Material Material |
|---|
|
|
Capacity Capacity |
|---|
|
Pin Type Pin Type |
|---|
 |  |
| Nonremovable | Removable |
 | |
| Lift Off |
Door Mounting Location Door Mounting Location |
|---|
|
Opening/Closing Action Opening/Closing Action |
|---|
|
Mounting Hole Style Mounting Hole Style |
|---|
|
Pin Material Pin Material |
|---|
|
Leaf Thickness Leaf Thickness |
|---|
|
Door Leaf Width Door Leaf Width |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
About Hinges
More
Mortise-Mount Concealed Cabinet Hinges
Hinge leaves fit into two cutouts (mortises) to mount flush with door and frame edges. Mount these hinges to the inside of cabinets and they will be completely hidden from the outside when the door is closed. They are commonly found on washroom and kitchen cabinetry. All of these hinges have a nonremovable pin to deter tampering. Use them on inset doors that are flush with their frame when the door is closed.
Chrome- and brass-plated zinc hinges are more corrosion resistant than painted zinc.
Router guide (sold separately) is a template for making cutouts.
For technical drawings and 3-D models, click on a part number.
Hinges | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Door Leaf | Frame Leaf | Router Guides | ||||||||||||||
| For Min. Door Thick. | For Cutout Dp. | Ht. | Wd. | Ht. | Wd. | Leaf Thick. | Range of Motion | Capacity, lbs. | Pin Material | Mounting Fasteners Included | No. of Mounting Holes | Mounting Hole Style | Each | Each | ||
For Inset Door—Standard | ||||||||||||||||
Chrome-Plated Zinc—Dull | ||||||||||||||||
| 1/2" | 7/16" | 1" | 3/8" | 1" | 3/8" | 0.234" | 180° | 12 | Steel | Yes | 4 | Straight | 0000000 | 000000 | 000000 | 00 |
| 1/2" | 7/16" | 1 11/16" | 3/8" | 1 11/16" | 3/8" | 0.219" | 180° | 25 | Steel | Yes | 4 | Straight | 0000000 | 00000 | 00000000 | 000000 |
| 11/16" | 5/8" | 1 1/2" | 1/2" | 1 1/2" | 1/2" | 0.063" | 180° | 20 | Steel | Yes | 4 | Straight | 0000000 | 00000 | 000000 | 00 |
| 3/4" | 9/16" | 1 1/2" | 1/2" | 1 1/2" | 1/2" | 0.219" | 180° | 20 | Steel | Yes | 4 | Straight | 0000000 | 00000 | 00000000 | 00000 |
| 3/4" | 11/16" | 1 3/4" | 1/2" | 1 3/4" | 1/2" | 0.188" | 180° | 25 | Steel | Yes | 4 | Straight | 0000000 | 00000 | 00000000 | 00000 |
| 3/4" | 11/16" | 2 3/8" | 1/2" | 2 3/8" | 1/2" | 0.250" | 180° | 32 | Steel | Yes | 4 | Straight | 0000000 | 00000 | 00000000 | 00000 |
| 1" | 7/8" | 2 3/4" | 5/8" | 2 3/4" | 5/8" | 0.281" | 180° | 40 | Steel | Yes | 4 | Straight | 0000000 | 00000 | 00000000 | 00000 |
| 1 1/8" | 1 1/16" | 3 3/4" | 3/4" | 3 3/4" | 3/4" | 0.375" | 180° | 70 | Steel | Yes | 4 | Straight | 0000000 | 00000 | 00000000 | 00000 |
Brass-Plated Zinc—Dull | ||||||||||||||||
| 1/2" | 7/16" | 1" | 3/8" | 1" | 3/8" | 0.234" | 180° | 12 | Steel | Yes | 4 | Straight | 000000 | 00000 | 000000 | 00 |
| 1/2" | 7/16" | 1 11/16" | 3/8" | 1 11/16" | 3/8" | 0.219" | 180° | 25 | Steel | Yes | 4 | Straight | 000000 | 00000 | 00000000 | 00000 |
