About Actuated On/Off Valves
More
About On/Off Valves
More
Compact Threaded On/Off Valves for Chemicals
For chemical-processing applications in confined areas, these valves have a low-profile handle to fit in tight spots. A rubber seal and a plastic body stand up to aggressive, corrosive solutions.
Polypropylene valves are the most chemical resistant. They handle a wide range of acids, solvents, and other harsh substances.
Full-port valves do not restrict flow. Standard-port valves slightly restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
- Valve Type: Ball
- For Use With: See table
- Seal Material: See table
| Pipe Size  | Flow Coefficient (Cv) | Port Type | Max. Pressure | Temperature Range, °F | Seal Material | End-to-End Lg. | For Use With | Each | |
NPT Female × NPT Female | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1/8 | 3.3 | Standard | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 1 7/8" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 00000000 | 000000 |
| 1/4 | 2.9 | Full | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 1 7/8" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 00000000 | 00000 |
| 1/4 | 7 | Full | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 2 1/2" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 00000000 | 0000 |
| 3/8 | 9.1 | Full | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 2 1/2" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 00000000 | 0000 |
| 1/2 | 8.1 | Standard | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 3 5/16" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 00000000 | 00000 |
| 1/2 | 10.3 | Full | 125 psi @ 140° F | -35° to 140° | EPDM Rubber | 2 3/4" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 000000000 | 00000 |
| 3/4 | Not Rated | Full | 125 psi @ 140° F | -35° to 140° | EPDM Rubber | 2 7/8" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 000000000 | 00000 |
| 3/4 | 16.5 | Standard | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 3 1/4" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Salt Water, Soap Solutions, Sodium Hydroxide, Water | 00000000 | 00000 |
NPT Female × NPT Male | |||||||||
| 1/8 | Not Rated | Standard | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 2 1/16" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 00000000 | 00000 |
| 1/4 | 2.6 | Full | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 2 3/16" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 00000000 | 00000 |
| 3/4 | 10.3 | Full | 125 psi @ 140° F | -35° to 140° | EPDM Rubber | 2 3/4" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 000000000 | 00000 |
| 3/4 | 16.3 | Standard | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 3 1/4" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Salt Water, Soap Solutions, Sodium Hydroxide, Water | 00000000 | 00000 |
NPT Male × NPT Female | |||||||||
| 1/4 | 1.9 | Full | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 3" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 00000000 | 0000 |
| 3/8 | 6.9 | Full | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 3" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 0000000 | 0000 |
| 1/2 | 6.9 | Standard | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 3 7/16" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 00000000 | 00000 |
| 1/2 | 9.5 | Full | 125 psi @ 140° F | -35° to 140° | EPDM Rubber | 2 5/8" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 000000000 | 00000 |
NPT Male × NPT Male | |||||||||
| 1/8 | 1.5 | Standard | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 2 5/16" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 00000000 | 00000 |
| 1/4 | 2.3 | Full | 125 psi @ 140° F | 35° to 140° | EPDM Rubber | 2 1/2" | Acetone, Air, Ammonia, Argon, Beverage, Citric Acid, Deionized Water, Ethanol, Ethylene Glycol, Food, Helium, Isopropyl Alcohol, Krypton, Methanol, Neon, Nitrogen, Phosphoric Acid, Soap Solutions, Sodium Hydroxide, Water, Xenon | 00000000 | 00000 |
Threaded Isolation On/Off Valves for Chemicals
- Valve Type: Ball
- For Use With: Acetone, Air, Ammonia, Argon, Carbon Dioxide, Deionized Water, Diesel Fuel, Ethanol, Fuel Oil, Gasoline, Helium, Isopropyl Alcohol, Kerosene, Krypton, Methanol, Neon, Xenon, Xylene
- Ball Material: 316 Stainless Steel
- Seal Material: PTFE Plastic
- Seat Material: PEEK Plastic
- Specifications Met: ASME B16.34
Attach gauges or sensors to these valves so you can remove them for maintenance and calibration without depressurizing your line. Also known as block and bleed valves, turn the handles to block both upstream and downstream flow, drain the liquid trapped in the valve through the bleed port, and then remove your instrument from the gauge port. Often used in chemical-processing lines, these valves have a PTFE seal and a corrosion-resistant 316 stainless steel body. All are standard port, so they slightly restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
Gauge Port | ||||||||
|---|---|---|---|---|---|---|---|---|
| Pipe Size | Pipe Size | Gender | Thread Type | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Each | |
316 Stainless Steel Body | ||||||||
NPT Female × NPT Female | ||||||||
| 1/2 | 1/4 | Female | NPT | 6.4 | 10000 psi @ 170° F | -65° to 450° | 0000000 | 0000000 |
Ultra-Chemical-Resistant Threaded On/Off Valves
The most chemical-resistant threaded valves we offer, these have a PTFE seal and an alloy body that can withstand extremely aggressive and corrosive chemicals, such as methyl ethyl ketone and toluene. They are standard port, so they slightly restrict flow.
