Slide these dispensers onto the forks of a forklift to raise a drum, then use the hand chain to tilt and drain it from up to 10 feet away. Drums can rotate 360° in either direction. Chains or straps with ratchet-style tighteners secure the drums. Note: In half-full drums contents shift, which reduces capacity.

Style B dispensers have an additional bracket assembly that grips the drum from the top and bottom.

Optional drum adapters fit inside the saddle to hold 30-gallon drums.

Optional tilt brakes prevent the drum from tilting when not in use.

Warning: Never use to lift people or items over people.

Lift, transport, and place drums without a forklift. Roll these trucks right to the edge of your pallet or platform to load and unload drums. Rear swivel casters make them simple to steer.

Trucks with a gas-spring pump handle raise your drum as you pump down the handle. The leverage of the handle and the power of the gas spring alleviate the weight of the load. Built to prevent tipping, a ratchet mechanism keeps your movements controlled. Three hooks securely hold the drum below the rim.

Trucks with a hydraulic pump require less manual effort to lift and position heavy drums than lift trucks with a gas-spring pump handle. Control up and down movement by activating either a hand or foot lever. A claw-style gripper attaches at one point on the rim of your drum—similar to an electric can opener latching onto a can.

Trucks with retractable legs collapse into a smaller footprint for transportation across tight facilities. Extend the legs before lifting.

Trucks with a counterbalanced base have no front legs, so you can roll them right next to tight cabinets or shelving structures to load or unload your drum.

Polypropylene wheels are lightweight and work on smooth surfaces. Phenolic wheels are nonmarking and roll best on smooth surfaces. Polyurethane wheels are nonmarking, abrasion resistant, and shock absorbent.

Lift heavy drums in seconds—without ever touching them. Powered by a battery-operated hydraulic pump, these trucks grip, lift, lower, and release drums with the push of a button. No manual pumping required. The claw-style grabber won’t release the drum until it’s fully set down. With a lift height over 3 ft., these trucks can stack two drums or load them into most pickup trucks. A V-style base makes it easy to load and unload drums from pallets and platforms. Plug these trucks into any standard wall outlet to charge the battery.

Retractable legs let you maneuver in tight spaces, and two swivel casters at the rear of the truck make steering and pivoting easy. Once the truck is in place, engage the floor lock to keep it stable while you lift and lower loads. The wheels are phenolic, so they’re nonmarking and roll best on smooth surfaces.

A hydraulic lift raises the drum to the required height, and a manual tilt mechanism positions the drum at the proper angle for emptying. Handlers can rotate the drums 360° in either direction. A drum saddle with a chain and ratchet-style tightener secures the drum, and a floor lock keeps these handlers stationary.

Styles A and B have a hand-operated hydraulic lift to position the drum at the required height. They require minimal assembly.

Style C have an electric hydraulic lift that raises the drum with the push of a button and positions the drum at the required height.

Handlers with a crank handle are best for dispensing at lower heights. Handles with a chain hand wheel are easier to use at higher dispensing heights.

Drum adapters fit inside the saddle to hold 30-gallon drums.

Bracket kits for fiber and plastic drums bolt onto the side of the drum saddle and clamp to the top and bottom. They give the handler enough stability to be used with rimless plastic and fiber drums.

Note: In half-full drums contents shift, which reduces capacity.

Warning: Never use to lift people or items over people.

With the push of a button, the electric hydraulic lift raises the drum and a chute controls the flow of the material being dispensed to prevent splashes and spills. A clamp on each side of the chute secures the drum. Handlers have a handheld pendant switch and operate only when the push-buttons are engaged. A limit switch turns off the motor when the drum reaches the maximum height. Load will not drop in the event of a power failure. Screw-down floor locks keep handlers stationary during operation.

Warning: Never use to lift people or items over people.