Brass Foil | McMaster-Carr

Choose a Category

Clear All

	System of Measurement System of Measurement

Inch

	Thickness Thickness

	Width Width

1/2"

12"

	Length Length

	Material Material	Show

Brass

	Material Material	Hide

	Shim Stock Form Shim Stock Form


Roll	Sheet

	Shape Shape

	Sheet and Bar

	Temper Rating Temper Rating

Softened (Annealed)

1/2 Hard

	Specifications Met Specifications Met

AMS

ASTM

	Individual/Set Individual/Set

Individual

Set

	Magnetic Properties Magnetic Properties

Nonmagnetic

	Minimum Hardness Minimum Hardness

Rockwell 30T56

Not Rated

	Hardness Rating Hardness Rating

Rockwell F60

Rockwell F90

Soft

	Temper Temper

H02

Not Rated

	Heat Treatable Heat Treatable

	Certificate Certificate

	Material Certificate with Traceable Lot Number

	Density Density

0.308 lbs./cu. in.

	Melting Point Temperature Melting Point Temperature

1680° F

	Modulus of Elasticity Modulus of Elasticity

16.0 ksi × 10³

	Surface Resistivity Surface Resistivity

37.5 Ohms

	Thermal Conductivity Thermal Conductivity

70 Btu/hr. × ft./°F @ 68° F

	Yield Strength Yield Strength

30,000 to 99,999 psi

Not Rated

	Elongation Elongation

27%

35%

View catalog pages (7)

Forward

How can we improve?

118 Products

Don't see the shim stock you need? Just tell us what you're looking for and we'll get it for you.

About Copper, Brass, and Bronze

The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware.

Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.

Sheets

Yield Strength: See table
Hardness: See table
Temper: See table
Heat Treatable: No
Specifications Met: ASTM B36

1/2" × 25ft.
Thick.	Thick. Tolerance Range	Yield Strength, psi	Hardness	Temper	Pkg. Qty.		Each
0.002"	-0.0005" to 0.0005"	52,000	Rockwell F90 (Soft)	H02 (1/2 Hard)	__	000000000	000000
1/2" × 50ft.
0.005"	-0.0005" to 0.0005"	52,000	Rockwell F90 (Soft)	H02 (1/2 Hard)	__	000000000	00000
0.01"	-0.002" to 0.002"	52,000	Rockwell F90 (Soft)	H02 (1/2 Hard)	__	000000000	00000
0.015"	-0.002" to 0.002"	52,000	Rockwell F90 (Soft)	H02 (1/2 Hard)	__	000000000	00000
0.02"	-0.002" to 0.002"	52,000	Rockwell F90 (Soft)	H02 (1/2 Hard)	__	000000000	00000
1" × 20ft.
0.002"	-0.0005" to 0.0005"	52,000	Rockwell F90 (Soft)	H02 (1/2 Hard)	__	000000000	00000
0.032"	-0.002" to 0.002"	52,000	Rockwell F90 (Soft)	H02 (1/2 Hard)	__	000000000	00000
1" × 25ft.
0.005"	-0.0005" to 0.0005"	52,000	Rockwell F90 (Soft)	H02 (1/2 Hard)	__	000000000	00000
0.02"	-0.002" to 0.002"	52,000	Rockwell F90 (Soft)	H02 (1/2 Hard)	__	000000000	00000
0.025"	-0.002" to 0.002"	52,000	Rockwell F90 (Soft)	H02 (1/2 Hard)	__	000000000	00000
1" × 35ft.
0.01"	-0.002" to 0.002"	52,000	Rockwell F90 (Soft)	H02 (1/2 Hard)	__	000000000	00000
0.015"	-0.002" to 0.002"	52,000	Rockwell F90 (Soft)	H02 (1/2 Hard)	__	000000000	00000
2" × 15ft.
0.005"	-0.0005" to 0.0005"	52,000	Rockwell F90 (Soft)	H02 (1/2 Hard)	__	000000000	00000
0.01"	-0.002" to 0.002"	52,000	Rockwell F90 (Soft)	H02 (1/2 Hard)	__	000000000	00000
0.015"	-0.002" to 0.002"	52,000	Rockwell F90 (Soft)	H02 (1/2 Hard)	__	000000000	00000
0.025"	-0.002" to 0.002"	52,000	Rockwell F90 (Soft)	H02 (1/2 Hard)	__	000000000	00000
0.032"	-0.002" to 0.002"	52,000	Rockwell F90 (Soft)	H02 (1/2 Hard)	__	000000000	00000
2" × 20ft.
0.002"	-0.0005" to 0.0005"	52,000	Rockwell F90 (Soft)	H02 (1/2 Hard)	__	000000000	00000
2" × 30ft.
0.02"	-0.002" to 0.002"	52,000	Rockwell F90 (Soft)	H02 (1/2 Hard)	__	000000000	00000
4" × 10ft.
0.005"	-0.0005" to 0.0005"	52,000	Rockwell F90 (Soft)	H02 (1/2 Hard)	__	000000000	00000
0.01"	-0.002" to 0.002"	52,000	Rockwell F90 (Soft)	H02 (1/2 Hard)	__	000000000	00000
							Pkg.
12" × 12"
0.005"	-0.0005" to 0.0005"	Not Rated	Rockwell F60 (Soft)	Not Rated (Softened (Annealed))	5	0000000	00000

