For installation in instrument panels, these flowmeters have fittings on the back.

The prominent dial is easier to read from a distance than a standard scale.

Rated for at least six times the pressure of standard flowmeters for air, these can withstand pressures of at least 600 psi.

Measure the flow rate of water in your system.

Instead of a scale, these flowmeters have a prominent dial that’s easy to see from a distance. Dial displays readings in gallons.

Measure the flow rate of water in both gallons and liters.

For easier reading from a distance, these flowmeters have a prominent dial instead of a scale. They can withstand pressures up to 3,000 psi.

Union nuts on both ends make it easy to install and remove these flowmeters from your system.

A 304 stainless steel case protects these flowmeters from blows that could shatter the glass body.

A rugged, impact-resistant case protects these flowmeters from damage.

Fittings on the back let you install these flowmeters in instrument panels.

Install these flowmeters without disassembling your pipeline. Drill a hole in an existing run of PVC pipe and secure the flowmeter with the included clamps.

Measure the flow rate of hydraulic and motor oil.

The correlated scale and conversion charts let you use the same flowmeter for nitrogen, oxygen, argon, and helium.

Directly install these flowmeters in your pipeline. They can be used with water containing particles up to 1/8” in diameter.

To protect against dust, washdowns, and corrosion, these flowmeter/totalizers have an enclosure that meets NEMA 4X.

Bond the unthreaded connections to PVC pipe with PVC cement and primer.

To withstand water and a variety of caustic chemicals, these flowmeter/totalizers have a corrosion-resistant 316 stainless steel body.

These totalizers meet NSF/ANSI Standard 61 for use in drinking water systems.

Flanged ends provide secure connections in large pipelines with high flow rates.

More than twice as accurate as standard totalizers for fuel, these are rated for ±2% accuracy.

Three times more accurate than standard totalizers for water, these are rated for ±1.5% accuracy.

Withstand temperatures of at least 194° F.

Often used in heating, cooking, and power-generating systems.

Often used in cooling, lubrication, and process systems.

Barbed fittings slide into soft plastic and rubber tubing.

Withstand twice the temperature of standard sights. These are rated for temperatures up to 400° F.

Rated for more than double the pressure of standard flow sights, these can withstand pressures up to 400 psi.

A large tubular window provides an unobstructed view of liquid color, clarity, and movement from multiple angles.

Made of FDA-listed materials, these sights can be used with food and beverage. They have sanitary quick-clamp connections for easy disassembly and cleaning.

About half the height of other flow sights for chemicals, these fit in areas with limited clearance.

These switches have a fixed set point for applications with consistent flow.

An adjustment screw lets you alter the set point to suit your application.

Designed for applications with consistent flow, these switches have a fixed set point.

For flow monitoring at a glance, these switches have a plastic window with a rotor that spins when flow is present.

At half the height of standard insertion flow switches, these are often used in low-clearance areas.

Commonly used in TIG welding where gas flow/coverage is a concern.