| 11/16" | 5/8" | 1 1/2" | 1/2" | 1 1/2" | 1/2" | 0.063" | 180° | 20 | Steel | Yes | 4 | Straight | 000000 | 00000 | 000000 | 00 |
| 3/4" | 9/16" | 1 1/2" | 1/2" | 1 1/2" | 1/2" | 0.219" | 180° | 20 | Steel | Yes | 4 | Straight | 000000 | 00000 | 00000000 | 00000 |
| 3/4" | 11/16" | 1 3/4" | 1/2" | 1 3/4" | 1/2" | 0.188" | 180° | 25 | Steel | Yes | 4 | Straight | 000000 | 00000 | 00000000 | 00000 |
| 3/4" | 11/16" | 2 3/8" | 1/2" | 2 3/8" | 1/2" | 0.250" | 180° | 32 | Steel | Yes | 4 | Straight | 000000 | 00000 | 00000000 | 00000 |
| 1" | 7/8" | 2 3/4" | 5/8" | 2 3/4" | 5/8" | 0.281" | 180° | 40 | Steel | Yes | 4 | Straight | 000000 | 00000 | 00000000 | 00000 |
| 1 1/8" | 1 1/16" | 3 3/4" | 3/4" | 3 3/4" | 3/4" | 0.375" | 180° | 70 | Steel | Yes | 4 | Straight | 000000 | 00000 | 00000000 | 00000 |
Black Painted Zinc | ||||||||||||||||
| 1/2" | 7/16" | 1 11/16" | 3/8" | 1 11/16" | 3/8" | 0.219" | 180° | Not Rated | Steel | Yes | 4 | Straight | 0000000 | 00000 | 000000 | 00 |
| 11/16" | 5/8" | 1 1/2" | 1/2" | 1 1/2" | 1/2" | 0.063" | 180° | Not Rated | Steel | Yes | 4 | Straight | 0000000 | 00000 | 000000 | 00 |
| 3/4" | 9/16" | 1 1/2" | 1/2" | 1 1/2" | 1/2" | 0.219" | 180° | Not Rated | Steel | Yes | 4 | Straight | 0000000 | 00000 | 000000 | 00 |
| 3/4" | 11/16" | 1 3/4" | 1/2" | 1 3/4" | 1/2" | 0.188" | 180° | Not Rated | Steel | Yes | 4 | Straight | 0000000 | 00000 | 000000 | 00 |
| 3/4" | 11/16" | 2 3/8" | 1/2" | 2 3/8" | 1/2" | 0.250" | 180° | Not Rated | Steel | Yes | 4 | Straight | 0000000 | 00000 | 000000 | 00 |
| 1" | 7/8" | 2 3/4" | 5/8" | 2 3/4" | 5/8" | 0.281" | 180° | Not Rated | Steel | Yes | 4 | Straight | 0000000 | 00000 | 000000 | 00 |
| 1 1/8" | 1 1/16" | 3 3/4" | 3/4" | 3 3/4" | 3/4" | 0.375" | 180° | Not Rated | Steel | Yes | 4 | Straight | 0000000 | 00000 | 000000 | 00 |
| 1 3/8" | 1 7/16" | 4 5/8" | 1" | 4 5/8" | 1" | 0.469" | 180° | Not Rated | Steel | Yes | 4 | Straight | 0000000 | 00000 | 000000 | 00 |
| 1 3/4" | 1 5/8" | 4 5/8" | 1 1/8" | 4 5/8" | 1 1/8" | 0.406" | 180° | Not Rated | Steel | Yes | 8 | Straight | 0000000 | 00000 | 000000 | 00 |
Adjustable Mortise-Mount Concealed Cabinet Hinges
To ensure a good fit, these hinges have screws for horizontal, vertical, and depth adjustments after installation. Hinge leaves fit into two cutouts (mortises) to mount flush with door and frame edges. Mount these hinges to the inside of cabinets and they will be completely hidden from the outside when the door is closed. They are commonly found on washroom and kitchen cabinetry. All of these hinges have a nonremovable pin to deter tampering. Use them on inset doors that are flush with their frame when the door is closed.
Chrome-plated zinc hinges are more corrosion resistant than painted zinc.
For technical drawings and 3-D models, click on a part number.
