Container Type Container Type |
---|
![]() | ![]() |
Pail | Cartridge |
![]() | ![]() |
Tube | Can |
![]() | |
Sausage Pack |
For Use On For Use On |
---|
For Joining For Joining |
---|
Formulation Formulation |
---|
|
Adhesive Type Adhesive Type |
---|
|
Container Size Container Size |
---|
|
|
Maximum Temperature Maximum Temperature |
---|
|
Minimum Temperature Minimum Temperature |
---|
|
Begins to Harden Begins to Harden |
---|
|
|
|
Shear Strength Shear Strength |
---|
|
Clarity Clarity |
---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
---|
Manufacturer Manufacturer |
---|
|
|
Hardness Rating Hardness Rating |
---|
|
|
Approximate Coverage Approximate Coverage |
---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
About Sealant Flexibility
More
About Structural Adhesives
More
Construction Adhesives for Flooring

Bond carpeting, vinyl tile, and other floor coverings to subfloors with these water-resistant adhesives.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Type | Approximate Coverage | Begins to Harden | Reaches Full Strength | Shear | Peel | Consistency | Temp. Range, °F | Color | For Use Outdoors | For Joining | Each | |
1 gal. | Pail | 33 sq. ft. @ 1/8" bead | 15 min. | 24 hrs. | Not Rated | Not Rated | Thick Liquid | 65° to 85° | Beige | No | Plastic, Wood | 00000000 | 000000 |
Construction Adhesives for Stair Treads

Install treads on concrete and wood stairs with this strong, water-resistant adhesive.
Container | Strength | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, gal. | Type | Approximate Coverage | Begins to Harden | Reaches Full Strength | Shear | Peel | Consistency | Temp. Range, °F | Color | For Use Outdoors | For Joining | Each | |
1 | Pail | 150 sq. ft. @ 1/16" bead | 15 min. | 24 hrs. | Not Rated | Not Rated | Paste | 55° to 85° | White | No | Masonry, Plastic, Rubber, Wood | 00000000 | 000000 |
Construction Adhesives for Decks and Subfloors

Use these water-resistant adhesives to bond lumber and plywood.
Container | Strength | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Approximate Coverage | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Consistency | Temp. Range, °F | Color | For Use Outdoors | For Joining | Each | |
Liquid Nails Adhesives | ||||||||||||||
LN-902 | 10 | Cartridge | 30 ft. @ 1/4" bead | 15 min. | 7 days | 500 | Not Rated | Paste | -20° to 140° | White | Yes | Wood | 0000000 | 00000 |
LNP-902 | 28 | Cartridge | 85 ft. @ 1/4" bead | 15 min. | 7 days | 500 | Not Rated | Paste | -20° to 140° | White | Yes | Wood | 0000000 | 0000 |
Construction Adhesives for Nosing

Bond and repair nosing and stair treads with this thick two-part epoxy. The size listed is the combined total of the two parts.
Container | Strength | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Approximate Coverage | Begins to Harden | Reaches Full Strength | Shear | Peel | Mix Ratio | Consistency | Temp. Range, °F | Color | For Use Outdoors | For Joining | Each | |
32 | Can | 75 ft. @ 1/4" bead | 45 min. | 24 hrs. | Not Rated | Not Rated | 1:1 | Paste | 70° to 80° | Beige | No | Masonry, Plastic, Rubber | 00000000 | 000000 |
Construction Adhesives



Install building materials such as wood and drywall with these general purpose adhesives. Use cartridges with a standard caulk gun.
Silicone adhesives resist a wider range of temperatures than latex adhesives.
Container | Strength | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size | Type | Approximate Coverage | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Consistency | Temp. Range, °F | Color | For Use Outdoors | For Joining | Each | |
Liquid Nails Latex Adhesives | ||||||||||||||
LNP-903 | 28 fl. oz. | Cartridge | 85 ft. @ 1/4" bead | 20 min. | 24 hrs. | 150 | Not Rated | Paste | 0° to 140° | Beige | Yes | Masonry, Wood | 0000000 | 00000 |
LNP-903 | 32 fl. oz. | Can | 100 ft. @ 1/4" bead | 20 min. | 24 hrs. | 150 | Not Rated | Paste | 0° to 140° | Beige | Yes | Masonry, Wood | 0000000 | 00000 |
LNP-903 | 1 gal. | Can | 400 ft. @ 1/4" bead | 20 min. | 24 hrs. | 150 | Not Rated | Paste | 0° to 140° | Beige | Yes | Masonry, Wood | 0000000 | 00000 |
Liquid Nails Silicone Rubber Adhesives | ||||||||||||||
LN-207 | 2.5 fl. oz. | Tube | 7 ft. @ 1/4" bead | 20 min. | 72 hrs. | 105 | 10 | Paste | -80° to 300° | Clear | Yes | Foam, Masonry, Plastic, Rubber | 0000000 | 0000 |
Construction Adhesives for Dissimilar Materials

