We will reply to your message within an hour.
Mount these switches from outside the tank through a threaded connection.
Empty and fill your tank with a single device—these dual-level switches include two float switches that actuate at different levels. Mount through a threaded connection at the top of your tank.
Use the included bracket to mount these switches to the inside of your tank.
Install these switches into a threaded connection in your tank wall from outside the tank.
Mount these switches through an unthreaded hole in your tank wall and secure with a nut from outside the tank.
For visual monitoring and easy access, these switches are housed in a clear acrylic reservoir that mounts to the outside of your tank.
For use in locations with flammable gases and combustible dust, this switch is UL listed and CSA certified for Class I, Divisions 1 and 2, Groups C and D; and Class II, Divisions 1 and 2, Groups E, F, and G.
These switches are CSA certified for hazardous locations.
Mount this switch through the top of your tank.
Install these switches through a tank wall.
The through-hole connection allows these floats to slide up and down a vertical float rod.
These floats are untethered by a float rod so they can float freely in your tank.
With a durable bronze body, these float valves can be used with water and hydraulic fluid.
Made of stainless steel, these float valves have excellent corrosion resistance even when exposed to chemicals.