How to Identify and Measure Fittings
Pipe size is an industry designation, not the actual size. View information about how to measure threaded and unthreaded pipe and pipe fittings.
More
About Pressure-Relief Valves
More
Batch-Dispensing On/Off Valves
- For Use With: Beverage, Water, Kerosene, Bleach, Boric Acid, Deionized Water, Oil, Diesel Fuel, Food
Accurately and consistently dispense a specific amount of liquid—these actuated valves have a screen and buttons for programming batch size and calibration. They’ll automatically shut off once the set amount of liquid has been released. Their stainless steel body resists corrosion, so these valves can be used with harsh chemicals.
Overall | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size  | Gender | Thread Type | Flow Range, gpm | Pipe Schedule | Maximum Pressure | Maximum Temperature, °F | Maximum Current Draw, A | Valve Length | Width | Height | Environmental Rating | Specifications Met | Each | |
Stainless Steel Body with Fluoroelastomer Rubber Seals | ||||||||||||||
Normally Closed—120V AC | ||||||||||||||
| 1/2 | Female | NPT | 2 to 22 | 40 | 145 psi @ 175° F | 140° | 0.06 | 11 1/4" | 3 7/16" | 5 5/8" | IP65 | CSA Certified; UL Recognized Component | 0000000 | 000000000 |
| 3/4 | Female | NPT | 3 to 38 | 40 | 145 psi @ 175° F | 140° | 0.06 | 12 3/16" | 3 7/16" | 5 3/4" | IP65 | CSA Certified; UL Recognized Component | 0000000 | 00000000 |
| 1 | Female | NPT | 5 to 62 | 40 | 145 psi @ 175° F | 140° | 0.06 | 12 3/8" | 3 7/16" | 5 7/8" | IP65 | CSA Certified; UL Recognized Component | 0000000 | 00000000 |
Adjustable Pressure-Relief Valves for Chemicals
- For Use With: Aluminum Chloride, Boric Acid
- Temperature Range: 40° to 140° F
Often used with catalysts, pH buffers, and electroplating solutions, these valves have a PVC body and an EPDM seal for excellent chemical resistance. They begin opening at the set pressure and fully open at about 10% over the set pressure. Valves begin closing as pressure drops and fully close when the system pressure is restored below the set pressure. Adjust the set pressure within the range. Valves have a port for attaching a pressure gauge.
Inlet | Relief Port | Set Pressure | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Location | Maximum Pressure, psi | Pipe Size | Location | Range, psi | Adjustment Method | Overall Ht. | Gauge Port Pipe Size | Each | |
NPT Female Inlet and Relief Port | ||||||||||
Dark Gray PVC Body—EPDM Seal | ||||||||||
| 1/2 | Bottom | 150 | 1/2 | Side | 5 to 75 | External Adjustment Screw | 6 3/4" | 1/4 | 0000000 | 0000000 |
| 3/4 | Bottom | 150 | 3/4 | Side | 5 to 75 | External Adjustment Screw | 6 7/8" | 1/4 | 0000000 | 000000 |
| 1 | Bottom | 150 | 1 | Side | 5 to 75 | External Adjustment Screw | 8 3/4" | 1/4 | 0000000 | 00000000 |
| 1 1/2 | Bottom | 150 | 1 1/2 | Side | 5 to 75 | External Adjustment Screw | 13 1/4" | 1/4 | 0000000 | 00000000 |
| 2 | Bottom | 150 | 2 | Side | 5 to 75 | External Adjustment Screw | 15 1/2" | 1/4 | 0000000 | 00000000 |
International Standard ISO Minimal-Spill
Quick-Disconnect Hose Couplings for Chemicals
To minimize fluid loss when connecting and disconnecting your line, these couplings have flat faces for a close fit and shut-off valves to stop the flow—they meet ISO 16028, which is an international standard for hose couplings. They’re also known as flush-face and double shut-off couplings. A complete coupling consists of a plug and socket (both sold separately). They connect and disconnect quickly, so use them if you need to access a line frequently. Made of 316 stainless steel, they have excellent corrosion resistance and withstand a variety of chemicals.
Plugs are also known as nipples.
