For Use With For Use With | Show |
|---|
|
For Use With For Use With | Hide |
|---|
Float Material Float Material |
|---|
|
Input Voltage Input Voltage |
|---|
|
|
Mounting Orientation Mounting Orientation |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Switch Starting Position Switch Starting Position |
|---|
|
Mount Type Mount Type |
|---|
|
Electrical Connection Type Electrical Connection Type |
|---|
|
Maximum Pressure Maximum Pressure |
|---|
|
Stem Material Stem Material |
|---|
|
Current Current |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Body Material Body Material |
|---|
|
Insertion Depth Insertion Depth |
|---|
|
|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Application Application |
|---|
|
About Float Switches
More
Vertical-Mount Float Switches for Chemicals
Mount these switches from outside the tank through a threaded connection at the top or bottom of your tank. They activate process equipment such as pumps or motors when the chemical level in your tank reaches the float. Choose the switch with a stainless steel float for durability in harsh conditions.
Switches with splash guard minimize false switch activation caused by splashing liquid.
For technical drawings and 3-D models, click on a part number.
| Pipe Size  | Thread Type | Gender | Min. Specific Gravity | Max. Pressure | Temp. Range, °F | Insertion Dp. | Switch Starting Position | Industry Designation | Current | Float Ht. | Overall Dia. | Electrical Connection | Each | |
120V AC/240V AC Input Voltage | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Polypropylene Plastic Float | ||||||||||||||
| 1/4 | NPT | Male | 0.85 | 100 psi @ 70° F | 35° to 220° | 2 7/8" | 1 Off (Normally Open)/1 On (Normally Closed) | SPST-NO SPST-NC | 0.5 A @ 120 V AC | 2" | 1 1/2" | Wire Leads | 00000000 | 000000 |
| 1/4 | NPT | Male | 0.85 | 100 psi @ 70° F | 35° to 220° | 2 7/8" | 1 Off (Normally Open)/1 On (Normally Closed) | SPST-NO SPST-NC | 1 A @ 120 V AC | 2" | 1 1/2" | Wire Leads | 00000000 | 00000 |
Polypropylene Plastic Float with Splash Guard | ||||||||||||||
| 1/8 | NPT | Male | 0.9 | 100 psi @ 70° F | 35° to 220° | 1 7/8" | 1 Off (Normally Open)/1 On (Normally Closed) | SPST-NO SPST-NC | 0.3 A @ 120 V AC | 1" | 1 1/2" | Wire Leads | 00000000 | 00000 |
| 1/4 | NPT | Male | 0.85 | 100 psi @ 70° F | 35° to 220° | 2 7/8" | 1 Off (Normally Open)/1 On (Normally Closed) | SPST-NO SPST-NC | 0.5 A @ 120 V AC | 2" | 2" | Wire Leads | 00000000 | 00000 |
PVDF Plastic Float with Splash Guard | ||||||||||||||
| 1/8 | NPT | Male | 0.95 | 15 psi @ 70° F | 35° to 220° | 1 7/8" | 1 Off (Normally Open)/1 On (Normally Closed) | SPST-NO SPST-NC | 0.3 A @ 120 V AC | 1" | 1 1/2" | Wire Leads | 00000000 | 00000 |
316 Stainless Steel Float with Splash Guard | ||||||||||||||
| 1/4 | NPT | Male | 0.65 | 200 psi @ 70° F | 35° to 480° | 2 15/16" | 1 Off (Normally Open)/1 On (Normally Closed) | SPST-NO SPST-NC | 0.5 A @ 120 V AC | 2 1/8" | 2 3/8" | Wire Leads | 0000000 | 00000 |
Vertical-Mount Float Switches with Brackets for Chemicals
Use the included bracket to mount these switches to the inside of your tank. They activate process equipment such as pumps or motors when the chemical level in your tank reaches the float. A splash guard minimizes false switch activation caused by splashing liquid. Choose the switch with a stainless steel float for durability in harsh conditions.