Door Leaf | Frame Leaf | Adjustment | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Min. Door Thick. | For Cutout Dp. | Ht. | Wd. | Ht. | Wd. | Leaf Thick. | Range of Motion | Capacity, lbs. | Pin Material | Vertical | Horizontal | Dp. | Mounting Fasteners Included | No. of Mounting Holes | Mounting Screw Size | Each | |
For Inset Door—Standard | |||||||||||||||||
Chrome-Plated Zinc—Dull | |||||||||||||||||
| 3/4" | 5/8" | 2 3/4" | 9/16" | 2 3/4" | 9/16" | 0.313" | 180° | 5 | 304 Stainless Steel | 1/16" | 1/32" | 1/16" | Yes | 4 | M4 | 0000000 | 000000 |
| 7/8" | 5/8" | 3 9/16" | 11/16" | 3 9/16" | 11/16" | 0.315" | 180° | 10 | 304 Stainless Steel | 1/16" | 1/16" | 1/32" | Yes | 4 | M4 | 0000000 | 00000 |
| 1 1/8" | 13/16" | 4 3/4" | 15/16" | 4 3/4" | 1" | 0.256" | 180° | 25 | 304 Stainless Steel | 1/8" | 1/16" | 1/32" | Yes | 4 | M5 | 0000000 | 00000 |
Black Painted Zinc | |||||||||||||||||
| 3/4" | 5/8" | 2 3/4" | 9/16" | 2 3/4" | 9/16" | 0.313" | 180° | 5 | 304 Stainless Steel | 1/16" | 1/32" | 1/16" | Yes | 4 | M4 | 0000000 | 00000 |
| 7/8" | 5/8" | 3 9/16" | 11/16" | 3 9/16" | 11/16" | 0.315" | 180° | 10 | 304 Stainless Steel | 1/16" | 1/16" | 1/32" | Yes | 4 | M4 | 0000000 | 00000 |
| 1 1/8" | 13/16" | 4 3/4" | 15/16" | 4 3/4" | 1" | 0.256" | 180° | 25 | 304 Stainless Steel | 1/8" | 1/16" | 1/32" | Yes | 4 | M5 | 0000000 | 00000 |
Barrel-Shaped Mortise-Mount Concealed Cabinet Hinges
Easier to install than other mortise-mount concealed cabinet hinges, these fit in two drilled holes to mount flush with door and frame edges. Mount these hinges to the inside of cabinets and they will be completely hidden from the outside when the door is closed. They are commonly found on washroom and kitchen cabinetry. All of these hinges have a nonremovable pin to deter tampering.
Hinges for inset doors are for doors that are flush with their frame when the door is closed.
Hinges for overlay doors are for doors that cover their frame.
For technical drawings and 3-D models, click on a part number.
| For Min. Door Thick. | For Cutout Dp. | Leaf Dia. | Range of Motion | Pin Material | Mounting Fasteners Included | No. of Mounting Holes | Mounting Hole Style | Mounting Screw Size | Each | |
For Inset Door—Standard | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Brass—Dull | ||||||||||
| 1/2" | 7/16" | 3/8" | 180° | 303 Stainless Steel | No | 2 | Straight | No. 3 | 00000000 | 00000 |
| 11/16" | 1/2" | 7/16" | 180° | Brass | No | 2 | Straight | No. 6 | 00000000 | 0000 |
| 3/4" | 5/8" | 9/16" | 180° | Brass | No | 2 | Straight | No. 6 | 00000000 | 00000 |
For Inset, Overlay Door—Standard | ||||||||||
Brass—Dull | ||||||||||
| 7/8" | 5/8" | 5/8" | 180° | Brass | No | 2 | Countersunk | No. 6 | 00000000 | 0000 |
Surface-Mount Concealed Cabinet Hinges
Easier to install than other concealed cabinet hinges, these do not require a cutout. Mount these hinges to the inside of cabinets and they will be completely hidden from the outside when the door is closed. They are commonly found on washroom and kitchen cabinetry. All of these hinges have a nonremovable pin to deter tampering. Use them on inset doors that are flush with their frame when the door is closed.
Zinc-plated steel hinges have mild corrosion resistance.
Stainless steel hinges are more corrosion resistant than zinc-plated steel. They also have good chemical resistance.
