Capacity Capacity |
|---|
|
Minimum Height Minimum Height |
|---|
Maximum Height Maximum Height |
|---|
|
Maximum Lift Maximum Lift |
|---|
|
|
Working Orientation Working Orientation |
|---|
|
Wheel Configuration Wheel Configuration |
|---|
 | Two Swivel and Two Rigid Casters |
 | Four Swivel Casters |
 | Two Axle- Mounted Wheels |
Base Width Base Width |
|---|
Base Length Base Length |
|---|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Handle Length Handle Length |
|---|
Capacity @ Maximum Lift Capacity @ Maximum Lift |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
Capacity @ Height Capacity @ Height |
|---|
|
Capacity @ Minimum Height Capacity @ Minimum Height |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Hydraulic Jacks with Wheels
Roll these jacks from job to job and under hard-to-reach places.
Bracket saddles provide a more secure hold and offer higher lifts than flat saddles. Designed to help mechanics perform maintenance and repair tasks on automotive transmissions, they swivel forward, backward, and side to side, to allow for easy access to all areas of your load.
Flat saddles hold larger loads than the bracket saddles and have a longer handle for more comfortable lifting.
Note: Jacks should not be moved when under load.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Saddle | Base | Wheel | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | Movement | Dia. | Lg. | Wd. | Wd. | Lg. | Ht. | Handle Lg. | Body Material | Configuration | Material | Each | |
Bracket Saddle | ||||||||||||||||
| 1/2 | 1,000 | 8 1/2"-24 3/4" | 16 1/4" | Swivel | __ | 17" | 9 3/8" | 15" | 31" | 6 1/4" | 22 1/2" | Steel | Four Swivel Casters | Steel | 0000000 | 0000000 |
| 1 | 2,000 | 7 7/8"-33 1/2" | 25 5/8" | Swivel | __ | 17" | 15 1/2" | 19 1/8" | 40 3/8" | 7 1/2" | 22 1/2" | Steel | Four Swivel Casters | Steel | 0000000 | 000000 |
Flat Saddle | ||||||||||||||||
| 2 | 4,000 | 3 1/2"-18 1/2" | 15" | Rigid | 4 1/2" | __ | __ | 11 3/4" | 25 3/4" | 6" | 45" | Aluminum | Two Swivel and Two Rigid Casters | Steel | 0000000 | 000000 |
| 3 1/2 | 7,000 | 5 1/8"-22 1/8" | 17" | Swivel | 4 3/8" | __ | __ | 15 3/4" | 30 1/8" | 6 7/8" | 52 1/4" | Steel | Two Swivel and Two Rigid Casters | Cast Iron | 0000000 | 000000 |
Hydraulic Bottle Jacks
Use these versatile jacks for lifting, spreading, bending, pushing, and straightening. For horizontal use, the pumping mechanism (where the handle meets the jack) must be positioned under the jack body.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Base | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | Ram OD | Lg. | Wd. | Handle Lg. | Body Material | Features | Each | ||
| A | 2 | 4,000 | 7"-13 5/8" | 6 5/8" | 3/4" | 4 5/8" | 3 1/8" | 13" | Steel | Removable Handle | 0000000 | 000000 |
| A | 3 | 6,000 | 7 1/2"-14 1/8" | 6 5/8" | 7/8" | 4 7/8" | 3 1/4" | 15" | Steel | Removable Handle | 0000000 | 00000 |
| A | 6 | 12,000 | 8"-16" | 8" | 1 1/4" | 4 1/2" | 4 3/4" | 12" | Steel | Removable Handle | 0000000 | 00000 |
| A | 8 | 16,000 | 7 7/8"-15 5/8" | 7 3/4" | 1 3/8" | 6" | 3 1/2" | 22" | Steel | Removable Handle | 0000000 | 00000 |