For technical drawings and 3-D models, click on a part number.
| Min. Specific Gravity | Max. Pressure | Temp. Range, °F | Insertion Dp. | Switch Starting Position | Industry Designation | Current | Float Ht. | Overall Dia. | Each | |
120V AC/240V AC Input Voltage | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Polypropylene Plastic Float with Splash Guard | ||||||||||
| 0.85 | 100 psi @ 70° F | 35° to 220° | 3 7/8" | 1 Off (Normally Open)/1 On (Normally Closed) | SPST-NO SPST-NC | 0.5 A @ 120 V AC | 2" | 2 1/2" | 0000000 | 000000 |
316 Stainless Steel Float with Splash Guard | ||||||||||
| 0.65 | 85 psi @ 70° F | 35° to 230° | 3 7/8" | 1 Off (Normally Open)/1 On (Normally Closed) | SPST-NO SPST-NC | 0.5 A @ 120 V AC | 2" | 2 1/2" | 0000000 | 000000 |
Through-Wall Vertical-Mount Float Switches for Chemicals
Install these switches into an unthreaded hole at the top or bottom of your tank and secure with a nut from inside the tank. They activate process equipment such as pumps or motors when the chemical level in your tank reaches the float.
For technical drawings and 3-D models, click on a part number.
| For Hole Dia. | Min. Specific Gravity | Max. Pressure | Temp. Range, °F | Insertion Dp. | Switch Starting Position | Industry Designation | Current | Float Ht. | Overall Dia. | Electrical Connection | Includes | Each | |
120V AC Input Voltage | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Polypropylene Plastic Float | |||||||||||||
| 3/8" | 0.7 | 50 psi @ 70° F | 35° to 220° | 1 1/4" | 1 Off (Normally Open) | SPST-NO | 0.12 A @ 120 V AC | 5/8" | 9/16" | Wire Leads | Mounting Nut | 00000000 | 000000 |
| 3/8" | 0.7 | 50 psi @ 70° F | 35° to 220° | 1 1/4" | 1 On (Normally Closed) | SPST-NC | 0.12 A @ 120 V AC | 5/8" | 9/16" | Wire Leads | Mounting Nut | 00000000 | 00000 |
Through-Wall Horizontal-Mount Float Switches for Chemicals
Mount these switches through an unthreaded hole in your tank wall and secure with a nut from outside the tank. They activate process equipment such as pumps or motors when the chemical level in your tank reaches the float.
Switch with splash guard minimizes false switch activation caused by splashing liquid.
For technical drawings and 3-D models, click on a part number.
Float Switches | Replacement Floats | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Hole Dia. | Min. Specific Gravity | Max. Pressure | Temp. Range, °F | Insertion Dp. | Switch Starting Position | Industry Designation | Current | Float Material | Electrical Connection | Includes | Each | Each | ||
120V AC/240V AC Input Voltage | ||||||||||||||
316 Stainless Steel Body with Splash Guard | ||||||||||||||
| 3/8" | 0.8 | 300 psi @ 70° F | -40° to 390° | 2 9/16" | 1 Off (Normally Open)/1 On (Normally Closed) | SPST-NO SPST-NC | 0.28 A @ 120 V AC | 316 Stainless Steel | Wire Leads | Mounting Nut | 00000000 | 000000 | 0000000 | 000000 |
316 Stainless Steel Body | ||||||||||||||
| 1/2" | 0.8 | 100 psi @ 70° F | -40° to 390° | 3 3/16" | 1 Off (Normally Open)/1 On (Normally Closed) | SPST-NO SPST-NC | 0.28 A @ 120 V AC | 316 Stainless Steel | Wire Leads | Mounting Nut | 00000000 | 00000 | 000000 | 00 |
| Replacement Clip for Float Switches with Splash Guard | 00000000 | Each | 00000 |
Horizontal-Mount Float Switches for Chemicals
Install these switches into a threaded connection in your tank wall from outside the tank. They activate process equipment such as pumps or motors when the chemical level in your tank reaches the float.
Switches with splash guard minimize false switch activation caused by splashing liquid.
For technical drawings and 3-D models, click on a part number.