Bond stone and glass to drywall, treated lumber, and subfloors with these adhesives.
Container | Strength | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Approximate Coverage | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in | Peel, lbs./in. wd. | Consistency | Temp. Range, °F | For Use Outdoors | For Joining | Color | Each | |
Liquid Nails Adhesives | ||||||||||||||
LN-950 | 10 | Cartridge | 30 ft. @ 1/4" bead | 30 min. | 48 hrs. | 250 | Not Rated | Paste | -40° to 300° | Yes | Ceramics, Composites, Foam, Glass, Masonry, Plastic, Rubber | Beige | 0000000 | 00000 |
Construction Adhesives for Interior Walls

Install foam insulation, drywall, and paneling with these water-resistant adhesives.
Container | Strength | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Approximate Coverage | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Consistency | Temp. Range, °F | Color | For Use Outdoors | For Joining | Each | |
Liquid Nails Adhesives | ||||||||||||||
LN-604 | 10 | Cartridge | 30 ft. @ 1/4" bead | 30 min. | 7 days | 400 | Not Rated | Paste | 20° to 120° | Off-White | Yes | Foam, Masonry, Wood | 0000000 | 00000 |
All-Weather Application Structural Sealants











Apply these sealants in cold temperatures, on wet surfaces, and even through running water. They are structural sealants that combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility. Sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are good for use between dissimilar materials and in environments with wide temperature fluctuation.
Container | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Temp. Range, °F | For Joining | Choose a Color | Each | |
Polyether | ||||||||||||
5 fl. oz. | Tube | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | White | 000000 | 00000 |
10.1 fl. oz. | Cartridge | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | 0000000 | 00000 | |
20 fl. oz. | Sausage Pack | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | 000000 | 00000 | |
28 fl. oz. | Cartridge | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | 000000 | 00000 | |
2 gal. | Pail | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | 000000 | 000000 | |
5 gal. | Pail | 20 min. | 7 days | 525% | -35% to 35% | 370 | Medium (Durometer 45A) | -40° to 200° | Metal Metal to Plastic Metal to Rubber Metal to Composites Metal to Glass Plastic Plastic to Rubber Plastic to Composites Plastic to Glass Rubber Rubber to Composites Rubber to Glass Asphalt Composites Composites to Glass Glass Masonry Wood Wood to Glass | 000000 | 000000 |
High-Strength Self-Leveling Concrete Joint Sealants

Seal concrete joints in high-traffic locations—these sealants stand up to heavy wear and tear, such as steel wheel traffic. Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Silicone sealant is RTV (room-temperature vulcanizing).
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation. For high-wear applications, choose a harder sealant for the most abrasion resistance.
When Sika Sikaflex Polyurethane requires a primer, for best results use Primer 260 on metal and Primer 449 on plastic and rubber.
Container | For Max. Crack | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Mix Ratio | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Wd. | Dp. | Temp. Range, °F | For Joining | Color | Each | |
Loctite® Polyurethane | |||||||||||||||
PC 6231 | 8.6 | Cartridge | 3 min. | 90 min. | 1:1 | 82% | -10% to 10% | Hard (Durometer 75A) | 3/4" | 2 1/4" | -40° to 120° | Metal, Plastic, Rubber, Asphalt, Composites, Glass, Masonry, Wood | Gray | 0000000 | 000000 |
Sika Sikaflex Polyurethane | |||||||||||||||
1C SL | 10.1 | Cartridge | 2 hrs. | 5 days | __ | 320% | -25% to 25% | Medium Soft (Durometer 35A) | 1/2" | 1/2" | -40° to 170° | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | Limestone | 0000000 | 00000 |
1C SL | 29 | Cartridge | 2 hrs. | 5 days | __ | 320% | -25% to 25% | Medium Soft (Durometer 35A) | 1/2" | 1/2" | -40° to 170° | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | Limestone | 0000000 | 00000 |
Silicone | |||||||||||||||
__ | 29 | Cartridge | 60 min. | 7 days | __ | 1,000% | -50% to 100% | Soft (Durometer 20A) | 1" | 1/2" | -60° to 300° | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | Limestone | 0000000 | 00000 |
High-Strength Concrete Joint Sealants