Shim Stock

Cut it into custom shapes to fit your application. Sheets come flat packed.

For accurate leveling, choose materials such as steel or stainless steel, which are hard enough to resist scratching and deforming. Softer shims, like copper or aluminum, can be used as wear plates between components that rub together, preventing damage to equipment. Metal shims include a material certificate with traceable lot number and test report.

Brass, copper, and bronze shim stock is corrosion resistant and nonmagnetic.

260 Brass Rolls

6" Wd. × 60" Lg.
Thick.	Thick. Tolerance	Min. Hardness	Temper Rating	Certification	Specifications Met		Each
0.001"	-0.0001" to 0.0001"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	000000
0.0015"	-0.00015" to 0.00015"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.002"	-0.0002" to 0.0002"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.003"	-0.0003" to 0.0003"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.004"	-0.0004" to 0.0004"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.005"	-0.0005" to 0.0005"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.006"	-0.0006" to 0.0006"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.007"	-0.0007" to 0.0007"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.008"	-0.0008" to 0.0008"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.009"	-0.0009" to 0.0009"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.01"	-0.001" to 0.001"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.012"	-0.0012" to 0.0012"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.015"	-0.0015" to 0.0015"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.02"	-0.002" to 0.002"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.025"	-0.0025" to 0.0025"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.031"	-0.0031" to 0.0031"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	000000	00000
6" Wd. × 100" Lg.
0.001"	-0.0001" to 0.0001"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.0015"	-0.00015" to 0.00015"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.002"	-0.0002" to 0.0002"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.003"	-0.0003" to 0.0003"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.004"	-0.0004" to 0.0004"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.005"	-0.0005" to 0.0005"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.006"	-0.0006" to 0.0006"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.007"	-0.0007" to 0.0007"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.008"	-0.0008" to 0.0008"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.009"	-0.0009" to 0.0009"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.01"	-0.001" to 0.001"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.012"	-0.0012" to 0.0012"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.015"	-0.0015" to 0.0015"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.018"	-0.0018" to 0.0018"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.02"	-0.002" to 0.002"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.025"	-0.0025" to 0.0025"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.031"	-0.0031" to 0.0031"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	000000
12" Wd. × 120" Lg.
0.001"	-0.0001" to 0.0001"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.002"	-0.0002" to 0.0002"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.003"	-0.0003" to 0.0003"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.004"	-0.0004" to 0.0004"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.005"	-0.0005" to 0.0005"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.006"	-0.0006" to 0.0006"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.008"	-0.0008" to 0.0008"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.01"	-0.001" to 0.001"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.012"	-0.0012" to 0.0012"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	000000
0.015"	-0.0015" to 0.0015"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	000000
0.02"	-0.002" to 0.002"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	000000

260 Brass Sheets

6" Wd. × 25" Lg.
Thick.	Thick. Tolerance	Min. Hardness	Temper Rating	Certification	Specifications Met		Each
0.012"	-0.0012" to 0.0012"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	00000000	000000
0.015"	-0.0015" to 0.0015"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	00000000	00000
0.02"	-0.002" to 0.002"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	00000000	00000
0.025"	-0.001" to 0.001"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	00000000	00000
0.031"	-0.0015" to 0.0015"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	00000000	00000
8" Wd. × 12" Lg.
0.001"	-0.0001" to 0.0001"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B36	00000000	0000
0.002"	-0.0002" to 0.0002"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B36	00000000	0000
0.003"	-0.0003" to 0.0003"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B36	00000000	0000
0.004"	-0.0004" to 0.0004"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B36	00000000	0000
0.005"	-0.0005" to 0.0005"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B36	00000000	0000
0.006"	-0.0003" to 0.0003"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.007"	-0.0007" to 0.0007"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B36	00000000	00000
0.008"	-0.0004" to 0.0004"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.009"	-0.0007" to 0.0007"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.01"	-0.001" to 0.001"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B36	00000000	00000
0.012"	-0.0012" to 0.0012"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B36	00000000	00000
0.015"	-0.0015" to 0.0015"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B36	00000000	00000
0.02"	-0.002" to 0.002"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B36	00000000	00000
0.025"	-0.001" to 0.001"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000
0.031"	-0.0015" to 0.0015"	Rockwell 30T56	1/2 Hard	Material Certificate with Traceable Lot Number and Test Report	ASTM B19, ASTM B36	0000000	00000

Shim Stock Sets

Keep shim stock in a variety of thicknesses on hand with these sets. Cut it into custom shapes to fit your application.Sheets come flat packed.