| A | 12 | 24,000 | 7 1/8"-13 3/4" | 6 5/8" | 1 3/4" | 6 3/4" | 4 3/4" | 26" | Steel | Removable Handle | 0000000 | 000000 |
| A | 12 | 24,000 | 9 3/8"-18 1/2" | 9 1/8" | 1 3/4" | 6 3/4" | 4 3/4" | 26" | Steel | Removable Handle | 0000000 | 000000 |
| A | 20 | 40,000 | 7"-12" | 5" | 2 1/8" | 7 5/8" | 5 3/4" | 32" | Steel | Removable Handle | 0000000 | 000000 |
| A | 20 | 40,000 | 10 5/8"-17 1/2" | 6 7/8" | 2 1/8" | 7 5/8" | 5 3/4" | 32" | Steel | Removable Handle | 0000000 | 000000 |
| A | 30 | 60,000 | 11"-17 5/8" | 6 5/8" | 2 3/8" | 8" | 6" | 32" | Steel | Removable Handle | 0000000 | 000000 |
| A | 50 | 100,000 | 11 3/4"-18 7/8" | 7 1/8" | 2 1/2" | 8 1/2" | 7" | 32" | Steel | Removable Handle | 0000000 | 000000 |
| B | 6 | 12,000 | 8 1/2"-20 1/2" | 12" | 1 3/4" | 4 3/4" | 5 1/4" | 27 5/8" | Steel | Removable Handle | 000000 | 000000 |
| B | 13 | 26,000 | 9 1/8"-22 1/2" | 13 3/8" | 1 7/8" | 7" | 7 3/8" | 27 5/8" | Steel | Removable Handle | 000000 | 000000 |
Low-Profile Hydraulic Bottle Jacks
These jacks have a short body to fit in low-clearance spaces. Jacks with a low-profile handle pump from side to side, requiring less vertical space than other bottle jacks. Use them for lifting, spreading, bending, pushing, and straightening. For horizontal use, the pumping mechanism (where the handle meets the jack) must be positioned under the jack body.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Jacks | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity | Base | Repair Kits | ||||||||||||
| tons | lbs. | Height | Maximum Lift | Ram OD | Dia. | Lg. | Wd. | Handle Length | Body Material | Features | Each | Each | ||
| 5 | 10,000 | 2 1/2"-3 1/4" | 3/4" | 1 1/8" | 3" | __ | __ | 9 1/2" | Steel | Low-Profile Handle, Removable Handle | 0000000 | 0000000 | 0000000 | 000000 |
| 5 | 10,000 | 3 1/2"-5" | 1 1/2" | 1 1/8" | 3" | __ | __ | 9 1/2" | Steel | Low-Profile Handle, Removable Handle | 0000000 | 000000 | 0000000 | 00000 |
| 10 | 20,000 | 4 3/4"-6" | 1 3/16" | 1 5/8" | 4 3/8" | __ | __ | 17 3/8" | Steel | Low-Profile Handle, Removable Handle | 0000000 | 000000 | 0000000 | 00000 |
| 20 | 40,000 | 5 1/8"-6 3/8" | 1 3/16" | 2 1/8" | 4 3/4" | __ | __ | 23 7/8" | Steel | Low-Profile Handle, Removable Handle | 0000000 | 000000 | 0000000 | 000000 |
| 30 | 60,000 | 7 1/4"-10 1/4" | 3 1/8" | 2 3/8" | __ | 7 5/8" | 5 5/8" | 39 3/8" | Steel | Removable Handle | 0000000 | 000000 | 0000000 | 00000 |
Heavy Duty Hydraulic Bottle Jacks
With fewer moving parts than standard bottle jacks, these are made for frequent use. The ram body screws onto the base so that it can be opened for inspection and repair. The ram is nickel-plated for corrosion resistance. Jacks can be used for lifting, spreading, bending, pushing, and straightening. For horizontal use, the pumping mechanism (where the handle meets the jack) must be positioned under the jack body.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Base | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | Ram OD | Wd. | Lg. | Handle Lg. | Body Material | Features | Each | |
