also run on three disposable AAA batteries.

Light up work while staying visible in high-risk areas. These headlamps have LEDs on the head band so forklift and truck drivers can see you. You can set the lights to shine steady or flash. These headlamps are tested against ANSI/Plato FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Styles A and B have lights all around the head band for 360° visibility. You can turn the front and band light on separately or simultaneously. Battery life is measured when all lights are on. They include a rubber strap you can wrap around a hard hat—no hard hat clips required. These headlamps are rated for temporary submersion in water.

Style A have a memory function that defaults to your preferred light combination when you first turn them on.

Headlamps with a spot beam have a bright center for lighting up long distances. Headlamps with a flood beam cast a uniform spread of light that’s good for close-up tasks and inspection work.

On headlamps with color options, the red beam lets you see in low light without disrupting your night vision. The green beam shows more contrast than the red beam, but it can interfere with your ability to see in dark conditions.

Light up work without risking an explosion. NEC rated, these headlamps are safe to use in areas with ignitable concentrations of flammable or combustible gases, vapors, and liquids. Swap the elastic strap with the included rubber strap to wear them around a hard hat—no clips required. To attach them to a welding helmet, use the included snap-together fastener. IP rated, you can drop them in water and they’ll still work. These headlamps are tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Intrinsically safe headlamps cannot cause an explosion, so they're a better choice where hazardous material is present in normal operating conditions.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

Illuminate small spaces and mark locations with these reusable lightsticks.

Lightsticks with rechargeable batteries are best for lighting up small spaces. Press the button to turn them on and select the color of the beam. Charge them with a micro-USB cord (not included). They’ll glow red when charging and turn off when they’re done. To save battery, their lockout function keeps them from turning on by accident. Rated IP07, you can drop them in water and they’ll still work. These lightsticks have an S-hook for easy hanging.

360° lightsticks provide area-wide illumination.

Bring light to areas that don't have electrical power service. These lights have an impact-resistant plastic lens to protect their LEDs. No need to swap out disposable batteries—just charge these flashlights up and they’re ready to go.

Style A have a swiveling hook and magnetic back for flexible mounting options. You can fold away the hook when not in use. They cast a neutral light that’s often found in workspaces.

Style B are a good choice if you are working close to your light—their wide-angle lens disperses the light. They can also be used like a flashlight by turning on the bulb at the end of the light, which produces a narrow spot beam. Good for inspecting, they have a cool appearance that highlights white and blue tones.

Because these lights are compatible with DeWalt rechargeable batteries, you can keep one type of cordless tool battery on hand. Their head pivots to aim light where it's needed in areas that don't have electrical power service. Hang them by the hook or stand them up for hands-free illumination. To protect the LEDs, their plastic lens resists impact.

Style C are our brightest option—they have four LEDs instead of one.

Style D have a 360° swiveling hook that locks in place so you can point light where it’s needed. Hang them on pipe up to 2" in diameter.

Note: Battery life depends on the size of your battery.