Extend your reach in hard-to-access areas—turn these valves on and off using a square ratchet to grasp the hole at the end of the handle. They are full port, so they do not restrict flow.

316 stainless steel valves are more corrosion resistant than bronze valves.

Fix lockable lever handles in place using a padlock (not included).

Valves with a grease fitting have a built-in lubrication point. Inject lubricant for smooth operation and an extended service life. You can also remove the fitting to drain excess fluid from your valve.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.

Maintain and repair these valves without unthreading pipe connections. They have a three-piece bolted body that disassembles inline for access to internal components. All are full port, so they do not restrict flow.

316 stainless steel valves are more corrosion resistant than bronze or steel valves.

Lockable lever handles can be fixed in place using a padlock (not included).

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.

These valves are rated for at least three times the pressure of standard threaded valves.

316 stainless steel valves are more corrosion resistant than steel valves.

Lockable lever handles can be fixed in place using a padlock (not included).

Standard-port valves slightly restrict flow.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.

T-handles resist accidental movement when snagged or bumped.

Full-port valves do not restrict flow.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.

A threaded union on these valves makes them easy to install and remove without disrupting your line. They’re a good choice for lines that require frequent maintenance or cleaning. They thread together or apart with only a turn to the union fitting, unlike other threaded on/off valves that require repositioning your pipe or valve. The union fitting slides over your pipe, and the threaded fitting sits inside. With a full port, these valves won’t restrict flow.

Made of plastic, they last longer than metal valves since the inside won’t corrode or pit. They’re also lighter in weight. PVC valves are commonly used in water lines. CPVC valves handle higher temperatures than PVC or polypropylene valves. They’re the best choice if your system connects to a heater.

Valves with a T-handle have a larger gripping surface than valves with a short lever handle, so they’re easier to turn when your hands are slippery.

For technical drawings and 3-D models, click on a part number.

Bolt these valves to ANSI flanges. Their lockable lever handle can be fixed in place using a padlock (not included). All have four mounting holes to install an actuator, so you can convert them from manual to automatic valves.

Steel valves stand up to corrosion better than cast iron valves. 316 stainless steel valves are more corrosion resistant than cast iron and steel valves.

Full-port valves do not restrict flow.Pressure class 150 valves are standard and work for most low-pressure applications.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.

Also known as wafer ball valves, these combine the slim body of a butterfly valve with the high flow rates of a flanged ball valve. Bolt these valves to ANSI flanges—they meet ASME standards for dimensions, material, and pressure-temperature rating. They are full port, so they do not restrict flow.

316 stainless steel valves are more corrosion resistant than steel valves.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.

Clean and maintain these valves without removing welded connections. To create a permanent, leak-tight connection, insert unthreaded pipe into the socket and weld. These valves have a three-piece bolted body that disassembles inline, which makes it easy to access internal components. They also have lockable handles that can be fixed in place with a padlock (not included). All are full port, so they do not restrict flow.

316 stainless steel valves resist corrosion better than steel valves.

Lever handles make it easy to see if the valve is open or closed.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

Maintenance kits (sold separately) include seats, seals, and stem packing to replace worn parts inside valves.

For technical drawings and 3-D models, click on a part number.

Streamline your installation and removal process. These valves give you the leak-tight permanent connection of a socket connect with the ease of fittings that come apart. Before you install the valve, slide the union fitting over your pipe, then insert the pipe into the socket fittings and bond with primer and cement. The union fittings allow the valve to be quickly removed where other socket-connect valves would require you to cut your pipe. A fluoroelastomer seal and plastic body withstand aggressive and corrosive solutions in chemical-processing applications. All valves have a T-handle that resists accidental movement when snagged or bumped. They are full port, so they do not restrict flow.

PVC valves are often used in mild chemical processing systems. CPVC valves resist heat better than PVC valves, so they’re a good choice for systems that connect to a heater. Lockable T-handles can be fixed in place using a padlock (not included).

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.

Insert unthreaded pipe into the socket ends and bond with primer and cement to create a permanent, leak-tight connection. These valves meet NSF/ANSI 61, which means they’re safe to use with drinking water systems. They are full port, so they do not restrict flow.

PVC valves are made of the standard material used in most drinking water systems. CPVC valves resist heat better than PVC valves, so they’re better for water systems connected to a heater.

T-handles resist accidental movement when snagged or bumped.

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.

Ideal for lines that need frequent maintenance, these valves have union fittings that disassemble quickly for removal. To install, slide the union fitting over unthreaded pipe. Insert the pipe into the socket fitting and bond with primer and cement (both not included) to create a permanent, leak-tight connection. When you need to remove the valve, just unthread the union fitting. These valves meet NSF/ANSI 61 for use with drinking water. All have a T-handle that resists accidental movement when snagged or bumped. They are full port, so they do not restrict flow.

PVC valves are made of the standard material used in most drinking water systems. CPVC valves resist heat better than PVC valves. They’re the best choice if your system connects to a heater.

Fix lockable T-handles in place using a padlock (not included).

Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.

For technical drawings and 3-D models, click on a part number.