Pipe | Conduit | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Thread Type | Gender | Min. Specific Gravity | Max. Pressure | Temp. Range, °F | Insertion Dp. | Switch Starting Position | Industry Designation | Current | Float Material | Trade Size | Thread Type | Gender | Each | |
120V AC/240V AC Input Voltage | |||||||||||||||
PVDF Plastic Body | |||||||||||||||
| 1/2 | NPT | Male | 0.85 | 100 psi @ 70° F | -40° to 220° | 2 3/4" | 1 Off (Normally Open)/1 On (Normally Closed) | SPST-NO SPST-NC | 0.28 A @ 120 V AC | PVDF Plastic | 1/2 | NPT | Male | 0000000 | 000000 |
PVDF Plastic Body with Splash Guard | |||||||||||||||
| 1 | NPT | Male | 0.85 | 100 psi @ 70° F | -40° to 220° | 1 7/8" | 1 Off (Normally Open)/1 On (Normally Closed) | SPST-NO SPST-NC | 0.28 A @ 120 V AC | PVDF Plastic | 1/2 | NPT | Male | 0000000 | 00000 |
Polypropylene Plastic Body | |||||||||||||||
| 1/2 | NPT | Male | 0.7 | 100 psi @ 70° F | -40° to 220° | 2 3/4" | 1 Off (Normally Open)/1 On (Normally Closed) | SPST-NO SPST-NC | 0.28 A @ 120 V AC | Polypropylene Plastic | 1/4 | NPT | Male | 00000000 | 00000 |
Polypropylene Plastic Body with Splash Guard | |||||||||||||||
| 1 | NPT | Male | 0.7 | 100 psi @ 70° F | -40° to 220° | 1 7/8" | 1 Off (Normally Open)/1 On (Normally Closed) | SPST-NO SPST-NC | 0.28 A @ 120 V AC | Polypropylene Plastic | __ | __ | __ | 00000000 | 00000 |
| 1 | NPT | Male | 0.7 | 100 psi @ 70° F | -40° to 220° | 1 7/8" | 1 Off (Normally Open)/1 On (Normally Closed) | SPST-NO SPST-NC | 0.28 A @ 120 V AC | Polypropylene Plastic | 1/2 | NPT | Male | 00000000 | 00000 |
Ultrasonic Noncontact Level Switches for Chemicals
Use high-frequency sound waves to detect chemical level. This switch has three relays that can be programmed for multiple set points. Use it to activate several alarms or to automate tank filling and emptying. It’s rated NEMA 4X for protection from corrosion and washdowns.
For technical drawings and 3-D models, click on a part number.
Pipe | Conduit | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Thread Type | Gender | Sensing Distance, ft. | Max. Pressure | Temp. Range, °F | Switch Starting Position | Industry Designation | Current | Lg. | Wd. | Electrical Connection | Environmental Rating | Trade Size | Thread Type | Gender | Each | |
95V AC/250V AC Input Voltage | |||||||||||||||||
Polycarbonate Plastic Body | |||||||||||||||||
| 1 | NPT | Male | 0.33-9.8 | 30 psi @ 70° F | -5° to 140° | 1 Off (Normally Open) or 1 On (Normally Closed) | SPDT | 0.5 A @ 120 V AC | 3 15/16" | 5 3/16" | Screw Terminals | IP65, NEMA 4X | 1/2 | NPT | Female | 0000000 | 0000000 |
Capacitive Noncontact Level Switches for Chemicals
This switch mounts to the outside of your tank and detects chemical level through plastic tank walls by measuring the capacitance between the switch and tank contents; it cannot be used with metal tanks. Mount switch horizontally or vertically with the included mounting bracket.
For technical drawings and 3-D models, click on a part number.
| Dia. | Lg. | Temp. Range, °F | Switch Starting Position | Industry Designation | Current | Electrical Connection | Specifications Met | Each | |
20V AC/240V AC Input Voltage | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1 3/16" | 3" | -10° to 175° | 1 Off (Normally Open)/1 On (Normally Closed) | SPST-NO SPST-NC | 0.25 A @ 240 V AC | Wire Leads | UL Listed, CSA Certified | 0000000 | 0000000 |
Infrared Noncontact Level Switches for Chemicals
Detect chemical level with infrared light to avoid false switch activation caused by vibration in your tank. Also known as optical switches, these sense the level by reflecting light into a receiver that sends an output current to activate an alarm or control circuit. They are sensitive to light and should be shielded or used in enclosed tanks. Mount them horizontally or vertically.
SPST-NO switches activate when the tip is submerged in liquid and light stops reflecting into the receiver.
SPST-NC switches activate when the tip is exposed to air and light reflects into the receiver.
For technical drawings and 3-D models, click on a part number.
| Pipe Size | Thread Type | Gender | Max. Pressure | Temp. Range, °F | Insertion Dp. | Switch Starting Position | Industry Designation | Output Current | Overall Lg. | Hex Size | Electrical Connection | Each | |
10V DC/40V DC Input Voltage | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Polysulfone Plastic Body | |||||||||||||
| 3/8 | BSPP | Male | 145 psi @ 70° F | 0° to 175° | 1 3/4" | 1 Off (Normally Open) | SPST-NO | 200 mA | 3" | 1 1/16" | Wire Leads | 0000000 | 0000000 |
| 3/8 | BSPP | Male | 145 psi @ 70° F | 0° to 175° | 1 3/4" | 1 On (Normally Closed) | SPST-NC | 200 mA | 3" | 1 1/16" | Wire Leads | 0000000 | 000000 |
Hazardous Location Float Switches for Chemicals
Designed for use in areas where flammable substances are present, these switches are CSA certified for hazardous locations. Mount them through a tank wall.
