Empty and fill your tank with a single device—this dual-level switch includes two float switches that actuate at different levels. Mount through a threaded connection at the top of your tank.

Install these switches into an unthreaded hole at the top or bottom of your tank and secure with a nut from inside the tank.

Install these switches into a threaded connection in your tank wall from outside the tank.

Detect water level with infrared light to avoid false switch activation caused by vibration in your tank.

Empty and fill your tank with a single device—these dual-level switches include two float switches that actuate at different levels. Mount through a threaded connection at the top of your tank.

Mount this switch through the top of your tank.

For use in locations with flammable gases and combustible dust, this switch is UL listed and CSA certified for Class I, Divisions 1 and 2, Groups C and D; and Class II, Divisions 1 and 2, Groups E, F, and G.

Detect chemical level with infrared light to avoid false switch activation caused by vibration in your tank.

The through-hole connection allows these floats to slide up and down a vertical float rod.

Use these float valves with water.

These float valves have a temperature range of 35° to 110° F.

Control water levels in spaces where a rod and lever won’t fit; these float valves have an internal float and connect to your pipe.

Smaller than other float valves, these are sized for containers with limited space.

Hang these switches in a sump pit to detect rising water levels.