Thread Size Thread Size |
|---|
Material Material |
|---|
|
Specifications Met Specifications Met |
|---|
For Minimum Panel Thickness For Minimum Panel Thickness |
|---|
|
Base Length Base Length |
|---|
|
|
PEM® Part Number PEM® Part Number |
|---|
For Maximum Panel Thickness For Maximum Panel Thickness |
|---|
|
|
Base Width Base Width |
|---|
|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
Lubrication Lubrication |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
About Nuts, Materials, and Finishes
More
Mil. Spec. Rivet-Mount Nuts
Create threads in hard-to-work areas—where you can’t reach the back of a workpiece, or material is too thin to be tapped. For a strong grip, these nuts have distorted threads that increase friction with bolts. Because they mount with two rivets, they won’t spin when you’re tightening screws. However, these nuts do move inside their retainers, which lets you install bolts at a slight angle; use them to align with off-center parts. All meet military guidelines for dimensions and material.
Cadmium-plated nuts resist corrosion in industrial and saltwater environments, although will lose their corrosion resistance over 450° F. The cadmium plating also adds lubricity, making these nuts easy to install.
A286 stainless steel nuts are corrosion resistant. Silver-plated stainless steel nuts withstand temperatures up to 800° F. The silver plating also adds lubricity and prevents seizing caused by friction between nuts and bolts.
Lubricated nuts thread onto bolts smoothly.
For technical drawings and 3-D models, click on a part number.
Base | Barrel | Mounting | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Lg. | Wd. | Thick. | Dia. | Ht. | No. of Holes | Hole Dia. | Hole Ctr.-to-Ctr. | Specifications Met | Each | |
Steel—Unlubricated | |||||||||||
| 4-40 | 21/32" | 5/16" | 3/32" | 0.125" | 1/16" | 2 | 0.098" | 13/32" | MS21075-04N | 000000000 | 00000 |
| 6-32 | 11/16" | 11/32" | 3/32" | 0.172" | 5/64" | 2 | 0.098" | 7/16" | MS21075-06N | 000000000 | 0000 |
| 8-32 | 45/64" | 23/64" | 3/32" | 0.203" | 5/32" | 2 | 0.098" | 15/32" | MS21075-08N | 000000000 | 0000 |
| 10-32 | 47/64" | 13/32" | 3/32" | 0.234" | 5/32" | 2 | 0.098" | 1/2" | MS21075-3N | 000000000 | 0000 |
| 1/4"-28 | 51/64" | 1/2" | 3/32" | 0.313" | 3/16" | 2 | 0.098" | 9/16" | MS21075-4N | 000000000 | 0000 |
Cadmium-Plated Steel—Lubricated | |||||||||||
| 4-40 | 21/32" | 5/16" | 3/32" | 0.125" | 1/16" | 2 | 0.098" | 13/32" | MS21075L04N | 000000000 | 0000 |
| 6-32 | 11/16" | 11/32" | 3/32" | 0.172" | 5/64" | 2 | 0.098" | 7/16" | MS21075L06N | 000000000 | 0000 |
| 8-32 | 45/64" | 23/64" | 3/32" | 0.203" | 5/32" | 2 | 0.098" | 15/32" | MS21075L08N | 000000000 | 0000 |
| 10-32 | 47/64" | 13/32" | 3/32" | 0.234" | 5/32" | 2 | 0.098" | 1/2" | MS21075L3N | 000000000 | 0000 |
