System of Measurement System of Measurement | Show |
---|
|
Thickness Thickness |
---|
Shape Shape |
---|
![]() | Sheet and Bar |
Material Material |
---|
|
Tolerance Rating Tolerance Rating |
---|
|
Fabrication Fabrication |
---|
|
Hardness Rating Hardness Rating |
---|
|
Yield Strength Yield Strength |
---|
|
Maximum Hardness After Heat Treatment Maximum HardnessAfter Heat Treatment |
---|
|
Heat Treatable Heat Treatable |
---|
|
Certificate Certificate |
---|
![]() | Material Certificate with Traceable Lot Number |
Minimum Temperature Minimum Temperature |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
Appearance Appearance |
---|
|
Shim Stock Form Shim Stock Form |
---|
![]() | Roll |
Mechanical Finish Mechanical Finish |
---|
|
Specifications Met Specifications Met |
---|
|
Temper Rating Temper Rating |
---|
|
Magnetic Properties Magnetic Properties |
---|
|
More
More
Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength, such as fixture clamps, mounting plates, and spacers. This material can be surface hardened with heat treating.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
Wd., mm | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
2 mm Thick. (-0.06 to 0 mm Tolerance) | ||||
---|---|---|---|---|
6 | 0000000 | |||
12 | 0000000 | |||
20 | 0000000 | |||
25 | 0000000 | |||
3 mm Thick. (-0.06 to 0 mm Tolerance) | ||||
6 | 0000000 | |||
12 | 0000000 | |||
20 | 0000000 | |||
25 | 0000000 | |||
4 mm Thick. (-0.075 to 0 mm Tolerance) | ||||
6 | 0000000 | |||
12 | 0000000 | |||
20 | 0000000 | |||
25 | 0000000 | |||
5 mm Thick. (-0.075 to 0 mm Tolerance) | ||||
6 | 0000000 | |||
12 | 0000000 | |||
20 | 0000000 | |||
25 | 0000000 | |||
6 mm Thick. (-0.075 to 0 mm Tolerance) | ||||
6 | 0000000 | |||
12 | 0000000 | |||
20 | 0000000 | |||
25 | 0000000 | |||
8 mm Thick. (-0.09 to 0 mm Tolerance) | ||||
12 | 0000000 | |||
20 | 0000000 | |||
25 | 0000000 | |||
50 | 0000000 | |||
10 mm Thick. (-0.09 to 0 mm Tolerance) | ||||
12 | 0000000 | |||
20 | 0000000 | |||
25 | 0000000 | |||
50 | 0000000 | |||
15 mm Thick. (-0.11 to 0 mm Tolerance) | ||||
20 | 0000000 | |||
25 | 0000000 | |||
50 | 0000000 | |||
20 mm Thick. (-0.13 to 0 mm Tolerance) | ||||
20 | 0000000 | |||
25 | 0000000 | |||
50 | 0000000 | |||
25 mm Thick. (-0.13 to 0 mm Tolerance) | ||||
25 | 0000000 | |||
50 | 0000000 |
With a thickness that's precision ground to a tight tolerance, these bars are sometimes called flat stock. Low-carbon steel, also known as mild steel, is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength, such as fixture clamps, mounting plates, and spacers. This material can be surface hardened with heat treating.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
Wd., mm | Mechanical Finish | 1 ft. Lg. | 2 ft. Lg. | |
3 mm Thick. (-0.025 to 0.025 mm Tolerance) | ||||
---|---|---|---|---|
10 | Precision Ground | 00000000 | ||
15 | Precision Ground | 00000000 | ||
20 | Precision Ground | 00000000 | ||
25 | Precision Ground | 00000000 | ||
4 mm Thick. (-0.025 to 0.025 mm Tolerance) | ||||
10 | Precision Ground | 00000000 | ||
