These all-metal expansion joints can handle high temperatures up to 800° F.

The PTFE body on these expansion joints has a super-smooth surface that stands up to corrosive chemicals.

These joints are designed for vertical use in drain, waste, and vent systems.

Connect two pipes that are up to 100 feet apart—cut the connector to the length you need and attach a clamp to each end.

Made of stainless steel, these U-joints offer excellent corrosion resistance.

These steel U-joints meet MIL-U-20625A Class A and have hardened yoke ears for added strength and durability.

Made of stainless steel, these U-joints offer excellent corrosion resistance. They also meet MIL-U-20625A Class A.

Stainless steel hubs allow these U-joints to handle harsh environments.

Connect misaligned shafts in sanitary environments such as food, cosmetic, and pharmaceutical plants.

Made of stainless steel, these U-joints offer excellent corrosion resistance.

Stainless steel U-joints are more corrosion resistant than steel U-joints.

A set of gears transmit rotary motion at angles up to 136°—the widest angle of all our U-joints. They are for hand-powered, low-speed applications.

Adjust the length of these U-joints between 2 3/4" to 3" to fit your application.

Customize the bore size of these joints to fit your shaft. Each end has a small centered starter hole that makes drilling easy.

Tighten the set screws to fasten these couplings to your shaft. Set screws bite into the shaft to hold the couplings in place.

Designed to grip evenly around your shaft, these couplings provide more holding power than set screw couplings without marring the shaft.

Specially designed ridges allow these bellows couplings to compensate for more misalignment than other precision couplings—useful for low-torque, high-precision applications such as instrumentation and motion control.

An acetal plastic spacer at the center of these couplings insulates bearings, encoders, and other shaft components from stray electric current. Use them with servomotors, which sometimes generate current that travels down the shaft and can damage circuit boards, interfere with readings, and cause wear on bearing raceways.

Able to handle high twisting forces as well as misalignment, these couplings are good for high-performance servomotor applications.

Designed to grip evenly around your shaft, these couplings provide more holding power than set screw couplings without marring the shaft.

Customize the bore of these flexible couplings to align uncommon shaft sizes as well as shafts that have become undersized from wear or oversized from coatings.

Each hub includes a set screw, which bites into your shaft to hold the coupling in place.

Also known as Schmidt couplings, these handle higher angular misalignment than other three-piece couplings. Good for applications with varying shaft misalignment, they're commonly used with conveyor rollers and roller feeds in printing and packaging machines.

A strip of flexible spring steel wraps around the teeth of both hubs to absorb sharp, momentary load increases that can come from motor startups, emergency braking, or sudden impact with hard objects.

With a rigid gear design, these steel couplings transmit more torque than other couplings of the same size.

With a rugged roller-chain design, these couplings provide excellent torque and angular misalignment capacities.

Made with lightweight nylon sleeves, these gear couplings require less energy to move than other high-torque flexible couplings. They compensate for parallel, angular, and axial misalignment.

With a strong steel core, a protective plastic case, and bearings, these shafts handle the demands of high-torque applications.

If they exceed maximum torque, these couplings disengage, sound an alarm, and then automatically re-engage once the overtorque condition is eliminated.