Select these bumpers for applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Twist these bumpers into a threaded hole.

These bumpers withstand temperatures up to 300° F, which is twice as high as our other load rated bumpers. Use them in applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, these bumpers absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Twist them into a threaded hole.

All of these bumpers are reinforced with an embedded washer or base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. Install them with screws.

These nonslip bumpers protect equipment while minimizing the movement of objects that come in contact, making them good for positioning and robotic-gripping applications. Install them with adhesives or screws.

A ridge on the stem provides a tighter grip than other push-in bumpers. Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.

The stem on these bumpers compresses to fit into tight holes. Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.

Select these bumpers for applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Mount these bumpers on a threaded stud.

Press these bumpers into place with the adhesive backing. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. They're comparable to Bumpon bumpers.

Make bumpers the size and shape you need. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. Press them into place with the adhesive backing.

Install with a few taps of a hammer. In addition to protecting soft materials such as wood, fiberboard, and plastic, these bumpers are commonly used on table and chair legs to safeguard floors.

Use these feet on furniture with wood legs.

Cover the bottom of furniture legs.

Great for use outdoors, these feet are EPDM rubber, which withstands exposure to direct sunlight.

A swiveling base compensates for angled legs and uneven surfaces.

These feet are made of UHMW polyethylene plastic, so they won’t dry out and become brittle.

Peel back the film to stick these feet to the bottom of furniture and equipment legs.

Place these feet under furniture and equipment.

Gripping teeth on the bottom hold these mats in place on carpet.

These mats have a smooth bottom for use on hard floor surfaces.

Gripping teeth on the bottom hold these mats in place on carpet.

For use in food plants and other sanitary environments, these drainage mats are brightly marked at six-foot intervals to keep workers at a safe distance and help prevent the spread of illness.

With brightly colored markings spaced six feet apart, these drainage mats guide coworkers to stand at a safe distance from each other to help prevent the spread of illness. An open-grid design lets liquid pass through beneath your feet, so puddles don’t form to cause a slipping hazard.

These mats are designed to absorb shock from falling objects and protect floors as well as equipment. They stand up to prolonged loads and are often used to store heavy industrial parts.

Add permanent slip resistance to floors, ramps, stairs, and docks with these solid plates.

Often used in stairwells and hallways, these tiles have a raised-disc surface that provides traction and is easy to clean.

Curve these ramps to route cable around bends and corners in indoor areas with heavy pedestrian and equipment traffic.

Lay your cable in the slit on the top so it stays off the floor.

These cable ramps are strong enough to withstand equipment traffic.

With the widest channels of any of our cable ramps, these ramps can span large cable, hose, and pipe.

Cover floors with these temporary protectors. Adhesive on the back keeps them in place better than taped paper, and they can be left for up to 30 days.

Protect work areas and equipment from overhead leaks with these rot- and chemical-resistant tarps.

Keep covered items dry with these UV-resistant tarps.

Make sure covered objects get noticed. These tarps are bright yellow and orange with a contrasting border along each edge. They're UV, abrasion, and tear resistant.

Allow air to circulate to prevent condensation buildup with these tarps. They're double-stitched and have reinforced corners for durability.

These tarps resist flames, tears, and water.

Equally spaced D-rings along two center seams allow a tight hold.

A magnet sewn into each corner keeps these tarps in place on equipment.

Designed for marine environments, these coatings stand up to harsh chemicals, such as sulfuric acid, citric acid, and diesel fuel. They have excellent abrasion, impact, and UV resistance, as well as low hardening temperatures.

Protect concrete from mild chemicals, salts, soaps, and detergents.

These high-traction antislip coatings have zero VOCs and are low odor. They contain grit to provide traction to pedestrian, cart, and hand-truck traffic.

These provide the highest traction and impact resistance of our antislip coatings. Longer-lasting than antislip tape, these coatings contain grit to provide traction.

Also known as block filler, these primers fill cracks and smooth surface irregularities. Use them to prepare concrete floors to extend the life of paint and coatings.

Use these primers on your surface before antislip coatings to maximize longevity.

Pour these ready-to-use fillers in cracks up to ½" wide and ¼" deep on horizontal surfaces to make fast, light duty repairs.

Patch concrete floors, stairs, and walls with these compounds.

Use these two-part compounds to patch concrete floors, stairs, and walls in cold environments, such as freezers. At room temperature, they cure faster than any of our other concrete patching compounds.

Repair sidewalks and factory floors in areas with heavy pedestrian traffic. They can also be used to fill minor depressions and cracks.

Fill in and shape horizontal, vertical, and overhead concrete surfaces, such as steps and columns.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

These durable finishes are detergent resistant and dry to a clear, high-gloss shine.