| 1/4"-28 | 51/64" | 1/2" | 3/32" | 0.313" | 3/16" | 2 | 0.098" | 9/16" | MS21075L4N | 000000000 | 0000 |
Carbon Steel—Unlubricated | |||||||||||
| 6-32 | 61/64" | 13/32" | 1/32" | 0.172" | 11/64" | 2 | 0.098" | 11/16" | MS21059-06 | 000000000 | 0000 |
| 8-32 | 61/64" | 13/32" | 1/32" | 0.203" | 7/32" | 2 | 0.098" | 11/16" | MS21059-08 | 000000000 | 0000 |
| 10-32 | 61/64" | 13/32" | 1/32" | 0.234" | 7/32" | 2 | 0.098" | 11/16" | MS21059-3 | 000000000 | 0000 |
| 1/4"-28 | 1 19/64" | 33/64" | 1/32" | 0.313" | 1/4" | 2 | 0.098" | 1" | MS21059-4 | 000000000 | 0000 |
| 5/16"-24 | 1 19/64" | 39/64" | 3/64" | 0.375" | 9/32" | 2 | 0.13" | 1" | MS21059-5 | 000000000 | 00000 |
Cadmium-Plated Carbon Steel—Lubricated | |||||||||||
| 4-40 | 61/64" | 13/32" | 1/32" | 0.141" | 9/64" | 2 | 0.098" | 11/16" | MS21059L04 | 000000000 | 0000 |
| 6-32 | 61/64" | 13/32" | 1/32" | 0.172" | 11/64" | 2 | 0.098" | 11/16" | MS21059L06 | 000000000 | 0000 |
| 8-32 | 61/64" | 13/32" | 1/32" | 0.203" | 7/32" | 2 | 0.098" | 11/16" | MS21059L08 | 000000000 | 0000 |
| 10-32 | 61/64" | 13/32" | 1/32" | 0.234" | 7/32" | 2 | 0.098" | 11/16" | MS21059L3 | 000000000 | 0000 |
| 1/4"-28 | 1 19/64" | 33/64" | 1/32" | 0.313" | 1/4" | 2 | 0.098" | 1" | MS21059L4 | 000000000 | 0000 |
| 5/16"-24 | 1 19/64" | 39/64" | 3/64" | 0.375" | 9/32" | 2 | 0.13" | 1" | MS21059L5 | 000000000 | 00000 |
| 3/8"-24 | 1 19/64" | 43/64" | 1/16" | 0.453" | 19/64" | 2 | 0.13" | 1" | MS21059L6 | 000000000 | 00000 |
A286 Stainless Steel—Lubricated | |||||||||||
| 4-40 | 21/32" | 5/16" | 3/32" | 0.125" | 1/16" | 2 | 0.098" | 13/32" | MS21076L04N | 000000000 | 00000 |
| 6-32 | 11/16" | 11/32" | 3/32" | 0.172" | 5/64" | 2 | 0.098" | 7/16" | MS21076L06N | 000000000 | 0000 |
| 6-32 | 61/64" | 13/32" | 1/32" | 0.172" | 11/64" | 2 | 0.098" | 11/16" | MS21060L06 | 000000000 | 0000 |
| 8-32 | 45/64" | 23/64" | 3/32" | 0.203" | 5/32" | 2 | 0.098" | 15/32" | MS21076L08N | 000000000 | 0000 |
| 8-32 | 61/64" | 13/32" | 1/32" | 0.203" | 7/32" | 2 | 0.098" | 11/16" | MS21060L08 | 000000000 | 0000 |
| 10-32 | 47/64" | 13/32" | 3/32" | 0.234" | 5/32" | 2 | 0.098" | 1/2" | MS21076L3N | 000000000 | 0000 |
| 10-32 | 61/64" | 13/32" | 1/32" | 0.234" | 7/32" | 2 | 0.098" | 11/16" | MS21060L3 | 000000000 | 0000 |
| 1/4"-28 | 51/64" | 1/2" | 3/32" | 0.313" | 3/16" | 2 | 0.098" | 9/16" | MS21076L4N | 000000000 | 0000 |
| 1/4"-28 | 1 19/64" | 33/64" | 1/32" | 0.313" | 1/4" | 2 | 0.098" | 1" | MS21060L4 | 000000000 | 0000 |
| 5/16"-24 | 1 1/64" | 37/64" | 7/64" | 0.391" | 7/32" | 2 | 0.13" | 23/32" | MS21076L5N | 000000000 | 00000 |
| 5/16"-24 | 1 19/64" | 39/64" | 3/64" | 0.375" | 9/32" | 2 | 0.13" | 1" | MS21060L5 | 000000000 | 00000 |
| 3/8"-24 | 1 19/64" | 43/64" | 1/16" | 0.453" | 19/64" | 2 | 0.13" | 1" | MS21060L6 | 000000000 | 00000 |
Silver-Plated A286 Stainless Steel—Unlubricated | |||||||||||
