These lights cast a narrower beam than other gooseneck-arm machine lights. Reposition them faster and more easily than articulating-arm lights. They have a durable glass lens that's sealed to keep out fluids, chips, and shavings, so they can be mounted directly inside machines. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. They produce a cool or daylight appearance that highlights white/blue tones, which is good for inspecting.

IP65 lights are dust tight and protect against low-pressure washdowns, such as water from a garden hose. IP67 lights withstand temporary submersion in a maximum of one meter of water for up to 30 minutes, so they are built tougher than needed for machine environments.

Bases allow you to convert Style A lights with a 24" arm reach and Style C lights from a fastener mount to a clamp-on or magnetic mount.

Power supplies, also known as transformers, convert your facility's 120 or 240 AC voltage into 24V DC voltage.

Shine light on machinery and through the sight glass on tanks to inspect food, brewery, chemical, pharmaceutical, and bio-tech processing lines. Made of stainless steel, these lights withstand frequent washdowns with harsh cleaners and sanitizers. With a sealed lens, rounded edges, and polished surfaces, there aren’t any pits and crevices where bacteria and water can get trapped, so you can leave them mounted to machinery during cleaning. The lens will also stand up to bumps without cracking. Rated IP65 and NEMA 4X, these lights are protected against dust, dirt, corrosion, and light rinses.

Using built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. Their cool light appearance is good for inspecting, and the 25° beam angle casts a narrow beam of light to maximize brightness on the inspection area. Use the articulating arm to aim light where it’s needed. Compared to gooseneck-arm lights, these lights hold their position better, especially around vibration.

These lights have a mechanical switch that when pushed once, will turn the light on for two minutes. When pushed twice, the light will turn on for 30 minutes. When the switch is pushed and held, the light will turn on until the switch is released.

The articulating arm on these lights holds its position better than gooseneck-arm lights, especially around vibration. Mount these lights directly inside machines—they have a heat- and chemical-resistant glass lens that's sealed to keep out fluids, chips, and shavings. They’re rated IP67 to withstand temporary submersion in a maximum of one meter of water for up to 30 minutes, so they are built tougher than needed for machine environments. With built-in LEDs, these lights last longer, are more efficient, and generate less heat than other light technologies. They produce a cool light appearance that highlights white/blue tones, which is good for inspecting.

Gooseneck arms can be repositioned faster and more easily than articulating arms. Mount these lights directly inside machines—they have a heat- and chemical-resistant glass lens that's sealed to keep out fluids, chips, and shavings. They’re rated IP67 to withstand temporary submersion in a maximum of one meter of water for up to 30 minutes, so they are built tougher than needed for machine environments. These lights have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. They produce a cool light appearance that highlights white/blue tones, which is good for inspecting.

Power supplies, also known as transformers, are for use on the hardwire lights to convert your facility's 120 or 240 AC voltage into 24 DC voltage. They cannot be sold to California or Vermont due to local energy efficiency requirements.

Pivot the head to cast a narrow beam of light to exactly where it's needed. Mount these lights directly inside machines—they have a heat- and chemical-resistant glass lens that’s sealed to keep out fluids, chips, and shavings. They’re rated IP67 to withstand temporary submersion in a maximum of one meter of water for up to 30 minutes, so they are built tougher than needed for machine environments. These lights have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. They produce a cool light appearance that highlights white/blue tones, which is good for inspecting.

Power supplies, also known as transformers, convert your facility's 120 or 240 AC voltage into 24 DC voltage. They cannot be sold to California or Vermont due to local energy efficiency requirements.

Though not as bright as our miniature fiber-optic lights, these lights have built-in LEDs that last longer, are more efficient, and are more affordable. Use them to illuminate small and microscopic parts. They have a daylight appearance that highlights white/blue tones, which is good for inspecting.

These lights have a longer reach and hold their position better than gooseneck-arm lights, especially around vibration. Attach them to your workspace for additional lighting. All are furnished with LEDs that last longer, are more efficient, and generate less heat than other light technologies.

Lights with a cool or daylight appearance highlight white/blue tones, which is good for inspecting.

Faster and easier to reposition than articulating-arm lights, these gooseneck-arm lights attach to your workspace for additional lighting. They're more rugged than office desk lamps. All are furnished with LEDs that last longer, are more efficient, and generate less heat than other light technologies. They produce a warm light appearance that casts a yellow tone similar to incandescent lights.

For technical drawings and 3-D models, click on a part number.

For technical drawings and 3-D models, click on a part number.

Shine light into hard-to-reach spaces with these flexible-arm flashlights. All have a long-lasting, built-in LED that is more efficient and generates less heat than other light technologies. These flashlights cast a flood beam that creates a uniform spread of light. This is especially good for close-up tasks and inspection work. Use the momentary light setting when you need light for brief periods—the light only turns on when the button is held down. Rated IP04, they withstand liquid splashed from all angles. Their body is knurled for a nonslip grip. All lights meet ANSI/Plato FL 1, so you'll know they meet performance standards for impact resistance, run time, and beam distance.

If the power goes out, you’ll find these flashlights right away. Store them in an area that gets a lot of natural or artificial light—they’ll absorb the light and emit it in the dark. All have a nonslip grip.

Style A and C have a magnet to stick onto easily accessible magnetic surfaces, such as machines. Style C are the best choice if you need a task light. The head tilts to point light where you need it, and the bottom is flat so you can stand them up and work hands-free. In addition to a magnet, these flashlights have a clip for securing near your work.