| 3 | 6,000 | 8 1/2"-17" | 8 1/2" | 7/8" | 4 1/2" | 5 7/8" | 21" | Steel | Removable Handle | 0000000 | 0000000 |
| 3 | 6,000 | 10 1/4"-20 1/2" | 10 1/4" | 1 1/4" | 4 1/4" | 5 7/8" | 21" | Steel | Removable Handle | 0000000 | 000000 |
| 5 | 10,000 | 8 5/8"-17 5/8" | 9" | 1 1/4" | 4 3/4" | 6 1/4" | 21" | Steel | Removable Handle | 0000000 | 000000 |
| 5 | 10,000 | 10 1/4"-22" | 11 3/4" | 1 3/8" | 4 5/8" | 6 1/4" | 21" | Steel | Removable Handle | 0000000 | 000000 |
| 8 | 16,000 | 9 1/8"-19 1/4" | 10 1/8" | 1 3/8" | 5 1/4" | 6 1/2" | 21" | Steel | Removable Handle | 0000000 | 000000 |
| 8 | 16,000 | 11"-23 1/2" | 12 1/2" | 1 5/8" | 5 1/8" | 6 1/2" | 21" | Steel | Removable Handle | 0000000 | 000000 |
| 12 | 24,000 | 9"-19 1/2" | 10 1/2" | 1 5/8" | 5 3/4" | 6 3/4" | 21" | Steel | Removable Handle | 0000000 | 000000 |
| 20 | 40,000 | 11"-17 1/2" | 6 1/2" | 1 7/8" | 6 7/8" | 6 3/4" | 30 3/4" | Steel | Removable Handle | 0000000 | 000000 |
| 30 | 60,000 | 11 1/8"-18 1/8" | 7" | 2 1/8" | 7" | 5 1/2" | 30 3/4" | Steel | Removable Handle | 0000000 | 000000 |
| 60 | 120,000 | 12"-18 5/8" | 6 5/8" | 3 1/8" | 7 1/2" | 9 3/8" | 39 1/2" | Steel | Removable Handle | 000000 | 00000000 |
Hand-Operated Tall-Body Hydraulic Bottle Jacks
Save time pumping with jacks that are twice as tall as standard bottle jacks. Use them for lifting, spreading, bending, pushing, and straightening. Secure equipment to the ram through a mounting hole on the ram’s tip.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Base | Mounting | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | Ram OD | Wd. | Lg. | Handle Lg. | Body Material | Fasteners Included | No. of Holes | Hole Dia. | Features | Each | |
| 1 1/2 | 3,000 | 25 5/8"-43 5/8" | 18" | 7/8" | 4 1/2" | 5 7/8" | 20" | Steel | __ | __ | __ | Removable Handle | 0000000 | 0000000 |
| 3 | 6,000 | 20 3/8"-35 1/2" | 15 1/8" | 1 3/16" | 4 3/8" | 5 7/8" | 20" | Steel | No | 2 | 5/16" | Removable Handle | 0000000 | 000000 |
| 5 | 10,000 | 20 1/8"-36 5/8" | 16 1/2" | 1 3/8" | 4 5/8" | 6 1/4" | 20" | Steel | No | 2 | 3/8" | Removable Handle | 0000000 | 000000 |
| 8 | 16,000 | 30 7/8"-53 3/4" | 22 7/8" | 1 5/8" | 5 1/8" | 6 1/2" | 20" | Steel | __ | __ | __ | Removable Handle | 0000000 | 000000 |
Foot-Operated Tall-Body Hydraulic Bottle Jacks
Jacks are equipped with two foot pedals for hands-free use, one to raise the ram and another to lower it. Twice as tall as standard jacks, they save you time pumping. Use them for lifting, spreading, bending, pushing, and straightening.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Two-Height Hydraulic Jacks
These jacks are as versatile as bottle jacks, but with two lifting points—a toe for lifting loads low to the ground, and a saddle for a higher, more stable lifting point.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Toe | Saddle | Base | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Max. Lift | Ht. | Lg. | Wd. | Ht. | Lg. | Wd. | Movement | Lg. | Wd. | Handle Lg. | Body Material | Features | Each | |