| 4-40 | 21/32" | 5/16" | 3/32" | 0.125" | 1/16" | 2 | 0.098" | 13/32" | MS21076-04N | 000000000 | 0000 |
| 6-32 | 61/64" | 13/32" | 1/32" | 0.172" | 11/64" | 2 | 0.098" | 11/16" | MS21060-06 | 000000000 | 0000 |
| 8-32 | 45/64" | 23/64" | 3/32" | 0.203" | 5/32" | 2 | 0.098" | 15/32" | MS21076-08N | 000000000 | 00000 |
| 10-32 | 47/64" | 13/32" | 3/32" | 0.234" | 5/32" | 2 | 0.098" | 1/2" | MS21076-3N | 000000000 | 0000 |
| 10-32 | 61/64" | 13/32" | 1/32" | 0.234" | 7/32" | 2 | 0.098" | 11/16" | MS21060-3 | 000000000 | 0000 |
| 1/4"-28 | 51/64" | 1/2" | 3/32" | 0.313" | 3/16" | 2 | 0.098" | 9/16" | MS21076-4N | 000000000 | 00000 |
| 1/4"-28 | 1 19/64" | 33/64" | 1/32" | 0.313" | 1/4" | 2 | 0.098" | 1" | MS21060-4 | 000000000 | 00000 |
| 5/16"-24 | 1 1/64" | 37/64" | 7/64" | 0.391" | 7/32" | 2 | 0.13" | 23/32" | MS21076-5N | 000000000 | 00000 |
Aligning Weld Nuts
Threads float inside the retainer so you can install a bolt at a slight angle to align with off-center parts. Weld these nuts to materials for a strong permanent hold or punch holes in the flanges and secure them with rivets.
Weld zinc-plated steel nuts with aluminum retainer to aluminum parts.
Weld steel nuts with steel retainer to steel parts.
For technical drawings and 3-D models, click on a part number.
Base | |||||||
|---|---|---|---|---|---|---|---|
| Thread Size | Lg. | Wd. | Thick. | Ht. | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel Nut with 5052 Aluminum Retainer | |||||||
| 10-32 | 1 1/2" | 1/2" | 3/64" | 11/32" | 10 | 000000000 | 000000 |
| 1/4"-20 | 1 3/4" | 9/16" | 1/16" | 7/16" | 10 | 000000000 | 00000 |
| 5/16"-18 | 2" | 25/32" | 1/16" | 33/64" | 10 | 000000000 | 00000 |
| 3/8"-16 | 2" | 25/32" | 1/16" | 33/64" | 5 | 000000000 | 00000 |
Steel Nut with C1008/C1010 Steel Retainer | |||||||
| 8-32 | 1 1/2" | 1/2" | 3/64" | 11/32" | 10 | 000000000 | 00000 |
| 10-24 | 1 1/2" | 1/2" | 3/64" | 11/32" | 10 | 000000000 | 00000 |
| 10-32 | 1 1/2" | 1/2" | 3/64" | 11/32" | 10 | 000000000 | 00000 |
| 1/4"-20 | 1 3/4" | 9/16" | 1/16" | 7/16" | 10 | 000000000 | 00000 |
| 1/4"-28 | 1 3/4" | 9/16" | 1/16" | 7/16" | 10 | 000000000 | 00000 |
| 5/16"-18 | 2" | 25/32" | 1/16" | 33/64" | 10 | 000000000 | 00000 |
| 5/16"-24 | 2" | 25/32" | 1/16" | 33/64" | 10 | 000000000 | 00000 |
| 3/8"-16 | 2" | 25/32" | 1/16" | 33/64" | 10 | 000000000 | 00000 |
| 3/8"-24 | 2" | 25/32" | 1/16" | 33/64" | 5 | 000000000 | 00000 |
| 1/2"-13 | 2 1/4" | 15/16" | 1/16" | 51/64" | 5 | 000000000 | 00000 |
Metric Aligning Weld Nuts
Threads float inside the retainer so you can install a bolt at a slight angle to align with off-center parts. Weld these nuts to uncoated steel for a strong permanent hold or punch holes in the flanges and secure them with rivets. The retainer is made from C1008-C1010 steel.
For technical drawings and 3-D models, click on a part number.