For technical drawings and 3-D models, click on a part number.
Door Leaf | Frame Leaf | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Door Thick. | Ht. | Wd. | Ht. | Wd. | Leaf Thick. | Range of Motion | Pin Material | Mounting Fasteners Included | No. of Mounting Holes | Mounting Hole Style | Mounting Screw Size | Each | |
For Inset Door—Standard | |||||||||||||
Zinc-Plated Steel—Dull | |||||||||||||
| 3/16" | 1/2" | 1 3/16" | 1/2" | 1 3/16" | 0.078" | 180° | Steel | No | 4 | Straight | No. 10 | 000000 | 000000 |
Stainless Steel—Dull | |||||||||||||
| 3/16" | 1/2" | 1 3/16" | 1/2" | 1 3/16" | 0.078" | 180° | Stainless Steel | No | 4 | Straight | No. 10 | 000000 | 00000 |
Semi-Concealed Cabinet Hinges
When the cabinet door is closed, a portion of the frame leaf is exposed and the entire door leaf is hidden. All of these hinges have a nonremovable pin to deter tampering. Hold-closed hinges have spring tension that pulls the door closed when it’s open less than 35° and keeps it closed without a catch or latch.
Zinc-, brass-, and chrome-plated steel hinges have mild corrosion resistance.
Hinges for inset doors are for doors that are flush with their frame when the door is closed.
For technical drawings and 3-D models, click on a part number.
Door Leaf | Frame Leaf | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Door Thick. | Ht. | Wd. | Ht. | Wd. | Leaf Thick. | Range of Motion | Capacity, lbs. | Pin Dia. | Pin Material | Mounting Fasteners Included | No. of Mounting Holes | Mounting Hole Style | Mounting Screw Size | Pair | ||
For Inset Door—Hold-Closed | ||||||||||||||||
Brass-Plated Steel—Dull | ||||||||||||||||
| 5 | 3/4" | 1 7/16" | 1 1/16" | 2 3/4" | 15/32" | 0.063" | 180° | 30 | 11/64" | Steel | Yes | 5 | Straight | No. 5 | 0000000 | 00000 |
Brass-Plated Steel—Polished | ||||||||||||||||
| 5 | 3/4" | 1 7/16" | 1 1/16" | 2 3/4" | 15/32" | 0.063" | 180° | 30 | 11/64" | Steel | Yes | 5 | Straight | No. 6 | 0000000 | 0000 |
Chrome-Plated Steel—Polished | ||||||||||||||||
| 5 | 3/4" | 1 1/2" | 1 1/8" | 2 3/4" | 15/32" | 0.063" | 180° | 30 | 11/64" | Steel | Yes | 5 | Straight | No. 5 | 0000000 | 0000 |
Adjustable Hinges with Holes
Turn a set screw to adjust the door up or down after it's hung. These hinges have a nonremovable pin to deter tampering.
Black powder-coated zinc hinges are best for mostly dry environments. They have mild corrosion resistance.
Stainless steel hinges resist corroding even in wet environments.
For technical drawings and 3-D models, click on a part number.
Door Leaf | Frame Leaf | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Door Thick. | Ht. | Wd. | Ht. | Wd. | O'all Wd. | Leaf Thick. | Range of Motion | Max. Adjustability | Pin Dia. | Pin Material | Mounting Fasteners Included | No. of Mounting Holes | Mounting Hole Style | Mounting Screw Size | Each | ||
Black Powder-Coated Zinc | |||||||||||||||||
| 1 | 3/4" | 2 3/8" | 1 7/16" | 3 15/16" | 5/8" | 2 1/16" | 0.250" | 180° | 1/8" | 1/4" | Brass | No | 4 | Countersunk | M5 | 00000000 | 000000 |
| 2 | 3/4" | 2 3/8" | 4 3/4" | 3 15/16" | 5/8" | 5" | 0.250" | 180° | 1/8" | 1/4" | Brass | No | 6 | Countersunk | M5 | 00000000 | 00000 |
316 Stainless Steel—Dull | |||||||||||||||||
| 3 | 3/4" | 3 15/16" | 3 1/2" | 3 15/16" | 2 1/16" | 4 1/2" | 0.250" | 180° | 5/16" | 3/8" | Stainless Steel | No | 7 | Countersunk | M6 | 00000000 | 000000 |
Narrow-Profile Lift-Off Hinges with Holes
These hinges are the right size for tight spaces and narrow frames. The hinge pin is permanently attached to the frame leaf so you can quickly lift the door off the hinge without removing the pin. Mounting screws (not included) are concealed when the hinge is closed.
