Choose from nylon, UHMW, and zinc.

A built-in spring maintains tension on your belt.

Use these pulleys with compatible quick-disconnect bushings.

Mount these pulleys with a taper-lock bushing for a tight, wobble-free hold on your shaft.

Acetal and aluminum construction makes these pulleys useful in for weight-sensitive applications.

Move heavy loads without slippage—pulleys mount with a bushing for a more secure grip on the shaft than set screws.

Made of aluminum, these pulleys have good corrosion resistance.

Made from polycarbonate, these pulleys are useful in applications with weight constraints.

Carry heavy loads without slippage—pulleys mount with a bushing for a more secure grip on the shaft than set screws.

Made of aluminum, these pulleys have good corrosion resistance.

Move belts forward and backward or stop and start them in precise positions, especially in areas where rust is a concern.

For higher speed or higher torque applications, these GT series timing belt pulleys provide a more precise fit than HTD pulleys. Use them where accuracy is critical, such as in storage and retrieval systems or in robotics.

Curved teeth with a high pitch provide superior load distribution and reduce wear. They mount with a bushing for a more secure grip on the shaft than set screws.

These pulleys spin freely on built-in bearings to maintain tension for reduced wear and vibration.

These pulleys spin freely on built-in bearings to maintain tension for reduced wear and vibration.

Also known as snatch blocks, these open so it’s easier to feed the rope through the housing—a free rope end is not needed.

Mount these pulleys to a flat surface to assist with horizontal pulling or to guide a rope.

Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or to guide a rope.

Mount these pulleys to a flat surface to assist with horizontal pulling or to guide a rope.

Use the bore to mount these pulleys on a shaft. These pulleys are also known as sheaves.

Also known as snatch blocks, these open so it’s easier to feed the rope through the housing—a free rope end is not needed.

Also known as snatch blocks, these open so it’s easier to feed the rope through the housing—a free rope end is not needed.

These pullers have a cage around the jaws that keeps them aligned so you can secure bearings and pulleys quickly.

Grip bearings, gears, and wheels from the outside edge to pull them off a shaft.

A must-have for HVAC jobs, this puller makes quick work of removing press-fit hubs and fan blades from motor shafts.

Separate bearings, collars, hubs, and other shaft-mounted items so you can remove them.

Clamp these separators into the V-groove of a pulley for a secure grip.

Get a grip on objects with blind holes—these pullers have an expanding collet that secures bearings and bushings from inside.

Complete with a locking storage box, use the pullers in this set to tackle a wide variety of pulling jobs—use pullers to grip objects from the outside or the inside.

Tackle a wide variety of pulling jobs—use pullers in these sets to grip objects from the outside or the inside.

Install and remove bearings, pulleys, sprockets, and other press-fit parts with tapered holes.

Self-locking jaws hold these pullers in place for quick one-hand operation. Spring tension holds the jaws against the object being pulled, so you can tighten the locking nut.