Stainless Steel Aligning Press-Fit Nuts for Sheet Metal
These nuts have good chemical resistance and may be mildly magnetic. They have threads that float within the body so you can install a bolt at a slight angle to align off-center parts. Knurls on the bottom of the nut hold them firmly in place. Press them into a drilled or punched hole with an installation tool or an arbor press. Installation requires access to both sides of the panel.
For technical drawings and 3-D models, click on a part number.
Head | Press-Fit Nuts | |||||||
|---|---|---|---|---|---|---|---|---|
| Thread Size | Drill Bit Size | For Min. Panel Thick. | OD | Ht. | PEM® Part No. | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||||
| 4-40 | L | 0.038" | 0.36" | 0.13" | AC-440-1 | 5 | 000000000 | 000000 |
| 4-40 | L | 0.054" | 0.36" | 0.13" | AC-440-2 | 5 | 000000000 | 0000 |
| 6-32 | 21/64" | 0.038" | 0.39" | 0.13" | AC-632-1 | 5 | 000000000 | 00000 |
| 6-32 | 21/64" | 0.054" | 0.39" | 0.13" | AC-632-2 | 5 | 000000000 | 0000 |
| 8-32 | U | 0.054" | 0.44" | 0.13" | AC-832-2 | 5 | 000000000 | 00000 |
| 10-24 | 13/32" | 0.054" | 0.47" | 0.17" | AC-024-2 | 1 | 000000000 | 0000 |
| 10-32 | 13/32" | 0.038" | 0.47" | 0.17" | AC-032-1 | 1 | 000000000 | 0000 |
| 10-32 | 13/32" | 0.054" | 0.47" | 0.17" | AC-032-2 | 5 | 000000000 | 00000 |
| 1/4"-20 | 33/64" | 0.054" | 0.6" | 0.21" | AC-0420-2 | 1 | 000000000 | 0000 |
| 1/4"-28 | 33/64" | 0.054" | 0.6" | 0.21" | AC-0428-2 | 1 | 000000000 | 0000 |
Thread | Head | Press-Fit Nuts | |||||||
|---|---|---|---|---|---|---|---|---|---|
| Size | Pitch, mm | Drill Bit Size | For Min. Panel Thick., mm | OD, mm | Ht., mm | PEM® Part No. | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | |||||||||
| M3 | 0.5 | 7.4 mm | 0.97 | 9.14 | 3.31 | AC-M3-1 | 5 | 000000000 | 00000 |
| M3 | 0.5 | 7.4 mm | 1.38 | 9.14 | 3.31 | AC-M3-2 | 1 | 000000000 | 0000 |
| M4 | 0.7 | 9.4 mm | 0.97 | 11.18 | 3.31 | AC-M4-1 | 1 | 000000000 | 0000 |
| M4 | 0.7 | 9.4 mm | 1.38 | 11.18 | 3.31 | AC-M4-2 | 1 | 000000000 | 0000 |
| M5 | 0.8 | 10.4 mm | 1.38 | 11.94 | 4.32 | AC-M5-2 | 1 | 000000000 | 0000 |
| M6 | 1 | 13.1 mm | 1.38 | 15.24 | 5.34 | AC-M6-2 | 1 | 000000000 | 0000 |
Steel Aligning Press-Fit Nuts for Sheet Metal
Threads float within the body so you can install a bolt at a slight angle to align off-center parts. These nuts have knurls on the bottom of the nut hold them firmly in place. Press them into a drilled or punched hole with an installation tool or an arbor press. Installation requires access to both sides of the panel. A zinc plating provides corrosion resistance in wet environments.
For technical drawings and 3-D models, click on a part number.
Head | Press-Fit Nuts | |||||||
|---|---|---|---|---|---|---|---|---|
| Thread Size | Drill Bit Size | For Min. Panel Thick. | OD | Ht. | PEM® Part No. | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | ||||||||
| 4-40 | L | 0.054" | 0.36" | 0.13" | AS-440-2 | 5 | 000000000 | 00000 |
| 6-32 | 21/64" | 0.054" | 0.39" | 0.13" | AS-632-2 | 5 | 000000000 | 0000 |
| 8-32 | U | 0.054" | 0.44" | 0.13" | AS-832-2 | 5 | 000000000 | 0000 |
| 10-32 | 13/32" | 0.054" | 0.47" | 0.17" | AS-032-2 | 5 | 000000000 | 0000 |
| 1/4"-20 | 33/64" | 0.054" | 0.6" | 0.21" | AS-0420-2 | 5 | 000000000 | 00000 |
Steel Snap-In Nuts
Snap these nuts into square holes in thin material. Threads float inside the retainer so you can install a bolt at a slight angle to align off-center parts. Mounting legs expand to lock the fastener in place. Install them by hand or with pliers.