15 | Precision Ground | 00000000 | ||
20 | Precision Ground | 00000000 | ||
25 | Precision Ground | 00000000 | ||
5 mm Thick. (-0.025 to 0.025 mm Tolerance) | ||||
10 | Precision Ground | 00000000 | ||
15 | Precision Ground | 00000000 | ||
20 | Precision Ground | 00000000 | ||
25 | Precision Ground | 00000000 | ||
10 mm Thick. (-0.025 to 0.025 mm Tolerance) | ||||
10 | Precision Ground | 00000000 | ||
15 | Precision Ground | 00000000 | ||
20 | Precision Ground | 00000000 | ||
25 | Precision Ground | 00000000 |
Also known as flat stock, these precision-ground sheets and bars are held to a tight thickness tolerance. Often used for dies, punches, and gauges, O1 tool steel is an oil-hardening material that resists wear and abrasion.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
3 ft. Lg. | |||||
---|---|---|---|---|---|
Wd., mm | Heat Treatment | Mechanical Finish | Flatness Tolerance | Each | |
3 mm Thick. (0 mm to 0.05 mm Tolerance) | |||||
15 | Annealed (Softened) | Precision Ground | 0.005" per ft. | 0000000 | 000000 |
25 | Annealed (Softened) | Precision Ground | 0.005" per ft. | 0000000 | 00000 |
100 | Annealed (Softened) | Precision Ground | 0.005" per ft. | 0000000 | 000000 |
4 mm Thick. (0 mm to 0.05 mm Tolerance) | |||||
15 | Annealed (Softened) | Precision Ground | 0.005" per ft. | 0000000 | 00000 |
30 | Annealed (Softened) | Precision Ground | 0.005" per ft. | 0000000 | 00000 |
5 mm Thick. (0 mm to 0.05 mm Tolerance) | |||||
15 | Annealed (Softened) | Precision Ground | 0.005" per ft. | 0000000 | 00000 |
20 | Annealed (Softened) | Precision Ground | 0.005" per ft. | 0000000 | 00000 |
25 | Annealed (Softened) | Precision Ground | 0.005" per ft. | 0000000 | 00000 |
30 | Annealed (Softened) | Precision Ground | 0.005" per ft. | 0000000 | 00000 |
6 mm Thick. (0 mm to 0.05 mm Tolerance) | |||||
20 | Annealed (Softened) | Precision Ground | 0.005" per ft. | 0000000 | 00000 |
25 | Annealed (Softened) | Precision Ground | 0.005" per ft. | 0000000 | 00000 |
150 | Annealed (Softened) | Precision Ground | 0.005" per ft. | 0000000 | 000000 |
10 mm Thick. (0 mm to 0.05 mm Tolerance) | |||||
15 | Annealed (Softened) | Precision Ground | 0.005" per ft. | 0000000 | 000000 |
20 | Annealed (Softened) | Precision Ground | 0.005" per ft. | 0000000 | 000000 |
25 | Annealed (Softened) | Precision Ground | 0.005" per ft. | 0000000 | 000000 |
40 | Annealed (Softened) | Precision Ground | 0.005" per ft. | 0000000 | 000000 |
Cut it into custom shapes to fit your application.
For accurate leveling, choose materials such as steel or stainless steel, which are hard enough to resist scratching and deforming. Softer shims, like copper or aluminum, can be used as wear plates between components that rub together, preventing damage to equipment. Metal shims include a material certificate with traceable lot number and test report.
Stainless steel shim stock is more corrosion resistant than steel shim stock.
Carbon steel shim stock has excellent strength and can be welded, but isn't as corrosion resistant as other shims.