Monel valves are more corrosion resistant than Alloy 20 valves.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
- Valve Type: Ball
- For Use With: Acetone, Air, Butane, Carbon Dioxide, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Kerosene, Methanol, Methyl Ethyl Ketone, Nitrogen, Propane, Soap Solutions, Sodium Hydroxide, Toluene, Water, Xylene
- Ball Material: Alloy 20 Stainless Steel
- Seal Material: PTFE Plastic
- Seat Material: PTFE Plastic
- Valve Type: Ball
- For Use With: Acetone, Air, Carbon Dioxide, Diesel Fuel, Gasoline, Kerosene, Methyl Ethyl Ketone, Nitrogen, Salt Water, Soap Solutions, Sodium Hydroxide, Toluene, Water, Xylene
- Ball Material: Monel
- Seal Material: PTFE Plastic
- Seat Material: PTFE Plastic
On/Off Valves with Yor-Lok Fittings for Chemicals
- Valve Type: Ball
- For Use With: Acetone, Air, Ammonia, Carbon Dioxide, Diesel Fuel, Gasoline, Kerosene
- Ball Material: Monel
- Seal Material: PTFE Plastic
- Seat Material: PTFE Plastic
- Specifications Met: ASME B16.34, ASME B31.3
For extra gripping power and a strong seal, the Yor-Lok fittings on these valves have two sleeves that bite into tubing as you tighten the nut. All are compatible with Swagelok®, Let-Lok, and Parker A-Lok fittings. These valves have a PTFE seal and a corrosion-resistant Monel ball and body that can stand up to aggressive and corrosive chemicals such as acetone. All are standard port, so they slightly restrict flow. A red handle makes them easy to identify.
For technical drawings and 3-D models, click on a part number.
Flanged Air-Driven On/Off Valves for Chemicals
- Valve Type: Ball
- For Use With: Water, Oil, Air, Natural Gas, Propane, Butane, Acetone, Argon, Carbon Dioxide, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Helium, Kerosene, Methanol, Methyl Ethyl Ketone, Mineral Spirits, Neon, Nitric Acid, Nitrogen, Oxygen, Salt Water, Soap Solutions, Steam, Xenon, Citric Acid, Krypton
- Ball Material: 316 Stainless Steel
- Seal Material : PTFE Plastic
- Seat Material: PTFE Plastic
- Actuator Housing Material: Aluminum
- Specifications Met: ASME B16.34
A 316 stainless steel body and a PTFE seal stand up to aggressive and corrosive solutions in chemical-processing applications. Their ball-valve design allows these valves to handle at least three times the flow of standard flanged valves. For faster actuation than motor-driven valves, they operate on compressed air. You must control the air to the actuator using either the included electric pilot valve or a manual on/off valve (not included). These valves automatically start and stop flow and don't require a minimum pressure drop between the inlet and outlet for operation.
