Help prevent accidents in areas with slippery floors, tripping hazards, or low headroom. All signs meet OSHA 29 CFR 1910.145 safety color standards for indicating hazards. Caution headers indicate a potentially hazardous situation that, if not avoided, may result in minor or moderate injury.

For technical drawings and 3-D models, click on a part number.

These signs have the same message on each side. Place them where needed to clearly define and restrict access to dangerous areas, then fold them when not in use.

Signs with a Danger or Caution header meet OSHA safety color standards for indicating hazards. Danger headers are typically used in extreme conditions to indicate an imminently hazardous situation that, if not avoided, will result in death or serious injury. Caution headers indicate a potentially hazardous situation that, if not avoided, may result in minor or moderate injury.

These signs have the same message on all three sides. Place them where needed to clearly define and restrict access to areas of a facility, then collapse them when not in use.

Warning headers indicate a moderately hazardous situation that, if not avoided, may result in death or serious injury. They meet OSHA safety color standards for indicating hazards.

Attach these signs to the top of a traffic cone to define and restrict access to dangerous areas. They have a printed message on one side.

To limit the spread of illness by helping people social distance, these decals have brightly-colored symbols and text that make them easy to see and understand. Made of vinyl or polyester, they withstand heavy foot and vehicle traffic, cleanings, and chemical and water spills. They have an adhesive back that sticks flat to smooth floors, and a textured surface that helps prevent slipping. Some meet ANSI/ASSP and OSHA standards that ensure facility floors are kept clean, dry, and free of any tripping hazards.

Place metal-detectable decals in hygienic areas such as processing facilities for food, pharmaceuticals, or cosmetics. These decals contain a foil lining that will set off metal detectors if part of a decal falls into the product, helping you comply with Hazard Analysis and Critical Control Point (HACCP) programs. Stick them to rough or smooth surfaces.

Stand here decals show people how far away they should stand from each other while waiting in lines. Place them at 6-ft. intervals in high-traffic areas.

One way decals help foot traffic flow in one direction, which helps prevent people from coming within 6 ft. of one another. Stick them to rough or smooth surfaces.

The message on decals thicker than 0.012" won’t fade from exposure to UV light.

For spaces where you can’t mount to a wall, these signs stand on tables or floors to remind people to social distance or wear a mask, preventing the spread of illness. Fold flat to store. Made of plastic, they resist wearing, chipping, and cracking. They also won’t fade in the sun, so you can place them outside for short periods of time. Lightweight, they’re easy to move.

Set 3 1/2” tall signs on tables and desks in offices, warehouses, cafeterias, and other communal spaces.

Set 20” tall signs on floors in hallways, walkways, entrances, and areas with heavy foot traffic. Their message appears on their front and back, so people can read them from either direction. OSHA-compliant signs meet color standards for headers on safety signs.

These large decals have a pebbled nonskid surface and an adhesive backing that adheres to most surfaces.

For technical drawings and 3-D models, click on a part number.