We will reply to your message within an hour.
Made of 1000 series aluminum which is 99% pure, this aluminum offers superior formability, corrosion resistance, and electrical conductivity. It's frequently fabricated into raceways, decorative trim, and other parts where strength and hardness are not required.
These sheets are tempered to a 1/2-hard or full-hard state to make them over twice as strong as standard 1100 aluminum.
Use this foil as a blanket to disperse heat evenly in high-vacuum systems, as well as in clean rooms and other controlled environments where dust and oil could jeopardize a system.
3000 series aluminum stands up to outdoor use, as well as exposure to chemicals. It offers a good combination of strength, formability, and weldability. It's often used for storage tanks, heat exchangers, garage doors, and general sheet metal work.
Known for being one of the easiest types of aluminum to weld, 5052 is also recognized for its ability to resist salt water. It's widely used for the bodies of boats, buses, trucks, and trailers, as well as for chemical drums.
The most widely used aluminum, 6061 is fabricated into everything from pipe fittings and containers to automotive and aerospace parts. It is strong and corrosion resistant, plus it's easy to machine and weld.
Prepare food for cooking and storage with plastic wrap and aluminum foil that's safe for food contact.
Cut this stock into custom shapes to fit your application.
Keep shim stock in a variety of thicknesses on hand with these sets. Cut into custom shapes to fit your application.
A durable acrylic adhesive keeps this shim stock from sliding out of place. Cut it into custom shapes to fit your application.
Cut this shim stock into custom shapes to fit your application. Stock is made of layers of material bonded with adhesive; remove layers with a utility knife until you get the thickness you need.
This shim stock is color coded by thickness for easy identification. Cut it into custom shapes to fit your application.
Keep shim stock in a variety of thicknesses on hand with these sets, which are color coded by thickness for easy identification. Cut them into custom shapes to fit your application.
Create a custom shim to fit your application.
Cover small spots and holes while paint stripping and electroplating, or use as a moisture and dust barrier. These aluminum foil discs are flexible and conform to irregular shapes.
Aluminum foil is laminated to a tough fiberglass cloth to form a high-strength, reflective tape that resists temperatures up to 500° F. Use it for flame-spray masking and wire harness heat shielding.
This tape reflects intense heat to protect sensitive components.
Control the unwanted noise that comes from vibrating panels and support structures. This aluminum foil tape reduces vibration by converting it into a small amount of heat.
Seal foil-jacketed insulation as well as air-conditioning and refrigeration systems with this conformable aluminum tape.
Reinforced with fiberglass, this tape is flexible yet resists tearing. Use it for sealing and patching insulation and duct.
Seal fiberglass duct and insulation that's faced with an all-service jacket (ASJ). Tape is reinforced with fiberglass.
For easy identification, this tape is printed with flexible duct standard UL 181A-P or UL 181B-FX.
Use this tape for a watertight bond on gutters, roofing membranes, and other building materials.
A layer of foil inside this tape will set off metal detectors if it falls into your food processing line, alerting you to the contamination.
The adhesive on this conformable aluminum foil tape is electrically conductive for use on surfaces that can't be soldered. Use it to shield cables and electronic components from EMI (electromagnetic interference).
This polyester tape has a woven mesh edge that conducts electricity. Use it to shield cables and electronic components from EMI (electromagnetic interference).
Use this tape to attach components to heat sinks and metal chassis walls in place of screws and other mechanical fasteners. It conducts heat away from sensitive electronics.
Stick this flexible tape to the back of welding seams to contain spatter and prevent oxygen, water vapor, and other gases from weakening the weld.
For welding large gaps, these strips form a rigid mold for your weld.