Valves are full port, so they do not restrict flow. The actuator is secured to the valve body with a bracket for easy disassembly, maintenance, and repair. A visual flow indicator on the top of the actuator shows whether the valve is open or closed. The manual override allows you to operate the valve during power outages.
Single-acting actuators only require air pressure to open the valve; they automatically spring closed when the air turns off. These valves are normally closed unless actuated. Double-acting actuators require air pressure to open and close the valve. Once actuated, these valves remain actuated until air pressure is applied to close them, so they do not have a valve starting position.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
Bolts | Air | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Gender | Flange OD | No. of Holes | Hole Size | Included | Circle Dia. | Flow Coefficient (Cv) | Max. Pressure | Max. Steam Pressure | Pressure Drop | Temp. Range, °F | Valve Lg. | O'all Ht. | Connection | Pressure Range, psi | Each | |
316 Stainless Steel Body with Screw Terminals | |||||||||||||||||
Single Acting: Air-to-Open, Spring Return (Normally Closed)—120V AC | |||||||||||||||||
| 2 | Female | 6" | 4 | 0.551" | No | 4 3/4" | 307 | 275 psi @ 100° F | 100 psi @ 338° F | Zero Pressure Drop | 0° to 365° | 3 1/4" | 14" | 1/4 NPT Female | 40 to 115 | 0000000 | 000000000 |
| 3 | Female | 7 1/2" | 4 | 0.551" | No | 6" | 1,013 | 275 psi @ 100° F | 100 psi @ 338° F | Zero Pressure Drop | 0° to 365° | 4 13/16" | 18 5/16" | 1/4 NPT Female | 40 to 115 | 0000000 | 00000000 |
Double Acting: Air-to-Close, Air-to-Open—120V AC | |||||||||||||||||
| 2 | Female | 6" | 4 | 0.551" | No | 4 3/4" | 307 | 275 psi @ 100° F | 100 psi @ 338° F | Zero Pressure Drop | 0° to 365° | 3 1/4" | 13" | 1/4 NPT Female | 40 to 115 | 0000000 | 000000 |
| 3 | Female | 7 1/2" | 4 | 0.551" | No | 6" | 1,013 | 275 psi @ 100° F | 100 psi @ 338° F | Zero Pressure Drop | 0° to 365° | 4 13/16" | 15 1/4" | 1/4 NPT Female | 40 to 115 | 0000000 | 00000000 |
Flanged Motor-Driven On/Off Valves for Chemicals
- Valve Type: Ball
- For Use With: Water, Oil, Air, Natural Gas, Propane, Butane, Acetone, Argon, Carbon Dioxide, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Helium, Kerosene, Methanol, Methyl Ethyl Ketone, Mineral Spirits, Neon, Nitric Acid, Nitrogen, Oxygen, Salt Water, Soap Solutions, Steam, Xenon, Citric Acid, Krypton
- Ball Material: 316 Stainless Steel
- Seal Material: PTFE Plastic
- Seat Material: PTFE Plastic
- Actuator Housing Material: Aluminum
- Specifications Met: ASME B16.34
For high-flow chemical-processing applications, these valves have a ball-valve design that provides at least three times the flow of standard flanged valves. They have a 316 stainless steel body and a PTFE seal that can stand up to aggressive and corrosive solutions. Valves operate on electricity to automatically start and stop flow. They don’t require a minimum pressure drop between the inlet and outlet for operation. All are fail in place; upon the loss of power, the valve will remain in its current position. Valves are full port, so they do not restrict flow.