Sockets are push-to-connect style. To connect, push the plug into the socket until you hear a click. To disconnect, slide the sleeve on the socket forward until the plug ejects. These sockets have an internal fluoroelastomer gasket that resists a wide range of chemicals, including benzene, butyl alcohol, and ethylene glycol.
Note: To ensure a correct fit, make sure that the plug and socket have the same coupling size. Pressure ratings are given for static (constant) pressure conditions.
Warning: Never attempt to connect or disconnect couplings when operating at maximum pressure. Stop the flow before you disconnect the line.
- Maximum Pressure: 3,600 psi @ 72° F
- Temperature Range: 0° to 400° F
- Compatible With: ISO 16028 Parker FEM, ISO 16028 Perfecting HT, ISO 16028 Snap-Tite 74
- Specifications Met: ISO 16028
- Maximum Pressure: 3,600 psi @ 72° F
- Temperature Range: 0° to 400° F
- Compatible With: ISO 16028 Parker FEM, ISO 16028 Perfecting HT, ISO 16028 Snap-Tite 74
- Specifications Met: ISO 16028
- Maximum Pressure: 3,600 psi @ 72° F
- Temperature Range: 0° to 400° F
- Compatible With: ISO 16028 Parker FEM, ISO 16028 Perfecting HT, ISO 16028 Snap-Tite 74
- Specifications Met: ISO 16028
- Maximum Pressure: 3,600 psi @ 72° F
- Temperature Range: 0° to 400° F
- Compatible With: ISO 16028 Parker FEM, ISO 16028 Perfecting HT, ISO 16028 Snap-Tite 74
- Specifications Met: ISO 16028
Breakaway Hose Couplings for Chemicals and Petroleum
Minimize chemical and petroleum spills during accidental disconnects, such as a driver pulling away during loading. These couplings have a shut-off valve on each half to stop flow when they’re separated. Attach one end to your hose and the other to a supply pipe or a second hose.
Aluminum couplings are lightweight and have good corrosion resistance.
316 stainless steel couplings have excellent corrosion resistance.
2 NPT and 3 NPT couplings have bolts designed to break before your hose does. They can be repaired with replacement bolt kits and replacement seal kits (both sold separately).
- For Use With: See table
- Maximum Pressure: See table
- Temperature Range: See table
Pipe Size | ||||||||
|---|---|---|---|---|---|---|---|---|
| Plug | Socket | Max. Pressure | Temp. Range, °F | Repairable | For Use With | Each | ||
NPT Female Threaded Pipe | ||||||||
Aluminum Plug and Socket | ||||||||
| B | 2 | 2 | 230 psi @ 72° F | -50° to 200° | Repairable | Acetone, Benzene, Boric Acid, Butyl Alcohol, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Mineral Spirits, Varnish, Vegetable Oil | 0000000 | 0000000 |
| B | 3 | 3 | 230 psi @ 72° F | -50° to 200° | Repairable | Acetone, Benzene, Boric Acid, Butyl Alcohol, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Mineral Spirits, Varnish, Vegetable Oil | 0000000 | 00000000 |
316 Stainless Steel Plug and Socket | ||||||||
| B | 2 | 2 | 360 psi @ 72° F | -50° to 480° | Repairable | Acetone, Benzene, Boric Acid, Butyl Alcohol, Citric Acid, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Mineral Spirits, Nitric Acid, Sodium Hydroxide, Varnish, Vegetable Oil | 0000000 | 00000000 |
| B | 3 | 3 | 360 psi @ 72° F | -50° to 480° | Repairable | Acetone, Benzene, Boric Acid, Butyl Alcohol, Citric Acid, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Hydraulic Fluid, Isopropyl Alcohol, Mineral Oil, Mineral Spirits, Nitric Acid, Sodium Hydroxide, Varnish, Vegetable Oil | 0000000 | 00000000 |
Minimal-Spill Push-and-Turn Hose Couplings for Chemicals
Quickly connect and disconnect hose lines used with a variety of chemicals, from adhesives to isopropyl alcohol and ink. Any part of these couplings that contacts fluid is made from 316 stainless steel, C-276 Hastelloy, PTFE, or fluoroelastomer to withstand the chemicals in your line. Tough enough to handle frequent use, these couplings are designed to be virtually spill free. Also known as dry disconnects and double-shut off couplings, both the plug and the socket have a shut-off valve that stops the flow of liquids when they’re separated. To connect, push the plug into the socket and lock with a quarter turn. The socket swivels, so you won’t have to twist your hose to attach the plug. It also has a rubber lip and large handles to prevent damage if it’s dropped.
