Use these components to create an air-powered dispensing system. A foot pedal controls the amount released.

A curved plastic tip fits into bearing seals, narrow holes in housings, and around small parts in 3D printers and other machinery. Use these syringes to control the direction of flow so you don't make a mess.

Designed for dispensing tiny quantities, these glass syringes are often used in gas chromatography applications. Attach a needle with a luer lock connection to dispense contents.

Cover syringe tips when not in use to protect them and prevent leaks.

These flexible needles can be cut to length.

The nonstick surface is good for liquids that tend to clog, such as instant-bonding adhesives.

The needles in these sets connect to adhesive cartridges, grease guns, and other dispensers with threaded connections.

These fixed-volume micropipettes dispense a small amount of liquid for speedy, routine dispensing jobs.

Transfer measured streams of liquid.

Also known as basters, these dispensers transfer larger amounts of liquid than bulb droppers. Liquids are dispensed in a stream, rather than drop by drop.

Cover the top opening with your thumb to control the flow of liquid one drop at a time.

Long nozzles allow dispensing in hard-to-reach places.

Also known as wash bottles, these dispense liquid at a downward angle.

These bottles are made with an additive that prevents electrostatic discharge from building up on the surface.

Made of FEP plastic, these are our most chemical-resistant squeeze bottles. They are also autoclavable.

Add a needle with a luer lock connection and squeeze to dispense a single drop or a stream of liquid.

Squeeze out liquids one drop at a time.

Fill air-atomizing sprayers with these pitchers. The nozzle is designed to fit into the sprayer opening and has a removable brass filter to strain out foreign particles.

A rechargeable battery keeps these sprayers pressurized, so you don’t have to stop to pump while spraying herbicides, insecticides, disinfectants, cleaners, and other solutions.

Carry these sprayers comfortably on your back using the padded shoulder straps.

An electrostatic charging ring in these backpack sprayers gives spraying liquids a positive charge, so that disinfectant or insecticide will cling to surfaces for an even coating.

Fill the reservoir, attach the propellant cartridge, and spray.

To save time and effort when disinfecting bathrooms, worksites, and other large spaces, these sprayers are electric powered, so you don’t need to pump them by hand.

Access tight spaces with the 36" long tube that extends from these spray bottles.

Dispense up to three times more liquid per stroke than other spray bottles.

Identify contents quickly with labels written in English and Spanish.

Spray liquids with these fillable bottles—the head twists on and off to make filling easy.

Spray at any angle—even upside down.

Dispense flammable liquids with these FM-approved push-top dispensers.

An additive prevents electrostatic discharge from building up on the surface of these dispensers.

Often used in laboratories, these dispensers fit on most lab bottles. Push down on the top to dispense precise amounts of acids, solvents, and other liquids.

Dispense precise amounts of fluid from a syringe. Commonly used in chemical and pharmaceutical research, fiber production, and equipment calibration, these pumps maintain a steady flow rate for accurate filling and measuring.

Install these pumps in a panel cutout. Often used in food and beverage, pharmaceutical, and lab applications, they dispense small amounts of liquid at a set rate.

With a footprint that's only a few inches in any direction, these pumps fit into compact systems to dispense small amounts of acids, cleaning fluids, and other chemicals. They're often used in sterilization, photochemical, and water treatment systems.

Commonly used in mining, wastewater treatment, and other systems that require large-diameter hose, these pumps have flanged hose connections and large diameter tubing.

These pumps meter a consistent amount of liquid within ±2% of the maximum flow.

These pumps can be used with pressures four times higher than standard pumps for chemicals.

A 316 stainless steel housing provides corrosion resistance for a long life in harsh environments. These pumps meter a consistent amount of liquid within ±2% of the maximum flow.

Rotate the handle to dispense a continuous flow of liquid.

Designed to move low volumes of caustic liquids in confined areas, these pumps have a thin intake tube and a small handle.

Eliminate leaks and waste with a faucet-style nondrip nozzle that quickly starts and stops flow.

A 316 stainless steel housing makes these pumps resistant to coolants such as ethylene glycol.

For low-effort dispensing, these pumps have a lever handle that maximizes output with each stroke. Use them to pump lubricating oil, such as motor oil.

Use these pumps in food and beverage applications.

Eliminate leaks and waste with a faucet-style nondrip nozzle that quickly starts and stops flow.