The actuator is secured to the valve body with a bracket for easy disassembly, maintenance, and repair. A visual flow indicator on the top of the actuator shows whether the valve is open or closed. Two single pole, double throw (SPDT) auxiliary switches allow you to connect these valves to temperature-monitoring equipment, programmable logic controllers, or conveyor sirens. The internal heater automatically turns on when the valve is actuated to prevent motor damage caused by condensation buildup. The manual override allows you to operate the valve during power outages.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
Bolts | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Gender | Flange OD | No. of Holes | Hole Size | Included | Circle Dia. | Flow Coefficient (Cv) | Max. Pressure | Max. Steam Pressure | Pressure Drop | Temp. Range, °F | Valve Lg. | O'all Ht. | Each | |
316 Stainless Steel Body with Screw Terminals | |||||||||||||||
Fail in Place—24V AC/24V DC | |||||||||||||||
| 2 | Female | 6" | 4 | 5/8" | No | 4 3/4" | 307 | 275 psi @ 100° F | 100 psi @ 338° F | Zero Pressure Drop | 0° to 365° | 3 1/4" | 19 1/16" | 0000000 | 000000000 |
| 3 | Female | 7 1/4" | 4 | 5/8" | No | 6" | 1,013 | 275 psi @ 100° F | 100 psi @ 338° F | Zero Pressure Drop | 0° to 365° | 4 13/16" | 22 5/8" | 0000000 | 00000000 |
Fail in Place—120V AC | |||||||||||||||
| 2 | Female | 6" | 4 | 5/8" | No | 4 3/4" | 307 | 275 psi @ 100° F | 100 psi @ 338° F | Zero Pressure Drop | 0° to 365° | 3 1/4" | 19 1/16" | 0000000 | 00000000 |
| 3 | Female | 7 1/4" | 4 | 5/8" | No | 6" | 1,013 | 275 psi @ 100° F | 100 psi @ 338° F | Zero Pressure Drop | 0° to 365° | 4 13/16" | 22 5/8" | 0000000 | 00000000 |
On/Off Valve Bodies
Automatically or manually start and stop flow in your line with these valve bodies, which attach to your actuator. They have a full port, so they don’t restrict flow. All meet standard ISO 5211 mounting dimensions. Use valve stem adapters to mount to valve actuators with a larger stem opening.
316 stainless steel valve bodies have excellent corrosion resistance.
Three-piece valve bodies are easy to maintain because you can take them apart without removing them from your line.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
Overall | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Max Steam Pressure | Pressure Drop | Temp Range, °F | Actuator Mounting Pattern | Stem Size, mm | Lg. | Wd. | Ht. | Port Type | Max. Torque, in.-lbs. | For Valve Manufacturer Model Number | Each | |
316 Stainless Steel Body—Three Piece Construction | |||||||||||||||
NPT Female | |||||||||||||||
| 1/2 | 15 | 1500 psi @ 100 ° F | 150 psi @ 212 ° F | Pressure Drop Assisted | -20° to 450° | F03, F04 | 9 | 2 5/8" | 1 13/16" | 1 15/16" | Full | 50 | AS7002MC, AS7012MC | 00000000 | 000000 |
| 3/4 | 35 | 1500 psi @ 100 ° F | 150 psi @ 212 ° F | Pressure Drop Assisted | -20° to 450° | F03, F04 | 9 | 3" | 1" | 2 3/16" | Full | 70 | AS7003MC, AS7013MC | 000000 | 00000 |
| 1 | 60 | 1500 psi @ 100 ° F | 150 psi @ 212 ° F | Pressure Drop Assisted | -20° to 450° | F04, F05 | 11 | 3 3/8" | 2 3/16" | 2 11/16" | Full | 100 | AS7004MC, AS7014MC | 000000 | 000000 |
| 1 1/2 | 138 | 1250 psi @ 100 ° F | 150 psi @ 212 ° F | Pressure Drop Assisted | -20° to 450° | F05, F07 | 14 | 4 11/16" | 3 3/32" | 3 7/8" | Full | 390 | AS7006MC, AS7016MC | 000000 | 000000 |
| 2 | 270 | 1000 psi @ 100 ° F | 150 psi @ 212 ° F | Pressure Drop Assisted | -20° to 450° | F05, F07 | 14 | 5 1/8" | 3 3/4" | 4 1/8" | Full | 480 | AS7007MC, AS7017MC | 000000 | 000000 |