Black-phosphate steel nuts are mildly corrosion resistant in dry environments.
Zinc-plated steel nuts resist corrosion in wet environments.
For technical drawings and 3-D models, click on a part number.
| Thread Size | For Panel Thick. | Square Hole Size | Wd. | Head Ht. | Pkg. Qty. | Pkg. | |
Black-Phosphate Steel | |||||||
|---|---|---|---|---|---|---|---|
| 10-24 | 0.025" to 0.063" | 0.375" to 0.38" | 0.52" | 0.25" | 25 | 000000000 | 000000 |
| 1/4"-20 | 0.025" to 0.063" | 0.375" to 0.38" | 0.52" | 0.25" | 25 | 000000000 | 0000 |
| 1/4"-20 | 0.064" to 0.105" | 0.375" to 0.38" | 0.52" | 0.25" | 25 | 000000000 | 00000 |
| 1/4"-20 | 0.093" to 0.126" | 0.375" to 0.38" | 0.52" | 0.25" | 25 | 000000000 | 0000 |
| 5/16"-18 | 0.093" to 0.126" | 0.503" to 0.508" | 0.66" | 0.3" | 10 | 000000000 | 0000 |
Zinc-Plated Steel | |||||||
| 6-32 | 0.025" to 0.063" | 0.375" to 0.38" | 0.52" | 0.25" | 25 | 000000000 | 00000 |
| 8-32 | 0.025" to 0.063" | 0.375" to 0.38" | 0.52" | 0.25" | 25 | 000000000 | 00000 |
| 8-32 | 0.064" to 0.105" | 0.375" to 0.38" | 0.52" | 0.25" | 25 | 000000000 | 00000 |
| 8-32 | 0.093" to 0.126" | 0.375" to 0.38" | 0.52" | 0.25" | 10 | 000000000 | 0000 |
| 10-24 | 0.025" to 0.063" | 0.375" to 0.38" | 0.52" | 0.25" | 25 | 000000000 | 00000 |
| 10-24 | 0.064" to 0.105" | 0.375" to 0.38" | 0.52" | 0.25" | 25 | 000000000 | 00000 |
| 10-32 | 0.025" to 0.063" | 0.375" to 0.38" | 0.52" | 0.25" | 25 | 000000000 | 00000 |
| 10-32 | 0.064" to 0.105" | 0.375" to 0.38" | 0.52" | 0.25" | 25 | 000000000 | 00000 |
| 10-32 | 0.093" to 0.126" | 0.375" to 0.38" | 0.52" | 0.25" | 25 | 000000000 | 00000 |
| 1/4"-20 | 0.025" to 0.063" | 0.375" to 0.38" | 0.52" | 0.25" | 25 | 000000000 | 00000 |
| 1/4"-20 | 0.064" to 0.105" | 0.375" to 0.38" | 0.52" | 0.25" | 25 | 000000000 | 00000 |
| 1/4"-20 | 0.093" to 0.126" | 0.375" to 0.38" | 0.52" | 0.25" | 25 | 000000000 | 00000 |
| 1/4"-20 | 0.125" to 0.156" | 0.375" to 0.38" | 0.53" | 0.25" | 25 | 000000000 | 00000 |
| 5/16"-18 | 0.028" to 0.056" | 0.503" to 0.508" | 0.66" | 0.3" | 10 | 000000000 | 0000 |
| 5/16"-18 | 0.057" to 0.092" | 0.503" to 0.508" | 0.66" | 0.3" | 10 | 000000000 | 0000 |
| 5/16"-18 | 0.093" to 0.126" | 0.503" to 0.508" | 0.66" | 0.3" | 10 | 000000000 | 0000 |
| 5/16"-18 | 0.127" to 0.162" | 0.503" to 0.508" | 0.66" | 0.3" | 10 | 000000000 | 00000 |
| 3/8"-16 | 0.028" to 0.056" | 0.503" to 0.508" | 0.66" | 0.3" | 10 | 000000000 | 00000 |
| 3/8"-16 | 0.093" to 0.126" | 0.503" to 0.508" | 0.66" | 0.3" | 10 | 000000000 | 0000 |
| 3/8"-16 | 0.162" to 0.21" | 0.573" to 0.578" | 0.87" | 0.41" | 1 | 000000000 | 0000 |
| 3/8"-16 | 0.24" to 0.26" | 0.588" to 0.593" | 0.87" | 0.41" | 1 | 000000000 | 0000 |
| 1/2"-13 | 0.093" to 0.126" | 0.588" to 0.593" | 0.87" | 0.41" | 5 | 000000000 | 00000 |
Metric Zinc-Plated Steel | |||||||
| M6 | 0.635mm to 1.6mm | 0.375" to 0.38" | 0.52" | 0.25" | 25 | 000000000 | 00000 |
| M6 | 1.626mm to 2.667mm | 0.375" to 0.38" | 0.52" | 0.25" | 25 | 000000000 | 00000 |
Stainless Steel Snap-In Nuts