Flashlights with a flood beam cast a uniform spread of light that’s good for close-up tasks and inspection work. Flashlights with a spot beam have a bright center for lighting up long distances. Flashlights with a spot/flood beam emit both types of light at the same time.

Flashlights that meet ANSI/PLATO FL 1 standards have been tested to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

IP08-rated flashlights withstand prolonged submersion, so they’ll still work if you drop them in water.

Tilt the head on these flashlights to aim light exactly where it's needed. They have a flat bottom, so you can work hands-free without them rolling away. You can also stand them on their end to use them as a task light. These flashlights cast a spot beam with a bright center that reaches long distances. To let you know when to recharge, they have a status indicator. These flashlights meet ANSI/PLATO FL 1, so they’ve been tested for light output, impact resistance, and battery life. Each flashlight comes with a shoulder strap for easy transport.

Flashlights with a 120° head tilt have a ribbed grip that won’t slip out of your hand.

Flashlights with a 340° head tilt have a handle that pivots open, so you can hang them from a ladder or pipe to light up work from above. If you hang them, they’re durable enough to keep working if they fall from 6 feet.

IP04-rated flashlights are sealed to keep out dripping, splashing, and falling liquids, as well as humidity. IP67-rated flashlights can be temporarily submerged, so they’ll keep working if you drop them in water. They’re also sealed against dust.

When the power goes out, these flashlights automatically light up. Keep them plugged in, and they'll switch on when there's an outage. The head tilts so you can aim light wherever you need it. Unplug them to carry them around and use them like a standard flashlight. They have a flat bottom, so you can work hands-free without them rolling away. And if you need a task light, stand them on their end and tilt the light at a right angle. Ideal for lighting up long distances, they cast a spot beam with a bright center. The status indicator lets you know when they need a recharge. Rated IP04, these flashlights withstand liquid splashed from all angles.

In addition to pivoting 210°, the light heads rotate 360° for directing light exactly where it’s needed. These flashlights are rated for use in environments where hazardous material is present. They’re also rated IP04 to withstand liquid splashed from all angles. With long-lasting, built-in LEDs, these flashlights are more efficient and generate less heat than flashlights with other light technologies. They cast a uniform beam that is especially good for close-up tasks and inspection work. Use the mounting magnet, clip, or retractable hook when you need to keep your hands free for work.

Rechargeable flashlight comes with a 120-volt AC charger that includes a 12-volt DC charging cord. This flashlight cannot be sold to Canada due to local energy efficiency regulations.

Note: Battery life is significantly reduced when flashlights are used at the high-beam light setting.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

Shine light into hard-to-reach spaces in extreme environments like oil refineries or chemical plants. These flashlights are intrinsically safe, so they won’t spark. They meet NEC standards to reduce the risk of explosions. Make sure they match the hazardous environmental rating of your facility—they’re rated NEC Class I, Division I Groups A, B, C, and D. They’re also rated IP04, so they’ll seal out humidity and liquid from all angles.

Shine them continuously or use the momentary light setting to shine the light only while holding down the button. You’ll keep a firm grip on these lights thanks to their knurled texture.

Flashlights that meet ANSI/Plato FL 1 are tested to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Wear a flashlight around your neck to keep your hands free. These lights are great when you need to wear a brimmed hat or other head gear that would interfere with a headlamp. Bend and angle the adjustable arms and they’ll stay in place. You can also wrap them around nearby objects and point them where you need light. They flood the area with a uniform beam, which is particularly good for up-close and inspection tasks.

Compared to other dock lights that can only adjust vertically and horizontally, these lights bend at any angle to direct light exactly where it's needed. They have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. These lights emit a neutral white light often found in workspaces.

For technical drawings and 3-D models, click on a part number.

A sealed head and switch keeps these lights shining in wet environments. They withstand dripping, splashing, and falling liquid. These lights swing out from the wall and adjust horizontally and vertically to illuminate loading docks and trailers. They have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. They are UL listed for wet locations.

For technical drawings and 3-D models, click on a part number.

These lights swing out from the wall to illuminate loading docks and trailers. They have a steel arm, plastic lens, and switch. All have a cord with three-prong plug and operate on 120 volts AC. Lights have four or six mounting holes (hardware not included, except Style D includes hardware). All are yellow.

Styles A-C are compatible with medium-base CFL (Compact flourescent), halogen, incandescent, and LED bulbs (sold separately). All have a zinc-plated steel guard to protect the lens.

Style D lights have built-in LEDs that last longer, are more efficient, and generate less heat than other light technologies. They produce a cool light that highlights white/blue tones, which is good for inspecting.

Replacement light heads come with a steel guard to protect the lens. Steel heads are stronger and more durable than plastic heads. Plastic heads don’t heat up as much as steel heads, and won’t dent as easily.

Illuminate signs and keyboards with a thin panel that's backlit by a circuit board of LED chips. Use the kit to light an existing display or print a custom design directly on the panel. Circuit boards have power connections on both ends; connect one end to a power source and cap the unused connection. To create two backlit panels, cut the circuit board in two and connect each half to a power source.

Illuminate workstations, enclosures, and machines.

Gooseneck lights angle to focus light in specific areas.

For technical drawings and 3-D models, click on a part number.