We will reply to your message within an hour.
More
Form elbows and bends with this hose and it will hold its shape without support.
Rugged, yet pliable PVC makes this a good general purpose hose for venting smoke, propane fumes, and water-based paint fumes.
Let go of this hose and it will spring back out of your way.
With the smallest bend radius of all the fume hose we offer, this lightweight hose can handle tight turns around equipment.
If you’re tight on storage space, this hose compresses down to a small size.
Hose has a single thin layer of PVC-coated fiberglass for venting smoke, water-based paint fumes, and welding fumes.
Combining the heat resistance of metal with the flexibility of fabric, this fiberglass hose has a special coating that stands up to high temperatures.
Not only does this hose stand up to corrosive fumes, it has a metal spiral on the outside that acts as a wear strip to protect against damage.
Vent smoke, water-based paint fumes, and welding fumes with this hose that gives you a clear view inside your line.
Alumina-coated glass fabric withstands extreme temperatures like stainless steel, but is much more flexible.
A nonstick PTFE liner gives this hose the ability to handle corrosive fumes such as smoke, paint fumes, hydrochloric acid fumes, and toluene fumes.
Unlike other duct hose that has a metal spiral, this hose has a plastic spiral that will not rust.
Commonly used in garages, this thick rubber hose will bounce back when stepped on or driven over.
A good general purpose hose for blowing and vacuum applications, this hose is for use with grinding dust, sawdust, and lint.
The neoprene coating on this hose holds up under high heat.
In addition to offering excellent abrasion resistance, this hose meets UL 94 HB for flame retardance.
Hose has a flexible plastic spiral that bounces back to its original shape when stepped on.
This general purpose hose for blowing and vacuum applications has a thick PVC wear strip that protects against damage caused by dragging.
This white hose makes dirt and other contaminants easy to spot.
The smooth interior prevents dust from getting trapped and building up inside the hose.
The small bend radius makes this hose easy to wrap around corners and install in tight spaces.
A blend of rubber and plastic creates a hose that's flexible, yet tough enough to handle abrasive particles such as grinding dust and sawdust. It's also known as TPU (thermoplastic polyurethane).
The neoprene coating on this hose contains carbon to dissipate static when hose is installed in a grounded system.
Bend this hose in any direction and it will hold its shape without support.
Step on this polypropylene hose and the flexible plastic spiral will pop back up unharmed.
The most compressible hose we offer, this duct hose collapses to 5% of its length for easy storage.
Super thin and lightweight, this hose is economical and rolls up for easy disposal.
A general purpose duct hose for blowing and venting air, this polyester hose is lightweight and has a wear strip to protect against damage.
The ends of this hose have a belt-and-buckle connection that eliminates the need for clamps.
Insulated with a layer of fiberglass, this ultra-thin lightweight hose keeps air at a constant temperature.
A metalized polyester cover reflects heat so the temperature inside the hose won’t rise.
Our most versatile duct hose for blowing and venting air, this polyester hose is lightweight and very flexible.
A layer of fiberglass insulation helps maintain the temperature inside the hose. Use for heating and cooling applications in outdoor environments.
An acrylic coating allows this polyester hose to hold up under higher temperatures than other fabric hose.
Unlike fabric duct hose, this lightweight aluminum hose can bend around corners and hold its shape.
Blow jagged, abrasive materials through this hose without worrying about punctures or tears. It’s made of extra--thick TPU (thermoplastic polyurethane).
Hose has a plastic spiral that acts as a wear strip to protect against damage.
SBR (styrene butadiene rubber) is blended with carbon, which dissipates static electricity without the need for a grounding wire.
These short lengths of hose have a collar on each end to prevent the clamp from slipping off.
A polyurethane liner gives this hose extra strength to handle high pressure and vacuum applications.
Tough, resilient EVA (ethylene vinyl acetate) offers excellent impact resistance and is long lasting.
Lightweight, yet strong, this aluminum hose bends and maintains its shape without support.
A thick layer of PVC with a metal spiral lets this hose handle particles heavier than dust, including cardboard fibers.
The neoprene coating on this hose withstands continuous motion without weakening.
Don’t worry about crushing this hose if you step on it—it has a flexible plastic spiral that springs back to its original shape.
Tough both inside and out, this durable polyurethane hose has a metal spiral that acts as a wear strip to protect against damage.
Hose meets UL 94 V-2 for flame retardance.
The hose’s embedded metal spiral along with carbon-filled fittings divert static electricity when hose is grounded and used with a metal suction tube.
Not only is TPU (Thermoplastic polyurethane) tough enough to handle heavy particles and cardboard fibers, the material is clear so you can monitor flow.
Position this hose in any direction and it will hold its shape.
Blow grain, sugar, flour, and powders through this hose—it’s made of FDA listed material. Hose has a metal spiral that dissipates static when used in a grounded system.
Step on or drive over this hose without causing damage.
A small bend radius lets this hose twist and turn to fit in cramped spaces.
A smooth interior allows for unrestricted flow and makes this hose easy to clean.
Run water, mist, oil, and other liquids through this hose.
If your liquid contains some solid particles, this tough EPDM rubber hose can handle the extra abrasion.
Transfer material from sifters, feeders, and strainers to other parts of your sanitary line with these hose lengths and fittings.
Also known as FMC, this conduit offers the crush resistance of metal combined with flexibility to handle bends in tight spaces.
Protect fiber optic cable with this small-diameter conduit.
Attach conduit to a knockout in an outlet box or enclosure.
Join pieces of conduit.
Also known as antishort bushings, these grommets slide into the ends of conduit and armored cable to protect wire and cable from sharp edges.
Attach conduit and armored cable to a knockout in an outlet box or enclosure.
Connect different sizes of conduit.
Preventing wear and cracks, these grommets shield the sections of your conduit that rub and bang against nearby components.
Make tight bends in machine and equipment wiring.
Thicker corrugations make this conduit more crush resistant than standard flexible plastic conduit.
Visually identify different runs of wire and cable in machine and equipment wiring.
The spiral design makes this conduit more flexible than abrasion-resistant liquid-tight flexible plastic conduit.
Also known as Type B, this conduit is more crush and abrasion resistant than liquid-tight flexible plastic conduit.
These fittings seal out liquids when connecting liquid-tight flexible metal conduit to a knockout in an outlet box or enclosure.
The toughest liquid-tight flexible metal conduit we offer, this resists oil, chemicals, and extreme temperature fluctuations.
In addition to resisting oil, this conduit resists lubricants and grease.
When used with liquid-tight fittings, this conduit seals out liquid. The steel core provides crush resistance, and the cover is UV light resistant.
Even in temperatures as low as -50° F and as high as 220° F, this conduit stays flexible.
Run conduit in food areas—the cover can be cleaned and sterilized without weakening or splitting. This conduit meets NSF/ANSI standard 169 for special-purpose food equipment.
These adapters provide electromagnetic interference (EMI) protection when connecting shielded flexible plastic conduit to a knockout in an outlet box or enclosure.
Covered with a copper braid, this conduit protects wire and cable from electromagnetic interference (EMI) caused by motors and other equipment.
In addition to continuous-motion applications such as robotics, this conduit is suitable for high-vibration applications.
One end twists into a piece of conduit for a quick connection; the other end attaches to a knockout in an outlet box or enclosure.
Also known as Type A, this conduit meets the demands of continuous motion while sealing out liquid when used with liquid-tight fittings.
These fittings seal out liquid when used with continuous-flex liquid-tight plastic conduit.
Transition between conduit sizes and types.
Transition between types of conduit.
Cut as much strap as you need to hang duct, pipe, and other materials.