The indicator moves when flow is present, so it’s easy to visually confirm flow from a distance.

For visual confirmation of flow from a distance, these sights have a ball indicator that moves when flow is present.

Rated for more than double the pressure of standard flow sights, these can withstand pressures up to 400 psi.

A ball indicator increases the visibility of flow for checking at a distance.

To maintain a clear view of your process media without disrupting flow, twist the tubular window to clear debris and buildup with the internal wipers.

The included mounting ring lets you install these sights in instrument panels.

About half the height of other flow sights for chemicals, these fit in areas with limited clearance.

Measure the flow rate of water in your system.

For faster installation and disconnection than standard flowmeters for water, these flowmeters have union nuts on both ends.

Instead of a scale, these flowmeters have a prominent dial that’s easy to see from a distance. Dial displays readings in gallons.

Union nuts on both ends make it easy to install and remove these flowmeters from your system.

For easier reading from a distance, these flowmeters have a prominent dial instead of a scale. They can withstand pressures up to 3,000 psi.

The PVC body can withstand corrosive chlorinated and deionized water.

Use these flowmeters for highly accurate flow rate measurements.

A rugged, impact-resistant case protects these flowmeters from damage.

Install these flowmeters without disassembling your pipeline. Drill a hole in an existing run of PVC pipe and secure the flowmeter with the included clamps.

The prominent dial is easier to read from a distance than a standard scale.

Rated for at least six times the pressure of standard flowmeters for air, these can withstand pressures of at least 600 psi.

For installation in instrument panels, these flowmeters have fittings on the back.

Designed for more than 10 times the pressure of standard flowmeters for oil, these are rated for pressures up to 3,500 psi.

With double the temperature rating of standard flowmeters for oil, these can be used with oil up to 400° F.

Also called Doppler flowmeters, these use ultrasonic waves to spot check flow rate throughout your system. They are for water containing particles 100 microns (similar to flour) or larger.

Often used in heating, cooking, and power-generating systems.

Withstand temperatures of at least 194° F.

Three times more accurate than standard totalizers for water, these are rated for ±1.5% accuracy.

Flanged ends provide secure connections in large pipelines with high flow rates.

With a display that can be mounted up to 1,000 feet from the body, these totalizers are often installed in hard-to-access areas and remote locations.

Designed for use with light oils.

With a display that can be placed up to 25 feet from the sensor, these flowmeter/totalizers are often used in hard-to-access areas.

Determine the flow rate and total flow volume of water with the same meter.

For secure connections in large pipelines with high flow rates, these flowmeter/totalizers have flanged ends.