Brass, copper, and bronze shim stock is corrosion resistant and nonmagnetic.

					Hardness
Material	No. of Pieces	Includes	Wd.	Lg.	Min.	Specifications Met	Magnetic Properties		Each
Sheets
260 Brass	10	One sheet each of the following thicknesses: 0.001" (±0.00015"), 0.002" (±0.0003"), 0.003" (±0.00045"), 0.004" (±0.0006"), 0.005" (±0.00075"), 0.008" (±0.0012"), 0.01" (±0.0015"), 0.013" (±0.00195"), 0.015" (±0.00225"), 0.02" (±0.003")	8"	12"	Rockwell 30T56	ASTM B36	Nonmagnetic	000000	000000
260 Brass	12	One sheet each of the following thicknesses: 0.001" (±0.00015"), 0.0015" (±0.00023"), 0.002" (±0.0003"), 0.003" (±0.00045"), 0.004" (±0.0006"), 0.005" (±0.00075"), 0.006" (±0.0009"), 0.007" (±0.00105"), 0.008" (±0.0012"), 0.01" (±0.0015"), 0.012" (±0.0018"), 0.015" (±0.00225")	6"	12"	Rockwell 30T56	ASTM B19, ASTM B36	Nonmagnetic	0000000	00000

Adhesive-Back Shim Stock

A durable acrylic adhesive keeps this shim stock from sliding out of place. Cut it into custom shapes to fit your application. Shim stock is corrosion resistant. It includes a material certificate with traceable lot number and test report.

Aluminum and brass shim stock are softer than stainless steel, so they can be used as wear plates between components that rub together, preventing damage to equipment. Brass shim stock is more corrosion resistant than aluminum.

260 Brass
Thick.	Thick. Tolerance	Material Thick.	Adhesive Thick.	Adhesive Type	Min. Hardness	Temper Rating	Specifications Met	Liner Type	Magnetic Properties		Each
8" × 12"
0.003"	-0.0001" to 0.0001"	0.001"	0.002"	Acrylic	Rockwell 30T56	1/2 Hard	ASTM B36	Paper	Nonmagnetic	00000000	000000
0.004"	-0.0002" to 0.0002"	0.002"	0.002"	Acrylic	Rockwell 30T56	1/2 Hard	ASTM B36	Paper	Nonmagnetic	00000000	00000
0.005"	-0.0003" to 0.0003"	0.003"	0.002"	Acrylic	Rockwell 30T56	1/2 Hard	ASTM B36	Paper	Nonmagnetic	00000000	00000
0.006"	-0.0004" to 0.0004"	0.004"	0.002"	Acrylic	Rockwell 30T56	1/2 Hard	ASTM B36	Paper	Nonmagnetic	00000000	00000
0.007"	-0.0005" to 0.0005"	0.005"	0.002"	Acrylic	Rockwell 30T56	1/2 Hard	ASTM B36	Paper	Nonmagnetic	00000000	00000
0.008"	-0.0006" to 0.0006"	0.006"	0.002"	Acrylic	Rockwell 30T56	1/2 Hard	ASTM B36	Paper	Nonmagnetic	0000000	00000
0.01"	-0.0008" to 0.0008"	0.008"	0.002"	Acrylic	Rockwell 30T56	1/2 Hard	ASTM B36	Paper	Nonmagnetic	00000000	00000
0.012"	-0.001" to 0.001"	0.01"	0.002"	Acrylic	Rockwell 30T56	1/2 Hard	ASTM B36	Paper	Nonmagnetic	00000000	00000
0.014"	-0.0012" to 0.0012"	0.012"	0.002"	Acrylic	Rockwell 30T56	1/2 Hard	ASTM B36	Paper	Nonmagnetic	00000000	00000
0.017"	-0.0015" to 0.0015"	0.015"	0.002"	Acrylic	Rockwell 30T56	1/2 Hard	ASTM B36	Paper	Nonmagnetic	00000000	00000
0.022"	-0.002" to 0.002"	0.02"	0.002"	Acrylic	Rockwell 30T56	1/2 Hard	ASTM B36	Paper	Nonmagnetic	00000000	00000
0.027"	-0.0025" to 0.0025"	0.025"	0.002"	Acrylic	Rockwell 30T56	1/2 Hard	ASTM B36	Paper	Nonmagnetic	00000000	00000
0.033"	-0.003" to 0.003"	0.031"	0.002"	Acrylic	Rockwell 30T56	1/2 Hard	ASTM B36	Paper	Nonmagnetic	00000000	00000

Peel-Away Layered Shim Stock

Cut this shim stock it into custom shapes to fit your application. Stock is made of layers of material bonded with adhesive; remove layers with a utility knife until you get the thickness you need. To make the layers easier to pull apart, gently heat the shim to soften the adhesive.