Style A meets Class I, Divisions 1 and 2, Groups A, B, C, and D; Class II, Divisions 1 and 2, Groups E, F, and G; and Class III, Divisions 1 and 2.
Style B meets Class I, Divisions 1 and 2, Groups C and D; Class II, Divisions 1 and 2, Groups E, F, and G; and Class III, Divisions 1 and 2.
For technical drawings and 3-D models, click on a part number.
Pipe | Conduit | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Size | Thread Type | Gender | Min. Specific Gravity | Max. Pressure | Temp. Range, °F | Insertion Dp. | Switch Starting Position | Industry Designation | Current | Float Material | Electrical Connection | Trade Size | Thread Type | Gender | Each | |
120V AC/240V AC Input Voltage | |||||||||||||||||
316 Stainless Steel Body | |||||||||||||||||
| A | 1/2 | NPT | Male | 0.7 | 300 psi @ 70° F | 0° to 390° | 4 5/8" | 1 Off (Normally Open)/1 On (Normally Closed) | SPST-NO SPST-NC | 0.28 A @ 120 V AC | 316 Stainless Steel | Wire Leads | 1/4 | NPT | Male | 00000000 | 0000000 |
| A | 1/2 | NPT | Male | 0.7 | 300 psi @ 70° F | 0° to 390° | 4 5/8" | 1 Off (Normally Open)/1 On (Normally Closed) | SPST-NO SPST-NC | 0.28 A @ 120 V AC | 316 Stainless Steel | Wire Leads | 1/2 | NPT | Male | 00000000 | 000000 |
| A | 1 | NPT | Male | 0.7 | 300 psi @ 70° F | 0° to 390° | 4 5/8" | 1 Off (Normally Open)/1 On (Normally Closed) | SPST-NO SPST-NC | 0.28 A @ 120 V AC | 316 Stainless Steel | Wire Leads | 1/2 | NPT | Male | 00000000 | 000000 |
| B | 1 1/2 | NPT | Male | 0.4 | 1,500 psi @ 70° F | 0° to 300° | 3 1/4" | 1 Off (Normally Open)/1 On (Normally Closed) | SPST-NO SPST-NC | 0.83 A @ 120 V AC | 316 Stainless Steel | Wire Leads | 1/2 | NPT | Male | 0000000 | 000000 |
| B | 2 | NPT | Male | 0.4 | 1,500 psi @ 70° F | 0° to 300° | 3 1/4" | 1 Off (Normally Open)/1 On (Normally Closed) | SPST-NO SPST-NC | 0.83 A @ 120 V AC | 316 Stainless Steel | Wire Leads | 1/2 | NPT | Male | 0000000 | 000000 |
Floats for Chemicals
Made of polyethylene, these floats can be used with chemicals, salts, and caustic fluids.
Ball floats are self-tapping when used with a threaded rod.
For technical drawings and 3-D models, click on a part number.
| Lg. | Wd. | Ht. | Thread Size | Thread Type | Gender | Max. Pressure | Temp. Range, °F | Color | For Container Type | Each | |
| 3 3/4" | 2 1/2" | 1 7/16" | 8-32 | UNC | Female | Not Rated | 35° to 140° | Off-White | Open Tank | 0000000 | 00000 |
| Dia. | Thread Size | Thread Type | Gender | Max. Pressure | Temp. Range, °F | Color | Features | For Container Type | Each | |
| 6" | 1/4"-20 | UNC | Female | Not Rated | 35° to 140° | Black | UV Resistant | Open Tank | 0000000 | 000000 |
| 6" | 5/16"-18 | UNC | Female | Not Rated | 35° to 140° | Black | UV Resistant | Open Tank | 0000000 | 00000 |
| 8" | 1/4"-20 | UNC | Female | Not Rated | 35° to 140° | Black | UV Resistant | Open Tank | 0000000 | 00000 |
| 8" | 5/16"-18 | UNC | Female | Not Rated | 35° to 140° | Black | UV Resistant | Open Tank | 0000000 | 00000 |
| 8" | 3/8"-16 | UNC | Female | Not Rated | 35° to 140° | Black | UV Resistant | Open Tank | 0000000 | 00000 |
Float Valves for Chemicals
Made of stainless steel, these float valves have excellent corrosion resistance even when exposed to chemicals.
