Cover large sections of damaged concrete with these durable patching compounds. Made up of a resin, hardener, and aggregate, they cover more area than any of our other concrete patching compounds.

Not only do these leveling compounds withstand severe abrasion, wear, and impact, they also stand up to steel wheels and heavy blows without cracking.

Repair sidewalks and factory floors in areas with heavy pedestrian traffic. They can also be used to fill minor depressions and cracks.

Fill cracks up to 10" deep on vertical and overhead surfaces.

Pour these ready-to-use fillers in cracks up to ½" wide and ¼" deep on horizontal surfaces to make fast, light duty repairs.

Stop slow-flowing and weeping leaks in concrete. Also known as hydraulic cement, these crack fillers begin to harden in three to five minutes to create a permanent fix that won't shrink.

For use when thickness will be more than 2", concrete mixes consist of cement, sand, and gravel.

An easy way to make repairs in the field. Cut patches to size, peel off the backing, and press into place. Expose them to sunlight or a UV lamp and they begin to harden immediately.

With a durable one-piece construction, these boxes have no seams or welds to crack and leak.

Once concrete begins to set up and surface water reabsorbs, finish with a trowel to compact the top layer for a smooth, hard surface.

Create grooves in poured concrete slabs to control cracking caused by drying, settling, and freezing.

Drag these brooms along hardening concrete to create a rough surface for traction in slippery environments.

Stakes provide a firm anchor for concrete form boards.

Used on ceramic, concrete, and stone floor and wall tiles, grout consists of fine sand, masonry cement, and coloring.

Used for brick, block, and stone laying as well as for repairing masonry, mortar mixes consist of fine sand and masonry cement.

Press these putty-like fillers into cracks in wood up to 1/8" wide.

These surface fillers come in a pen for precision application. After applying, use the LED on the back of the pen to instantly cure.

Spread patching compounds in dry, wet, and even water-filled holes.

Use these solvent-free, high-gloss coatings to protect concrete floors in enclosed areas. Durable enough for forklift traffic, they resist stains, moisture, and chemicals.

Protect concrete from mild chemicals, salts, soaps, and detergents.

Commonly used by electronics manufacturers and research labs, apply these coatings to floors and walls to protect equipment from static electricity buildup.