Brass shim stock is corrosion resistant and nonmagnetic.

260 Brass

8" × 24"
Thick.	Thick. Tolerance	No. of Layers	Min. Hardness	Temper Rating	Specifications Met	Magnetic Properties		Each
0.002" Layer Thick. (-0.0002" to 0.0002" Tolerance)
0.006"	-0.0005" to 0.001"	3	Not Rated	1/2 Hard	AMS-DTL-22499	Nonmagnetic	0000000	000000
0.008"	-0.0005" to 0.001"	4	Not Rated	1/2 Hard	AMS-DTL-22499	Nonmagnetic	0000000	00000
0.01"	-0.0005" to 0.0015"	5	Not Rated	1/2 Hard	AMS-DTL-22499	Nonmagnetic	0000000	00000
0.016"	-0.001" to 0.0015"	8	Not Rated	1/2 Hard	AMS-DTL-22499	Nonmagnetic	0000000	00000
0.02"	-0.001" to 0.002"	9	Not Rated	1/2 Hard	AMS-DTL-22499	Nonmagnetic	0000000	00000
0.032"	-0.002" to 0.003"	15	Not Rated	1/2 Hard	AMS-DTL-22499	Nonmagnetic	0000000	00000
0.048"	-0.002" to 0.005"	22	Not Rated	1/2 Hard	AMS-DTL-22499	Nonmagnetic	0000000	000000
0.062"	-0.002" to 0.006"	28	Not Rated	1/2 Hard	AMS-DTL-22499	Nonmagnetic	0000000	000000
0.094"	-0.003" to 0.009"	43	Not Rated	1/2 Hard	AMS-DTL-22499	Nonmagnetic	0000000	000000
0.124"	-0.003" to 0.012"	56	Not Rated	1/2 Hard	AMS-DTL-22499	Nonmagnetic	0000000	000000
12" × 12"
0.002" Layer Thick. (-0.0002" to 0.0002" Tolerance)
0.02"	-0.001" to 0.002"	9	Not Rated	1/2 Hard	AMS-DTL-22499	Nonmagnetic	0000000	00000
0.032"	-0.002" to 0.003"	15	Not Rated	1/2 Hard	AMS-DTL-22499	Nonmagnetic	0000000	00000
0.048"	-0.002" to 0.005"	22	Not Rated	1/2 Hard	AMS-DTL-22499	Nonmagnetic	0000000	00000
0.062"	-0.002" to 0.006"	28	Not Rated	1/2 Hard	AMS-DTL-22499	Nonmagnetic	0000000	000000
0.094"	-0.003" to 0.009"	43	Not Rated	1/2 Hard	AMS-DTL-22499	Nonmagnetic	0000000	000000
0.124"	-0.003" to 0.012"	56	Not Rated	1/2 Hard	AMS-DTL-22499	Nonmagnetic	0000000	000000

Shim Stock Assortments

Create a custom shim to fit your application. Includes one sheet of each thickness.

Number of Pieces	Shim Stock Included	Lg.	Wd.	Container Type		Each
59	1010 Low-Carbon Steel—Hardened: 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.01", 0.012", 0.015" 1095 Spring Steel—Hardened: 0.005", 0.01", 0.015", 0.02", 0.025", 0.032" 110 Copper—Softened: 0.005", 0.01", 0.015", 0.02", 0.025" 1100 Aluminum—Hardened: 0.001", 0.002", 0.003", 0.005" 18-8 Stainless Steel—Hardened: 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.01", 0.012", 0.015" 260 Brass—Hardened: 0.001", 0.0015", 0.002", 0.003", 0.004", 0.005", 0.006", 0.007", 0.008", 0.01", 0.012", 0.015" 510 Bronze—Hardened: 0.005", 0.008", 0.01", 0.013", 0.016", 0.02", 0.025", 0.032"	12"	6"	Metal Cabinet	0000000	0000000

Terms and Conditions and Privacy Policy

About Copper, Brass, and Bronze

Ultra-Formable 260 Brass Sheets and Strips

Shim Stock

Shim Stock Sets

Adhesive-Back Shim Stock

Peel-Away Layered Shim Stock

Shim Stock Assortments