These nuts have good chemical resistance and may be mildly magnetic. Snap them into square holes in thin material. Threads float inside the retainer so you can install a bolt at a slight angle to align with off-center parts. Mounting legs expand to lock the fastener in place. They can be installed by hand or with pliers.
For technical drawings and 3-D models, click on a part number.
| Thread Size | Thread Pitch | For Panel Thick. | Square Hole Size | Wd. | Head Ht. | Pkg. Qty. | Pkg. | |
18-8 Stainless Steel | ||||||||
|---|---|---|---|---|---|---|---|---|
| 10-24 | __ | 0.025" to 0.063" | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 00000 |
| 10-24 | __ | 0.064" to 0.105" | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
| 10-24 | __ | 0.093" to 0.126" | 0.343" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 00000 |
| 10-24 | __ | 0.125" to 0.156" | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 00000 |
| 10-32 | __ | 0.025" to 0.063" | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
| 10-32 | __ | 0.064" to 0.105" | 0.375" to 0.38" | 0.49" | 0.25" | 5 | 000000000 | 0000 |
| 10-32 | __ | 0.093" to 0.126" | 0.343" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 00000 |
| 10-32 | __ | 0.125" to 0.156" | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 00000 |
| 1/4"-20 | __ | 0.025" to 0.063" | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
| 1/4"-20 | __ | 0.064" to 0.105" | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
| 1/4"-20 | __ | 0.093" to 0.126" | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
| 1/4"-20 | __ | 0.125" to 0.156" | 0.343" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
Metric 18-8 Stainless Steel | ||||||||
| M5 | 0.8mm | 0.635mm to 1.6mm | 0.343" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
| M5 | 0.8mm | 1.626mm to 2.667mm | 0.343" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
| M5 | 0.8mm | 2.362mm to 3.2mm | 0.343" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
| M5 | 0.8mm | 3.175mm to 3.962mm | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
| M6 | 1mm | 0.635mm to 1.6mm | 0.343" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
| M6 | 1mm | 1.626mm to 2.667mm | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
| M6 | 1mm | 2.362mm to 3.2mm | 0.343" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
| M6 | 1mm | 3.175mm to 3.962mm | 0.375" to 0.38" | 0.52" | 0.25" | 5 | 000000000 | 0000 |
Metric Clip-On Nuts for Flanged Edges
--11177024b411582304949-p9@halfx_637181330299885752.png?ver=imagenotfound)
Slide these nuts on the edge of a panel and position them by hand. Also known as G-style clip-on nuts, they have threads that float inside the retainer so you can install a bolt at a slight angle to align off-center parts. A zinc plating provides corrosion resistance in wet environments.
For technical drawings and 3-D models, click on a part number.
Thread | ||||||
|---|---|---|---|---|---|---|
| Size | Pitch, mm | For Panel Thick., mm | Distance from Ctr. of Hole to Edge (A), mm | Pkg. Qty. | Pkg. | |
Zinc-Plated Steel | ||||||
| M5 | 0.8 | 1.75 to 2 | 7.23 | 10 | 000000000 | 00000 |