Keep your hands free for other tasks by triggering switches with your foot.

Back-pivot switches actuate with a tap of the toe. Front-pivot switches reduce fatigue by letting you rest your foot on them. They won't actuate until you lean into them with your bodyweight. Switches with a three-prong outlet allow you to plug your device directly into the switch. You can power both the switch and the device with a single wall outlet—no wiring needed.

Optional guards prevent accidental switch actuation.

Step on these switches to actuate a process hands-free in an area with frequent washdowns. Rated NEMA 6P, 13, and IP68, they protect against corrosion, washdowns, temporary submersion, and oil/coolant spraying. Made of aluminum, they resist corrosion better than iron and steel switches.

Switches without a guard let you easily see the pedal and step on it from many angles.

Switches with a guard shield the pedal from getting accidentally pressed down.

Activate equipment from up to 40 feet away—these switches include a transmitter and a receiver that connects to equipment. The transmitter is rated IP68 and the receiver is rated IP01.

Send signals to equipment up to 130 feet away. Because these foot switches are self-powered, they eliminate the clutter of wires and the fuss of batteries. Connect up to 40 switches to one receiver to set up an automation system that spans your whole facility.

These switches meet EN 60947-5-1, a European safety standard for switches.

Orange switches are easy to spot, reducing the risk you might trip on them.

For technical drawings and 3-D models, click on a part number.

When the pedal is pressed, the built-in potentiometer adjusts the resistance to vary the speed for motor drives. These switches can be wired to either increase or decrease the current when actuated. All are rated NEMA 4 and 13 for protection from washdowns and oil/coolant spraying.

For technical drawings and 3-D models, click on a part number.

Use these switches for intermittent, light duty applications.

IP20 rated switches are suitable for use in dry, indoor environments such as offices or warehouses where there is minimal risk of water exposure.

IP43 rated switches can be used in industrial kitchen settings or around machinery where light water spray might occur.

For technical drawings and 3-D models, click on a part number.

Keep two-position toggle switches safely locked in the off position. These spring-loaded guards will stay up when opened, but return the toggle to the off position when closed.

Guards that meet MIL-G-7703 adhere to strict military standards.

For technical drawings and 3-D models, click on a part number.

Press these switches with your foot for convenient, hands-free operation. They use air pressure to turn circuits on or off, keeping live electrical circuits away from work areas. Use the three-prong outlet to plug a device directly into the switch.

Often used to extend and then retract a cylinder at different speeds, these valves create two actions and have two exhaust ports, which allows you to control the speed of each action by attaching a flow control valve to each exhaust port. Operate them with your foot, leaving your hands free to perform other tasks. Valves direct airflow from the inlet to your equipment and exhaust return airflow to create motion. The foot guard prevents accidental valve operation. Also known as 4-way and 5/2 valves.

Valves with spring return actuation go back to their original position as soon as you release the actuator.

Valves with a foot return actuation stay actuated and go back to their original position only when you step on them again.

Flow coefficient (Cv) is a measurement that indicates how much airflow can pass through a valve.

Also known as 4-way and 4/2 valves, these valves create two actions, such as extending and then retracting a cylinder. Use your foot to operate them, leaving your hands free to perform other tasks. Valves direct airflow from the inlet to your equipment and exhaust return airflow to create motion. Valves without an exhaust connection exhaust air to the atmosphere.

Valves with spring return actuation return to their original position as soon you release the actuator.

Optional safety guards prevent accidental valve actuation.

Flow coefficient (Cv) is a measurement that indicates how much airflow can pass through a valve.

For technical drawings and 3-D models, click on a part number.

Also known as 3-way or 3/2 valves, these valves create one action, such as extending a cylinder. Use your foot to operate them, leaving your hands free to perform other tasks. Valves direct airflow from the inlet to your equipment and exhaust return airflow to create motion. They're normally closed to normally block airflow, and remain closed until actuated. Return actuation is by spring, so they go back to their original position as soon as you release the actuator. In the off position, they exhaust air pressure from the system to the atmosphere, allowing equipment to reset so the action can be repeated.

Flow coefficient (Cv) is a measurement that indicates how much airflow can pass through a valve.

For technical drawings and 3-D models, click on a part number.