Valves for open tanks are for use only in an open tank.
Valves for closed tanks are designed to withstand the pressure in a closed tank.
For technical drawings and 3-D models, click on a part number.
Inlet | Outlet | Float Rod | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Thread Type | Gender | Pipe Size | Thread Type | Gender | Flow Rate | Max. Pressure, psi | Float Dia. | Lg. | Thread Size | Thread Type | Float Material | Seal Material | Temp. Range, °F | Each | |
Open Tank | ||||||||||||||||
For Use With Acetone, Alcohol, Chemicals, Hydraulic Fluid | ||||||||||||||||
316 Stainless Steel Elbow Valve Body | ||||||||||||||||
| 1/2 | NPT | Female | 1/2 | NPT | Female | 30 gpm @ 50 psi | 100 | 5" | 16" | 1/4" | NPT | 304 Stainless Steel | PTFE Plastic | 35° to 350° | 0000000 | 0000000 |
| 3/4 | NPT | Female | 3/4 | NPT | Female | 50 gpm @ 50 psi | 100 | 5" | 16" | 1/4" | NPT | 304 Stainless Steel | PTFE Plastic | 35° to 350° | 0000000 | 000000 |
| 1 | NPT | Female | 1 | NPT | Female | 75 gpm @ 50 psi | 100 | 6" | 18" | 1/4" | NPT | 304 Stainless Steel | PTFE Plastic | 35° to 350° | 0000000 | 000000 |
| 1 1/2 | NPT | Female | 1 1/2 | NPT | Female | 125 gpm @ 50 psi | 100 | 6" | 18" | 1/4" | NPT | 304 Stainless Steel | PTFE Plastic | 35° to 350° | 0000000 | 00000000 |
316 Stainless Steel Straight Valve Body | ||||||||||||||||
| 1/2 | NPT | Female | 1/2 | NPT | Female | 30 gpm @ 50 psi | 100 | 5" | 16" | 1/4" | NPT | 304 Stainless Steel | PTFE Plastic | 35° to 350° | 0000000 | 000000 |
| 3/4 | NPT | Female | 3/4 | NPT | Female | 50 gpm @ 50 psi | 100 | 5" | 16" | 1/4" | NPT | 304 Stainless Steel | PTFE Plastic | 35° to 350° | 0000000 | 000000 |
| 1 | NPT | Female | 1 | NPT | Female | 75 gpm @ 50 psi | 100 | 6" | 18" | 1/4" | NPT | 304 Stainless Steel | PTFE Plastic | 35° to 350° | 0000000 | 000000 |
| 1 1/2 | NPT | Female | 1 1/2 | NPT | Female | 125 gpm @ 50 psi | 100 | 6" | 18" | 1/4" | NPT | 304 Stainless Steel | PTFE Plastic | 35° to 350° | 0000000 | 00000000 |
Closed Tank | ||||||||||||||||
For Use With Acetone, Alcohol, Chemicals, Hydraulic Fluid | ||||||||||||||||
316 Stainless Steel Elbow Valve Body | ||||||||||||||||
| 1/2 | NPT | Female | 1/2 | NPT | Female | 30 gpm @ 50 psi | 100 | 5" | 16" | 1/8" | NPT | 304 Stainless Steel | PTFE Plastic | 35° to 350° | 00000000 | 000000 |
| 3/4 | NPT | Female | 3/4 | NPT | Female | 50 gpm @ 50 psi | 100 | 5" | 16" | 1/8" | NPT | 304 Stainless Steel | PTFE Plastic | 35° to 350° | 00000000 | 000000 |
| 1 | NPT | Female | 1 | NPT | Female | 75 gpm @ 50 psi | 100 | 6" | 18" | 1/4" | NPT | 304 Stainless Steel | PTFE Plastic | 35° to 350° | 00000000 | 000000 |
| 1 1/2 | NPT | Female | 1 1/2 | NPT | Female | 125 gpm @ 50 psi | 100 | 6" | 18" | 1/4" | NPT | 304 Stainless Steel | PTFE Plastic | 35° to 350° | 00000000 | 00000000 |
316 Stainless Steel Straight Valve Body | ||||||||||||||||
| 1/2 | NPT | Female | 1/2 | NPT | Female | 30 gpm @ 50 psi | 100 | 5" | 16" | 1/4" | NPT | 304 Stainless Steel | PTFE Plastic | 35° to 350° | 00000000 | 000000 |
| 3/4 | NPT | Female | 3/4 | NPT | Female | 50 gpm @ 50 psi | 100 | 5" | 16" | 1/4" | NPT | 304 Stainless Steel | PTFE Plastic | 35° to 350° | 00000000 | 000000 |
| 1 | NPT | Female | 1 | NPT | Female | 75 gpm @ 50 psi | 100 | 6" | 18" | 1/4" | NPT | 304 Stainless Steel | PTFE Plastic | 35° to 350° | 00000000 | 000000 |
| 1 1/2 | NPT | Female | 1 1/2 | NPT | Female | 125 gpm @ 50 psi | 100 | 6" | 18" | 1/4" | NPT | 304 Stainless Steel | PTFE Plastic | 35° to 350° | 00000000 | 00000000 |
Float Valve Bodies for Chemicals
Made of stainless steel, these float valves have excellent corrosion resistance even when exposed to chemicals. Combine them with floats and rods (not included) to create float valves that meet exact specifications.