| 2 | 4,000 | 4 1/2" | 5/8"-5 1/8" | 2" | 2" | 9 1/4"-13 3/4" | 3 1/2" | 2 3/8" | Rigid | 5" | 7" | 11 1/2" | Steel | __ | 0000000 | 0000000 |
| 5 | 10,000 | 4 5/8" | 1"-5 5/8" | 2 1/4" | 3" | 11 1/2"-16 1/8" | 4 3/4" | 3 3/8" | Rigid | 7 1/8" | 10 5/8" | 23 1/2" | Steel | 180° Pivoting Handle | 0000000 | 00000000 |
| 10 | 20,000 | 5 5/8" | 1 1/8"-6 3/4" | 2 3/8" | 3 1/4" | 12 7/8"-18 1/2" | 5 3/4" | 4 5/8" | Rigid | 8 5/8" | 11 1/4" | 23 1/2" | Steel | 180° Pivoting Handle | 0000000 | 00000000 |
Hydraulic Scissor Jacks
Fit these compact jacks under low-height loads. They come with a carrying case.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity @ 4 3/4" Min. Ht. | Capacity @ 10 1/4" Max. Lift | Saddle | Base | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | tons | lbs. | Ht. | Max. Lift | Max. Wd. | Movement | Lg. | Wd. | Lg. | Wd. | Handle Lg. | Body Material | Features | Each | |
| 7/8 | 1,750 | 7/8 | 1,750 | 4 3/4"-15" | 10 1/4" | 15 1/2" | Rigid | 1 15/16" | 1 7/16" | 4 5/16" | 4 1/4" | 14 3/4" | Steel | Removable Handle | 00000000 | 0000000 |
Scissor Jacks
Fit this compact jack under low-height loads.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity @ 4" Min. Ht. | Capacity @ 7" Ht. | Capacity @ 9" Max. Ht. | Saddle | Base | Mounting | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | tons | lbs. | tons | lbs. | Ht. | Max. Lift | Max. Wd. | Wd. | Lg. | Wd. | Lg. | Handle Lg. | Body Material | Fasteners Included | No. of Holes | Hole Dia. | Each | |
| 1/8 | 250 | 1/4 | 675 | 1 1/2 | 3,000 | 4"-13" | 9" | 10 1/2" | 2" | 5 1/8" | 4 1/4" | 7 3/8" | 22" | Steel | No | 2 | 3/8" | 0000000 | 000000 |
Bar-Adjustable Screw Jacks
The turning bar (sold separately) gives you leverage to lift heavier loads than wrench-adjustable screw jacks. The screw adjustment lets you make small changes to the height of your load. The saddle swivels to keep loads from slipping. The jack head has multiple openings so you can choose the best angle for inserting the turning bar.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Saddle | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | Dia. | Swivel Angle | Base Dia. | Body Material | Each | |
| 12 | 24,000 | 9 5/8"-13 3/8" | 3 3/4" | 2 7/8" | 9° | 4 3/4" | Iron | 0000000 | 0000000 |
| 12 | 24,000 | 11 5/8"-17 3/8" | 5 3/4" | 2 7/8" | 9° | 5 1/2" | Iron | 0000000 | 000000 |
| 12 | 24,000 | 15 3/4"-25 1/2" | 9 3/4" | 2 7/8" | 9° | 6 1/4" | Iron | 0000000 | 000000 |
| 20 | 40,000 | 11 7/8"-16 7/8" | 5" | 3 1/8" | 9° | 6" | Iron | 0000000 | 000000 |
| 20 | 40,000 | 13 3/4"-20 3/4" | 7" | 3 1/8" | 9° | 6 1/2" | Iron | 0000000 | 000000 |
| 20 | 40,000 | 15 3/4"-24 3/4" | 9" | 3 1/8" | 9° | 6 3/4" | Iron | 0000000 | 000000 |
| 24 | 48,000 | 17"-25 1/4" | 8 1/4" | 3 1/4" | 9° | 7 1/4" | Iron | 0000000 | 000000 |
| 24 | 48,000 | 23"-37 1/4" | 14 1/4" | 3 1/4" | 9° | 8 1/2" | Iron | 0000000 | 000000 |
Wrench-Adjustable Screw Jacks
Use these low-profile jacks in confined spaces. The screw adjustment lets you make small changes to the height of your load.
Jack with rigid saddle is also known as a spreader jack.
