Made to NSF/ANSI standards, this latch has a completely sealed magnet to eliminate crevices that can trap food particles. Magnetic force holds doors closed.

Note: Maximum pull-strength rating given is based on installation with the furnished strike plate; pull strength may be different based on the application.

For technical drawings and 3-D models, click on a part number.

Mount these locks horizontally to the face of doors on refrigerators and industrial enclosures with the strike plate mounted on the frame. They're keyed alike, choose them if you need several locks that open with the same key.

Locks have an adjustable strike plate to compensate for changes in offset caused by sagging doors and worn or flattened gaskets. Door offset is the space between the door face and the frame when the door is closed.

For technical drawings and 3-D models, click on a part number.

Quickly align, join, or hold machine components in place in food, pharmaceutical, and other sanitary environments. Pulling the plunger knob and twisting it 90° will lock the nose into its retracted position. All of these plungers have a long nose that offers a large bearing surface to handle side loads. They’re often used for maintenance jobs.

Made of stainless steel, these plungers won’t corrode from frequent washdowns with harsh cleaners and sanitizers. All are self-draining with rounded edges and polished surfaces, so there are no crevices for bacteria to grow, reducing the chance of a foodborne illness. Seals block out water and keep contaminants from getting trapped in threads or grooves. They’re also bright blue, so you can easily spot broken pieces that fall into your line. The seals are FDA compliant for direct contact with food, but the lubricant is rated for incidental contact.

Spring plungers with a sealing nut can be held in place with the nut after threading them to your desired depth. The nut completely covers the threads and has two seals to block out water and other contaminants.

Extended nose force is the force required to begin to depress the nose. Compressed nose force is the force required to depress the nose flush with the body. When using a plunger as a detent or stop, a lighter nose force with a shallower hole releases more easily, while a heavier force with a deeper hole holds more securely.

For technical drawings and 3-D models, click on a part number.