Hinges for inset doors are for doors that are flush with their frame when the door is closed. Capacity is per hinge. To choose a door mounting location, stand on the pull side of the door—use a right-side hinge if the hinge is on the right or a left-side hinge if it’s on the left.
For technical drawings and 3-D models, click on a part number.
Door Leaf | Frame Leaf | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Ht. | Wd. | O'all Wd. | Leaf Thick. | Range of Motion | Capacity, lbs. | Pin Dia. | Mounting Fasteners Included | No. of Mounting Holes | Mounting Screw Size | Each | ||
Left Side Door Mounting Location | ||||||||||||||
For Inset Door—Standard | ||||||||||||||
Black Painted Zinc | ||||||||||||||
| 4 | 1" | 13/16" | 5/8" | 3/8" | 13/16" | 0.375" | 180° | 250 | 3/16" | No | 4 | 6-32 | 00000000 | 00000 |
| 4 | 2 1/2" | 1 1/4" | 1 1/4" | 9/16" | 1 1/4" | 0.688" | 180° | 300 | 3/8" | No | 4 | 10-32 | 00000000 | 00000 |
Right Side Door Mounting Location | ||||||||||||||
For Inset Door—Standard | ||||||||||||||
Black Painted Zinc | ||||||||||||||
| 4 | 1" | 13/16" | 5/8" | 3/8" | 13/16" | 0.375" | 180° | 250 | 3/16" | No | 4 | 6-32 | 00000000 | 0000 |
| 4 | 2 1/2" | 1 1/4" | 1 1/4" | 9/16" | 1 1/4" | 0.688" | 180° | 300 | 3/8" | No | 4 | 10-32 | 00000000 | 00000 |
Plastic Narrow-Profile Lift-Off Hinges with Holes
Plastic hinges are a lightweight alternative to metal hinges and provide smooth, silent operation. They are the right size for tight spaces and narrow frames. The hinge pin is permanently attached to the frame leaf so you can quickly lift the door off the hinge without removing the pin. Mounting screws (not included) are concealed when the hinge is closed. Capacity listed is per hinge.
Hinges for inset doors are for doors that are flush with their frame when the door is closed. To choose a door mounting location, stand on the pull side of the door—use a right-side hinge if the hinge is on the right or a left-side hinge if it’s on the left.
For technical drawings and 3-D models, click on a part number.
Door Leaf | Frame Leaf | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Ht. | Wd. | Leaf Thick. | Range of Motion | Capacity, lbs. | Pin Dia. | Max. Temp., °F | Mounting Fasteners Included | No. of Mounting Holes | Mounting Screw Size | Each | |
Left Side Door Mounting Location | |||||||||||||
For Inset Door—Standard | |||||||||||||
Black Nylon Plastic | |||||||||||||
| 1 3/16" | 9/16" | 1 3/16" | 9/16" | 0.656" | 180° | 150 | 3/8" | 140° | No | 4 | No. 10 | 00000000 | 00000 |
| 1 5/8" | 3/4" | 1 5/8" | 3/4" | 0.875" | 180° | 225 | 1/2" | 140° | No | 4 | 1/4" | 00000000 | 0000 |
Right Side Door Mounting Location | |||||||||||||
For Inset Door—Standard | |||||||||||||
Black Nylon Plastic | |||||||||||||
| 1 3/16" | 9/16" | 1 3/16" | 9/16" | 0.656" | 180° | 150 | 3/8" | 140° | No | 4 | No. 10 | 00000000 | 0000 |
| 1 5/8" | 3/4" | 1 5/8" | 3/4" | 0.875" | 180° | 225 | 1/2" | 140° | No | 4 | 1/4" | 00000000 | 0000 |