Jacks with swivel saddle keep loads from slipping. Also known as planer jacks, they have a side locking screw that keeps the jack extended and prevents lowering due to vibration.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Saddle | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | Dia. | Swivel Angle | Base Wd. | Body Material | Each | |
With Rigid Saddle | |||||||||
| 3 | 6,000 | 3"-4" | 1" | 1 1/2" | __ | 2" | Steel | 0000000 | 0000000 |
With Swivel Saddle | |||||||||
| 2 | 4,000 | 2 3/4"-3 3/4" | 1" | 1 1/4" | 25° | 2 3/8" | Iron | 000000 | 000000 |
| 4 | 8,000 | 3 3/4"-5 1/4" | 1 1/2" | 1 3/4" | 25° | 3 1/8" | Iron | 000000 | 000000 |
| 6 | 12,000 | 5 1/4"-7 1/2" | 2 1/4" | 2 1/8" | 25° | 4" | Iron | 000000 | 000000 |
| 8 | 16,000 | 7 1/2"-11 1/2" | 4" | 2 1/2" | 25° | 5 3/8" | Iron | 000000 | 000000 |
Ratchet Jacks
These jacks can be used to lift, spread, push, pull, and clamp. The ratcheting action raises or lowers the load one notch at a time. For clamping, turn the top plate 90° and ratchet the jack to secure your workpiece.
Note: Jacks must be loaded with at least 150 lbs. to safely lower your load one notch at a time. When loaded with less than 150 lbs., the notches are bypassed and the load will drop freely.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Toe | Base | Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max., tons | Range, lbs. | Max. Clamping Force, lbs. | Ht. | Max. Lift | Lg. | Wd. | Lg. | Wd. | Handle Lg. | Handle Material | Body Material | Fasteners Included | No. of Holes | Hole Dia. | Each | |
| 1 1/4 | 150-2,500 | 750 | 4 1/2"-49 3/4" | 45 1/4" | 4 1/2" | 1 3/8" | 7" | 4" | 32" | Steel | Iron | No | 12 | 1/2" | 000000 | 0000000 |
| 2 1/4 | 150-4,500 | 750 | 4 1/2"-38 5/8" | 34 1/8" | 4 1/2" | 1 3/8" | 7" | 4" | 32" | Steel | Iron | No | 12 | 1/2" | 000000 | 000000 |
Two-Height Ratchet Jacks
Choose between two lifting points—use the toe for lifting loads low to the ground, or use the saddle when you need a higher, more stable lifting point. The saddle is curved to cradle curved loads. Jacks have a ratcheting action that raises or lowers the load one notch at a time. A removable handle can be used at two different positions to get the best angle for lifting.
Aluminum jacks are lighter than iron for easier portability.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Toe | Saddle | Base | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Max. Lift | Ht. | Lg. | Wd. | Ht. | Movement | Wd. | Lg. | Wd. | Lg. | Handle Lg. | Handle Material | Each | |
Iron | |||||||||||||||
| 5 | 10,000 | 7" | 1.75"-8.75" | 2 1/2" | 1 1/8" | 14"-21" | Rigid | 2 3/8" | 2 5/8" | 7 3/8" | 5" | 36" | Steel | 000000 | 0000000 |
| 5 | 10,000 | 10" | 1.75"-11.75" | 2 1/2" | 1 1/8" | 17"-27" | Rigid | 2 3/8" | 2 5/8" | 7 3/8" | 5" | 36" | Steel | 000000 | 000000 |
| 5 | 10,000 | 13" | 1.75"-14.75" | 2 1/2" | 1 1/8" | 20"-33" | Rigid | 2 3/8" | 2 5/8" | 7 3/8" | 5" | 36" | Steel | 000000 | 00000000 |
| 10 | 20,000 | 9 1/2" | 1.625"-11.125" | 2 3/8" | 1 1/8" | 17.25"-26.75" | Rigid | 2 5/8" | 2 7/8" | 8 3/4" | 6" | 60" | Steel | 0000000 | 00000000 |
| 10 | 20,000 | 12" | 2"-14" | 2 3/8" | 2 1/2" | 21.625"-33.625" | Rigid | 2 1/2" | 3" | 10 1/4" | 6 1/2" | 60" | Steel | 000000 | 00000000 |
| 15 | 30,000 | 12 3/4" | 2.25"-15" | 2 5/8" | 2 1/4" | 23.25"-36" | Rigid | 2 7/8" | 3 1/2" | 10 1/4" | 8" | 70" | Steel | 0000000 | 00000000 |
| 15 | 30,000 | 18" | 2.25"-20.25" | 2 5/8" | 2 1/4" | 28"-46" | Rigid | 2 7/8" | 3 1/2" | 11" | 8" | 70" | Steel | 0000000 | 00000000 |
Aluminum | |||||||||||||||
| 10 | 20,000 | 12" | 2"-14" | 2 3/8" | 2 1/2" | 21.625"-33.625" | Rigid | 2 1/2" | 3" | 10 1/4" | 6 1/2" | 60" | Steel | 000000 | 00000000 |
Leveling Jacks
Mount these jacks to equipment to raise and level it.