Valve bodies with a PTFE seal withstand higher temperatures than valve bodies with a fluoroelastomer seal.
For technical drawings and 3-D models, click on a part number.
Inlet | Outlet | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Thread Type | Gender | Pipe Size | Thread Type | Gender | Flow Rate | Max. Pressure, psi | For Rod Thread Size | Material | Temp. Range, °F | Each | |
Fluoroelastomer Rubber Seal | ||||||||||||
90° Elbow | ||||||||||||
| 1/2 | NPT | Female | 1/2 | NPT | Female | 48 gpm @ 50 psi | 85 | 1/4"-20 | 316 Stainless Steel | 35° to 450° | 0000000 | 0000000 |
| 3/4 | NPT | Female | 3/4 | NPT | Female | 48 gpm @ 50 psi | 85 | 1/4"-20 | 316 Stainless Steel | 35° to 450° | 0000000 | 000000 |
| 1 | NPT | Female | 3/4 | NPT | Female | 57.5 gpm @ 50 psi | 85 | 3/8"-16 | 316 Stainless Steel | 35° to 450° | 0000000 | 000000 |
| 1 1/4 | NPT | Female | 1 1/4 | NPT | Female | 140 gpm @ 50 psi | 100 | 3/8"-16 | 316 Stainless Steel | 35° to 450° | 0000000 | 00000000 |
| 1 1/2 | NPT | Female | 1 1/2 | NPT | Female | 140 gpm @ 50 psi | 100 | 3/8"-16 | 316 Stainless Steel | 35° to 450° | 0000000 | 00000000 |
| 2 | NPT | Female | 2 | NPT | Female | 140 gpm @ 50 psi | 100 | 3/8"-16 | 316 Stainless Steel | 35° to 450° | 0000000 | 00000000 |
PTFE Plastic Seal | ||||||||||||
90° Elbow | ||||||||||||
| 1/2 | NPT | Female | 1/2 | NPT | Female | 48 gpm @ 50 psi | 85 | 1/4"-20 | 316 Stainless Steel | 35° to 550° | 0000000 | 000000 |
| 3/4 | NPT | Female | 3/4 | NPT | Female | 48 gpm @ 50 psi | 85 | 1/4"-20 | 316 Stainless Steel | 35° to 550° | 0000000 | 000000 |
| 1 | NPT | Female | 3/4 | NPT | Female | 57.5 gpm @ 50 psi | 85 | 3/8"-16 | 316 Stainless Steel | 35° to 550° | 0000000 | 00000000 |
| 1 1/4 | NPT | Female | 1 1/4 | NPT | Female | 140 gpm @ 50 psi | 100 | 3/8"-16 | 316 Stainless Steel | 35° to 550° | 0000000 | 00000000 |
| 1 1/2 | NPT | Female | 1 1/2 | NPT | Female | 140 gpm @ 50 psi | 100 | 3/8"-16 | 316 Stainless Steel | 35° to 550° | 0000000 | 00000000 |
| 2 | NPT | Female | 2 | NPT | Female | 140 gpm @ 50 psi | 100 | 3/8"-16 | 316 Stainless Steel | 35° to 550° | 0000000 | 00000000 |