Seal concrete joints in high-traffic areas—these sealants stand up to heavy wear and tear, such as steel wheel traffic. They're non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone, sealants are RTV (room-temperature vulcanizing).
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Container | For Max. Crack | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Wd. | Dp. | Temp. Range, °F | For Joining | Color | Each | |
Sika Sikasil Silicone | ||||||||||||||
728 NS | 29 | Cartridge | 25 min. | 7 days | 1,000% | -50% to 100% | Soft (Durometer 10A) | 1" | 1/2" | -80° to 350° | Metal, Plastic, Rubber, Composites, Masonry, Wood | Limestone | 0000000 | 000000 |
Silicone | ||||||||||||||
__ | 20 | Sausage Pack | 60 min. | 7 days | 1,000% | -50% to 100% | Medium Hard (Durometer 55A) | 1" | 1/2" | -20° to 300° | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | Gray | 000000 | 00000 |
__ | 29 | Cartridge | 60 min. | 7 days | 1,000% | -50% to 100% | Medium Hard (Durometer 55A) | 1" | 1/2" | -20° to 300° | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | Gray | 000000 | 00000 |
Primer for Sika Sikasil Sealant (8-fl. oz. Bottle) | 0000000 | Each | 000000 |
Concrete Joint Sealants


Seal joints and gaps in concrete. These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.
Container | For Max. Crack | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Wd. | Dp. | Application Temp. Range, °F | Temp. Range, °F | For Joining | Color | Each | |
3M Polyurethane | |||||||||||||||
525 | 10.5 | Cartridge | 90 min. | 24 hrs. | 600% | Not Rated | Soft (Durometer 25A) | 1" | 1/2" | 40° to 95° | -20° to 175° | Metal, Plastic, Masonry, Wood | Gray | 0000000 | 000000 |
525 | 20.3 | Sausage Pack | 90 min. | 24 hrs. | 600% | Not Rated | Soft (Durometer 25A) | 1" | 1/2" | 40° to 95° | -20° to 175° | Metal, Plastic, Masonry, Wood | Gray | 0000000 | 00000 |
Textured Concrete Joint Sealants

The textured finish matches concrete surfaces. These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation. For high-wear applications, choose a harder sealant for the most abrasion resistance.
When Sika Sikaflex Polyurethane requires a primer, for best results use Primer 260 on metal and Primer 449 on plastic and rubber.
Primer 260 cannot be sold to CT, DC, DE, MA, MD, ME, NJ, NY, PA, RI, UT, VT; Northern VA; Los Angeles County, CA; Orange County, CA; Riverside County, CA; or San Bernardino County, CA, due to regulatory limits on VOCs (volatile organic compounds).
Container | For Max. Crack | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Mfr. Model No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Wd. | Dp. | Temp. Range, °F | For Joining | Choose a Color | Each | |
Sika Sikaflex Polyurethane | ||||||||||||||
Textured | 10.1 | Cartridge | 6 hrs. | 7 days | Not Rated | -25% to 25% | Soft (Durometer 30A) | 1/2" | 1/2" | -40° to 170° | Metal, Plastic, Rubber, Composites, Glass, Masonry | 000000 | 000000 | |
Polyurethane | ||||||||||||||
__ | 10.1 | Cartridge | 5 hrs. | 24 hrs. | 404% | -12.5% to 12.5% | Medium Soft (Durometer 37A) | 3/4" | 3/8" | -50° to 200° | Metal, Asphalt, Composites, Masonry | Gray | 000000 | 00000 |
Self-Leveling Concrete Joint Sealants