Side Mount—Weld the included mount to equipment then attach the jack to the mount. A pin locks the jack in a vertical position; pull the pin to rotate the jack into a horizontal position when not in use.
Through-Hole Mount—Mount jacks through a hole in the frame of equipment and fasten the mounting plate.
Jacks with foot plate have extra stability.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | O'all Ht. | Handle Lg. | Body Material | For Hole Dia. | No. of Holes | Fasteners Included | Hole Dia. | Features | Each | ||
Through Hole Mount with Round Mounting Plate | ||||||||||||||
Top Handle | ||||||||||||||
| E | 2 1/2 | 5,000 | 4 1/2"-13 1/2" | 9" | 19 3/4" | 8 3/4" | Steel | 1 1/4" | 6 | No | 1/4" | Foot Plate, Slip-Resistant Rubber Pad | 000000 | 0000000 |
| E | 2 1/2 | 5,000 | 4 1/2"-21 1/2" | 17" | 27 3/4" | 8 7/8" | Steel | 1 1/4" | 6 | No | 1/4" | Foot Plate, Slip-Resistant Rubber Pad | 000000 | 000000 |
| E | 2 1/2 | 5,000 | 4 1/2"-25 1/2" | 21" | 31 3/4" | 8 3/4" | Steel | 1 1/4" | 6 | No | 1/4" | Foot Plate, Slip-Resistant Rubber Pad | 000000 | 000000 |
Air-Powered Hydraulic Lifting Jacks with Wheels
Roll this jack from job to job and under hard-to-reach places. It uses air pressure to raise loads with less effort than other jacks.
Note: Jacks should not be moved when under load.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Saddle | Base | Air Inlet | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | Type | Movement | Dia. | Lg. | Wd. | Ht. | Handle Lg. | Air Pressure, psi | Air Hose Lg., ft. | Hose Connection Type | Pipe Size  | Gender | Body Material | Wheel Material | Each | |
| 22 | 44,000 | 9 3/4"-19 1/4" | 9 1/2" | Flat | Rigid | 2" | 22 7/8" | 12 1/2" | 7" | 48 3/4" | 110-150 | 3 | Quick-Disconnect | 1/4 | Male | Steel | Plastic | 00000000 | 0000000 |
Air-Powered Hydraulic Bottle Jacks
These jacks use air pressure to raise loads with less effort than other bottle jacks. They can also be operated manually.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity | Base | Air Inlet | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Max. Lift | Ram OD | Lg. | Wd. | Handle Lg. | Air Pressure, psi | Air Hose Lg., ft. | Hose Connection Type | Pipe Size | Gender | Body Material | Features | Each | |
| 12 | 24,000 | 9 1/2"-18 1/2" | 9" | 1 3/4" | 7 7/8" | 6 1/4" | 24" | 110-175 | 4 | Quick-Disconnect | 1/4 | Male | Steel | Manual Override, Removable Handle | 00000000 | 0000000 |
| 20 | 40,000 | 9 3/4"-18 3/4" | 9" | 2 1/4" | 8 1/2" | 7 1/8" | 24" | 110-175 | 4 | Quick-Disconnect | 1/4 | Male | Steel | Manual Override, Removable Handle | 00000000 | 000000 |
| 30 | 60,000 | 11"-18 1/8" | 7 1/8" | 2 1/2" | 10 1/4" | 8 1/4" | 38 1/8" | 110-175 | 4 | Quick-Disconnect | 1/4 | Male | Steel | Manual Override, Removable Handle | 00000000 | 000000 |