Rated for pressure up to 10,000 psi, these seals withstand the highest pressure of our buffering seals.

Rated for pressure up to 10,000 psi, these seals withstand the highest pressure of our piston seals.

Replace wipers in open-groove cylinders—these wipers have an integral steel case so they press fit into the groove around the rod.

These wipers seal against the cylinder housing to prevent contaminants from entering between the outside edge and the housing.

These leather V-ring packing seals handle over twice the pressure as PTFE. Leather is tough, pliable, and wear resistant, so it flexes to fit uneven surfaces and fill voids.

Fill irregularities in valve stem with these soft PTFE seals.

Greater strength than standard High-Temperature Silicone translates into better shock-absorbing qualities and longer life.

These platinum-cured silicone rubber sheets and strips meet the strict purity standards of USP Class VI.

FDA compliant for use with food and beverage, these rods fit into channels and other narrow spaces for sealing and cushioning.

Use these balls as seals in pumps and check valves, or let them bounce inside of vibrating sifters as an effective screen cleaner.

These natural rubber sheets and strips will stretch up to six times their length. Use them in dynamic applications, such as vibration isolators and shock mounts.

FDA compliant for direct contact with food, these balls are often used to clean screens in vibrating sifters in food, beverage, and other sanitary environments. You can also use them as seals in pumps and check valves.

Made from FDA-compliant materials for use with food and beverage, these sheets and strips won’t degrade from animal and vegetable oils.

Greater tensile strength than standard Food-Grade Oil-Resistant Buna-N rubber gives these sheets and strips better shock-absorbing qualities and longer life. They’re made from FDA-listed materials for use with food and beverage and offer good resistance to animal and vegetable oils.

Loosen fine particles from the grip of vibrating-sifter screens with the bounce of rubber balls. Also use them as seals in pumps and check valves. They’re made from FDA-listed materials for use with food and beverage.

These temperature- and chemical-resistant O-rings prevent leaks in tube fittings that have a straight-thread connection, also known as O-ring boss fittings.

These are the highest purity chemical-resistant O-rings we offer. They are made and bagged in an ISO Class 7 and Fed. Spec. Class 10,000 clean room, plus they’re USP VI certified; not for use in medical applications.

The FEP casing on these O-rings provides the same level of resistance to harsh chemicals as PTFE O-rings, but the core material is soft to make these O-rings more compressible.

Made of Kalrez 6230, these O-rings are for use when high purity is essential, such as with food and semiconductors.

These silicone O-rings withstand temperatures up to 400° F or 450° F.

Also known as Boss O-rings, these O-rings are for use in tube fittings with a straight-thread connection.

These Buna-N O-rings are made of FDA-listed material for use with food and beverage.

If these O-rings deteriorate, they can be picked up by metal detection systems.

Create round-profile O-rings for sealing applications near ovens and other hot areas in your food plant.

Made from PTFE with an EPDM core, these gaskets have added resiliency resulting in a longer product life.

These gaskets meet Fed. Std. Class 10,000 and ISO Class 7 clean room requirements.

These chemical-resistant gaskets have a perforated plate that filters, separates, and strains liquids or dry materials in your line.

These gaskets meet Fed. Spec. Class 10,000 and ISO Class 7 clean room requirements.

Create a tight seal when connecting John Perry fittings.

Create a tight seal when connecting Swedish Milk Standard (SMS) fittings.

If a piece wears off, fragments as small as 1 mm can be picked up by a metal-detection system to prevent contamination of your process line.

These gaskets meet Fed. Std. Class 10,000 and ISO Class 7 clean room requirements.

Use these perforated gaskets to filter liquids and dry materials, as well as create a tight seal in quick-clamp stainless steel sanitary tube fittings. Made of silicone, they handle temperatures up to 450° F, so they’re good for heated ingredients and clean-in-place (CIP) processes.

These gaskets meet Fed. Std. Class 10,000 and ISO Class 7 clean room requirements.

These gaskets have a perforated plate to filter, separate, and strain liquids or dry materials in your line.

Both the FEP casing and the silicone core are made of FDA-listed material. These gaskets resist vegetable and mineral oils, as well as acids and detergents.

Very soft and conformable, this expanded PTFE gasket tape compresses into an extremely thin profile. Use it to create a leak-resistant seal in tight-tolerance applications, such as on precision machinery.

Made of FDA-listed material for use with food and beverage.

Made of FDA-listed material for use with food and beverage.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

These structural sealants combine the mechanical strength of an adhesive with excellent sealing properties and high flexibility.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

These sealants are marine grade, so they stand up to water, corrosion from salt spray, mildew, and UV light.

Apply these thread sealant sticks without a mess.

Often used in high-vibration applications that could cause standard thread sealants to fail, these never fully harden and remain pliable enough to self-heal and stop leaks before they start.

Much thicker than sealants for fine threads, these sealants bridge the gaps between coarse threads.

These sealants come in bottles, cans, and tubes so you can choose the quantity that covers your application.

Completely free of oil and chemically inert, these sealants are safe to use with wet and dry oxygen systems.

This tape has a higher density than standard tape for a better seal between threads.

These silicone foam cords meet NSF/ANSI 51 for food equipment materials. Use them to seal and cushion narrow spaces in food service equipment.

This trim is suitable for use in food preparation and processing environments. It's also chemical resistant. Use it to protect the edges of panels, boards, signs, and mirrors from impact in food processing applications.

Made of FDA listed materials, these plugs are suitable for food contact. They're tapered to fit a range of hole diameters.

Cover standard or flange-mount bearings to protect personnel from injury and keep contaminants out.

Sunlight, ozone, and water won’t affect these washers.

A layer of foil inside this tape will set off metal detectors if it falls into your food processing line, alerting you to the contamination.

In addition to being waterproof, this glue is made of FDA listed materials.

This glue remains flexible after curing to accommodate joint movement.

To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes.

To speed cure time on coated fasteners, aluminum, stainless steel, or titanium, apply these primers before using threadlocker or retaining compound. They also work with no-mix acrylic adhesives.

Brushes are made of FDA listed materials so they can be used for food and beverage conveying.

Add on to an existing screw conveyor or keep it running like new.

Protect cables, cords, and wire and form them into bundles in your food-processing plant while lowering the risk of contaminating the food.

Couplings are made of FDA listed materials, so they’re suitable for food and beverage applications and won’t impart tastes or odors to the product. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.