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Elongation indicates flexibility—the higher the value is, the more joint movement a sealant can sustain. For high-wear applications, choose a harder sealant for the most abrasion resistance.
Container | For Max. Crack | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Type | Begins to Harden | Reaches Full Strength | Mix Ratio | Elongation | Hardness | Wd. | Dp. | Application Temp. Range, °F | Temp. Range, °F | For Joining | Color | Each | |
Epoxy | ||||||||||||||
1 gal. | Can | 6 hrs. | 24 hrs. | 1:1 | Not Rated | Extra Hard (Durometer 60D) | 3/4" | 2" | 35° to 100° | -40° to 250° | Masonry | Gray | 0000000 | 0000000 |
1 gal. | Can | 6 hrs. | 24 hrs. | 1:1 | Not Rated | Extra Hard (Durometer 60D) | 3/4" | 2" | 50° to 100° | -40° to 250° | Masonry | Gray | 0000000 | 000000 |
2 gal. | Can | 6 hrs. | 24 hrs. | 1:1 | Not Rated | Extra Hard (Durometer 60D) | 3/4" | 2" | 35° to 100° | -40° to 250° | Masonry | Gray | 0000000 | 000000 |
2 gal. | Can | 6 hrs. | 24 hrs. | 1:1 | Not Rated | Extra Hard (Durometer 60D) | 3/4" | 2" | 50° to 100° | -40° to 250° | Masonry | Gray | 0000000 | 000000 |
All-Weather Application Concrete Joint Sealants

Apply these sealants on wet surfaces and in cold temperatures. They're non-sagging, so they won't drip from vertical and overhead surfaces.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. These sealants are best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.
Container | For Max. Crack | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Tensile Strength, psi | Hardness | Wd. | Dp. | Application Temp. Range, °F | Temp. Range, °F | For Joining | Choose a Color | Each | |
Polyether | |||||||||||||||
28 | Cartridge | 30 min. | 48 hrs. | 1,000% | -50% to 50% | 125 | Not Rated | 1" | 1" | 32° to 120° | -75° to 300° | Metal, Plastic, Rubber, Asphalt, Composites, Glass, Masonry, Wood | 00000000 | 000000 |
Self-Leveling All-Weather Application Concrete Joint Sealants

Apply these sealants on wet surfaces and in cold temperatures. Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.
Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain.
Container | For Max. Crack | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Hardness | Wd. | Dp. | Application Temp. Range, °F | Temp. Range, °F | For Joining | Choose a Color | Each | |
Hybrid Polymer | ||||||||||||||
9 | Cartridge | 90 min. | 24 hrs. | 900% | -25% to 25% | Soft (Durometer 25A) | 1/2" | 1/2" | 20° to 120° | -40° to 200° | Masonry, Wood | Gray | 0000000 | 000000 |
28 | Cartridge | 45 min. | 48 hrs. | 400% | Not Rated | Soft (Durometer 25A) | 1" | 1" | 35° to 120° | -75° to 300° | Metal, Plastic, Rubber, Asphalt, Composites, Masonry, Wood | 0000000 | 00000 |
High-Temperature Concrete Joint Sealants

Designed for use on ovens and kilns, these sealants form a durable, rock-hard seal after firing. They're non-sagging, so they won't drip from vertical and overhead surfaces.
Container | For Max. Crack | Each | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Heating Requirements to Reach Full Strength | Elongation | Joint Compression/ Expansion Tolerance | Wd. | Dp. | Application Temp. Range, °F | Temp. Range, °F | For Joining | Color | 1-11 | 12-Up | |
Silicate Cement | |||||||||||||||
10 | Cartridge | 10 sec. | 24 hrs. | 1 hr. @ 250° F then 2 hrs. @ 500° F | Not Rated | Not Rated | 1/8" | 1/8" | 40° to 100° | 0° to 2000° | Masonry | Black | 0000000 | 00000 | 00000 |
10.1 | Cartridge | 30 min. | 4 hrs. | 2 hrs. @ 175° F then 1 hr. @ 400° F | 0% | 0% | 1/2" | 1/2" | 40° to 90° | 35° to 1000° | Metal, Masonry | Black | 0000000 | 0000 | 0000 |
Epoxy Adhesives for Floor Tiles

Use this two-part, solvent-free epoxy to install floor tiles.
Container | ||||||||
---|---|---|---|---|---|---|---|---|
Size, gal. | Type | Approximate Coverage, sq. ft. | Mixing Required | Begins to Harden, min. | Reaches Full Strength, hrs. | For Use Outdoors | Each | |
1 | Can | 125-150 | Yes | 40 | 72 | No | 0000000 | 0000000 |