A complete coupling consists of a plug and a socket (both sold separately). They’re compatible with MannTek, Avery Hardoll, Todo-matic, and other dry-disconnect couplings that meet NATO standard STANAG 3756.
Aluminum couplings are lighter in weight than stainless steel and have good corrosion resistance.
316 stainless steel couplings have excellent corrosion resistance.
- For Use With:
Aluminum: Acetone, Adhesives, Benzene, Boric Acid, Butyl Alcohol, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Hydraulic Fluid, Ink, Isopropyl Alcohol, Mineral Oil, Mineral Spirits, Varnish, Vegetable Oil
316 Stainless Steel: Acetone, Adhesives, Benzene, Boric Acid, Butyl Alcohol, Citric Acid, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Hydraulic Fluid, Ink, Isopropyl Alcohol, Mineral Oil, Mineral Spirits, Nitric Acid, Sodium Hydroxide, Varnish, Vegetable Oil - Maximum Pressure:
Aluminum: 230 psi @ 72° F
316 Stainless Steel: 360 psi @ 72° F - Temperature Range: -15° to 400° F
- For Use With:
Aluminum: Acetone, Adhesives, Benzene, Boric Acid, Butyl Alcohol, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Hydraulic Fluid, Ink, Isopropyl Alcohol, Mineral Oil, Mineral Spirits, Varnish, Vegetable Oil
316 Stainless Steel: Acetone, Adhesives, Benzene, Boric Acid, Butyl Alcohol, Citric Acid, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Hydraulic Fluid, Ink, Isopropyl Alcohol, Mineral Oil, Mineral Spirits, Nitric Acid, Sodium Hydroxide, Varnish, Vegetable Oil - Maximum Pressure:
Aluminum: 230 psi @ 72° F
316 Stainless Steel: 360 psi @ 72° F - Temperature Range: -15° to 400° F
Bolt Hole | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Plug OD | Pipe Size | Flange OD | Flanged Connection Surface | Pressure Class | For Bolt Dia. | Dia. | No. of | Bolt Circle Dia. | Each | |
Aluminum | ||||||||||
| 2 3/4" | 2 | 6" | Flat | 150 | 5/8" | 3/4" | 4 | 4 3/4" | 0000000 | 0000000 |
| 4 11/16" | 3 | 7 1/2" | Flat | 150 | 5/8" | 3/4" | 4 | 6" | 0000000 | 000000 |
316 Stainless Steel | ||||||||||
| 2 3/4" | 2 | 6" | Raised | 150 | 5/8" | 3/4" | 4 | 4 3/4" | 0000000 | 000000 |
| 4 11/16" | 3 | 7 1/2" | Raised | 150 | 5/8" | 3/4" | 4 | 6" | 0000000 | 00000000 |
- For Use With:
Aluminum: Acetone, Adhesives, Benzene, Boric Acid, Butyl Alcohol, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Hydraulic Fluid, Ink, Isopropyl Alcohol, Mineral Oil, Mineral Spirits, Varnish, Vegetable Oil
316 Stainless Steel: Acetone, Adhesives, Benzene, Boric Acid, Butyl Alcohol, Citric Acid, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Hydraulic Fluid, Ink, Isopropyl Alcohol, Mineral Oil, Mineral Spirits, Nitric Acid, Sodium Hydroxide, Varnish, Vegetable Oil - Maximum Pressure:
Aluminum: 230 psi @ 72° F
316 Stainless Steel: 360 psi @ 72° F - Temperature Range: -15° to 400° F
- For Use With: Acetone, Adhesives, Benzene, Boric Acid, Butyl Alcohol, Citric Acid, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Hydraulic Fluid, Ink, Isopropyl Alcohol, Mineral Oil, Mineral Spirits, Nitric Acid, Sodium Hydroxide, Varnish, Vegetable Oil
- Maximum Pressure: 360 psi @ 72° F
- Temperature Range: -15° to 400° F