Thick. | Thick. Tolerance | Min. Hardness | Temper Rating | Certification | Specifications Met | Each | |
150mm Wd. × 1,250mm Lg. | |||||||
---|---|---|---|---|---|---|---|
0.05mm | -0.0025mm to 0.0025mm | Rockwell C40 | Full Hard | Material Certificate with Traceable Lot Number and Test Report | ASTM A666 | 00000000 | 000000 |
0.1mm | -0.005mm to 0.005mm | Rockwell C40 | Full Hard | Material Certificate with Traceable Lot Number and Test Report | ASTM A666 | 00000000 | 00000 |
0.15mm | -0.0075mm to 0.0075mm | Rockwell C40 | Full Hard | Material Certificate with Traceable Lot Number and Test Report | ASTM A666 | 00000000 | 00000 |
0.2mm | -0.01mm to 0.01mm | Rockwell C40 | Full Hard | Material Certificate with Traceable Lot Number and Test Report | ASTM A666 | 00000000 | 00000 |
0.25mm | -0.0125mm to 0.0125mm | Rockwell C40 | Full Hard | Material Certificate with Traceable Lot Number and Test Report | ASTM A666 | 00000000 | 00000 |
0.3mm | -0.015mm to 0.015mm | Rockwell C40 | Full Hard | Material Certificate with Traceable Lot Number and Test Report | ASTM A666 | 00000000 | 00000 |
0.4mm | -0.02mm to 0.02mm | Rockwell C40 | Full Hard | Material Certificate with Traceable Lot Number and Test Report | ASTM A666 | 00000000 | 00000 |
0.5mm | -0.025mm to 0.025mm | Rockwell C40 | Full Hard | Material Certificate with Traceable Lot Number and Test Report | ASTM A666 | 00000000 | 00000 |
0.65mm | -0.0325mm to 0.0325mm | Rockwell C40 | Full Hard | Material Certificate with Traceable Lot Number and Test Report | ASTM A666 | 00000000 | 00000 |
0.8mm | -0.04mm to 0.04mm | Rockwell C40 | Full Hard | Material Certificate with Traceable Lot Number and Test Report | ASTM A666 | 00000000 | 00000 |
Thick. | Thick. Tolerance | Min. Hardness | Temper Rating | Certification | Specifications Met | Each | |
150mm Wd. × 2,500mm Lg. | |||||||
---|---|---|---|---|---|---|---|
0.05mm | -0.0025mm to 0.0025mm | Rockwell B90 | Full Hard | Material Certificate with Traceable Lot Number and Test Report | ASTM A109, Fed. Spec. QQ-S-698 | 00000000 | 000000 |
0.1mm | -0.005mm to 0.005mm | Rockwell B90 | Full Hard | Material Certificate with Traceable Lot Number and Test Report | ASTM A109, Fed. Spec. QQ-S-698 | 00000000 | 00000 |
0.15mm | -0.0075mm to 0.0075mm | Rockwell B90 | Full Hard | Material Certificate with Traceable Lot Number and Test Report | ASTM A109, Fed. Spec. QQ-S-698 | 00000000 | 00000 |
0.2mm | -0.01mm to 0.01mm | Rockwell B90 | Full Hard | Material Certificate with Traceable Lot Number and Test Report | ASTM A109, Fed. Spec. QQ-S-698 | 00000000 | 00000 |
0.25mm | -0.0125mm to 0.0125mm | Rockwell B90 | Full Hard | Material Certificate with Traceable Lot Number and Test Report | ASTM A109, Fed. Spec. QQ-S-698 | 00000000 | 00000 |
0.3mm | -0.015mm to 0.015mm | Rockwell B90 | Full Hard | Material Certificate with Traceable Lot Number and Test Report | ASTM A109, Fed. Spec. QQ-S-698 | 00000000 | 00000 |
0.4mm | -0.02mm to 0.02mm | Rockwell B90 | Full Hard | Material Certificate with Traceable Lot Number and Test Report | ASTM A109, Fed. Spec. QQ-S-698 | 00000000 | 00000 |
0.5mm | -0.025mm to 0.025mm | Rockwell B90 | Full Hard | Material Certificate with Traceable Lot Number and Test Report | ASTM A109, Fed. Spec. QQ-S-698 | 00000000 | 00000 |
0.65mm | -0.0325mm to 0.0325mm | Rockwell B90 | Full Hard | Material Certificate with Traceable Lot Number and Test Report | ASTM A109, Fed. Spec. QQ-S-698 | 00000000 | 00000 |
0.8mm | -0.04mm to 0.04mm | Rockwell B90 | Full Hard | Material Certificate with Traceable Lot Number and Test Report | ASTM A109, Fed. Spec. QQ-S-698 | 00000000 | 00000 |