A nozzle and hose allow you to dispense directly into your container. The lever handle maximizes output with each stroke for low-effort dispensing. The handle delivers fluid on both the forward and backward strokes to quickly move drum contents.

These pumps have a discharge hose for transfer applications and a vacuum breaker that drains the hose to prevent siphoning. A lever handle delivers fluid on both the forward and backward strokes for faster dispensing than other drum pumps.

Rotate the handle to dispense a continuous flow of liquid.

A lever handle delivers fluid on both the forward and backward strokes for faster dispensing than other drum pumps.

Often used with ammonia, etching and cleaning solutions, and other caustics, these pumps have a nonsparking air-powered motor for applications where electricity is unavailable or dangerous.

These pumps have a motor that is rated for IEC Zone 1, Groups IIB and IIA; and IEC Zone 21, Groups IIIC, IIIB, and IIIA hazardous locations with flammable gases and vapors, so they can be used with liquids such as acetone, ethanol, methyl ethyl ketone, xylene, and mineral spirits.

For easy cleaning, these pumps have a sanitary quick-clamp discharge connection. They're made of FDA listed materials for use with food, water, and beverage.

Since these pumps move liquid by pressurizing your drum, they have few moving parts prone to wear and tear.

A chemical- and impact-resistant PVDF housing stands up to aggressive chemicals such as methyl ethyl ketone and xylene.

Designed to move 40 gallons of liquid per minute, these pumps quickly empty drum contents.

For accurate dispensing in extremely low-flow applications, these pumps allow you to adjust flow in 2% increments.

These pumps quickly empty drum contents by moving 48 gallons of liquid per minute. Their electric motors are UL listed for use in environments with flammable gases and combustible dust.

Commonly used in food, beverage, pharmaceutical, and cosmetic processing, these pumps are designed for sanitary environments.

Made of PVDF components, these pumps resist harsh chemicals such as hydrochloric acid and sulfuric acid. They have a foot pedal for hands-free operation.

These pumps are C-UL listed for use in environments with flammable gases and combustible dust. Operating on a 12-volt battery, use them to transfer and drain fuel such as gasoline, diesel fuel, and kerosene.

A nozzle and hose allow you to dispense directly into your container. For on-site diesel fuel dispensing at construction sites, on boats, and in other environments without electrical hookups, attach these portable pumps to any 12-volt battery.

Quickly generate suction with battery power.

Convenient to keep in your toolkit for on-site cleanup, these pumps attach to your drill for small liquid extraction jobs as well as draining water from clogged sinks and emptying tanks.

Match your pump’s manufacturer and model number to choose the right replacement impeller.

Drain underground tanks and process wastewater with pumps that can be installed up to 20 ft. above your liquid source.

A powerful motor provides twice the flow rate of other self-priming circulation pumps. It is totally enclosed fan-cooled (TEFC) for use in dusty, dirty, and damp environments. Install these pumps up to 20 ft. above your liquid source to drain underground tanks and process wastewater.

Move water and coolants, such as ethylene glycol, in boiler feed systems, cooling towers, and heat exchangers.

Also known as turbine pumps, these have a specialized impeller that propels water about four times higher and farther than standard circulation pumps. They're commonly used with chillers, heat exchangers, and boiler feed systems.

With all PTFE wetted parts, these pumps offer the best chemical resistance of all our air-powered transfer pumps and can handle solvents and petroleum-based fluids that PVDF pumps can’t.

These pumps have a chemical-resistant polypropylene housing for use in harsh environments.

These pumps have a PTFE diaphragm compatible with oil, fuel, and chemicals such as mineral spirits, methyl ethyl ketone (MEK), and xylene. They have a rugged aluminum housing for moving large volumes of thick sludges and slurries in demanding environments.

With a 316 stainless steel housing and a PTFE diaphragm, these pumps resist a variety of acids, alkalies, and flammable liquids such as phosphoric acid, acetone, and methyl ethyl ketone (MEK). They're designed for moving large volumes of thick sludges and slurries in demanding environments.

A neoprene diaphragm stands up to oil and chemicals such as isopropyl alcohol and deionized water. These pumps have large internal pathways and check valves with flaps to accommodate thick sewage, abrasive slurries, and industrial waste with large solids that would damage standard air-powered transfer pumps.