Forklift Truck Batteries

Filter by

Voltage

Battery Connection

Battery Terminal Configuration

20-Hour Rate Capacity

Battery Size

Height

Battery Chemistry

Width

Depth

Electrical Connection

Battery Cell Type

Cold Cranking Amps

Battery Capacity

Marine Cranking Amps

Positive Quick-Disconnect Tab Size

0.187"

0.25"

Manufacturer Equivalent Number

24M

27M

31M

20-Hour Discharge Rate

Negative Quick-Disconnect Tab Size

0.187"

0.25"

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

DFARS Specialty Metals

REACH

RoHS

Export Control Classification Number (ECCN)

Reserve Capacity

Thread Size

Performance

76 Products

Large-Cell Batteries for Starting


Tab-Post-Terminal Battery Connection	Stud-Terminal Battery Connection	Post-and-Side-Socket Terminal Battery Connection	Post-Terminal Battery Connection

A	C	D	E

Deliver a surge of power to start automobiles and other vehicles. These wet-cell batteries contain electrolyte in an unsealed container, so they must be mounted upright. They may occasionally need to be filled with distilled water.

Cold cranking amps is the maximum amps that a new, fully charged battery can continuously deliver for 30 seconds at 0° F.

Warning: Batteries should always be charged and discharged in a ventilated area.

	Cold Cranking Amps	Thread Size	Ht.	Wd.	Dp.		Each
Wet Cell Lead Acid







	Tab-Post-Terminal Battery Connection

	12	U1	C	300	—	7.3"	7.8"	5.2"	7238K57	000000




			Stud-Terminal Battery Connection

			12	31	D	925	5/16"-18 (Negative Terminal), 3/8"-16 (Positive Terminal)	9.4"	13"	6.8"	7238K85	000000




					Post-and-Side-Socket Terminal Battery Connection

					12	34/78	D	800	—	8.1"	10.2"	6.9"	7597K13	000000


					12	75DT	D	630	—	8.1"	9.4"	6.9"	7597K12	000000




							Post-Terminal Battery Connection

							6	1	A	625	—	8.6"	8.8"	6.8"	7238K17	000000


							12	24	C	585	—	9.1"	10.6"	6.8"	7238K67	000000
							12	8D	E	1,300	—	10"	20.8"	11"	7238K64	000000

Sealed Large-Cell Batteries for Continuous Use


Quick-Disconnect-Terminal Battery Connection	Spring-Terminal Battery Connection	Tab Battery Connection	Tab-Post-Terminal Battery Connection

Threaded-Receptacle-Terminal Battery Connection	A	B	C

E	F	G	H

J	K

Provide backup power for emergency lights, alarm systems, uninterruptible power supplies (UPS) for computers, and other systems that require power over a long period of time. These dry-cell batteries have an absorbed glass mat (AGM) that soaks up the electrolyte, so they’re usable in any position except upside down. They can be recharged hundreds of times.

Warning: Batteries should always be charged and discharged in a ventilated area.

					Quick-Disconnect Tab Size
	Voltage, V DC	Battery Terminal Configuration	20 hr. Rate Cap., A·h	20 hr. Discharge Rate, mA	Positive	Negative	Thread Size	Ht.	Wd.	Dp.		Each
Dry-Cell AGM Lead Acid







				Quick-Disconnect-Terminal Battery Connection

				4	C	4.5	225	0.25"	0.25"	—	3.7"	1.9"	2.1"	7448K57	000000


				4	C	10	500	0.187"	0.187"	—	3.7"	4"	2"	7448K33	00000
				6	A	9	450	0.187"	0.187"	—	4.7"	3.9"	2.2"	7448K15	00000
				6	C	1.2	60	0.187"	0.187"	—	2.2"	3.8"	1"	9579T35	00000
				6	C	1.2	70	0.187"	0.187"	—	2"	3.8"	0.9"	7448K14	00000
				6	C	3.5	175	0.187"	0.187"	—	2.4"	5.3"	1.3"	7448K13	00000
				6	C	7	350	0.187"	0.187"	—	3.7"	6"	1.3"	7448K24	00000
				6	C	12	600	0.187"	0.187"	—	3.7"	6"	2"	7448K34	00000
				6	F	13	650	0.25"	0.187"	—	5.6"	4.3"	2.8"	7448K36	00000
				6	G	5	250	0.187"	0.187"	—	3.9"	2.6"	2.6"	7448K23	00000
				6	H	1	55	0.187"	0.187"	—	2"	2"	1.7"	7448K71	0000


				6	H	4.5	225	0.187"	0.187"	—	3.9"	2.8"	1.9"	7448K53	00000
				6	J	36	1,800	0.25"	0.25"	—	6.5"	6.3"	3.4"	7448K38	00000
				8	E	3.2	160	0.187"	0.187"	—	2.5"	5.3"	1.4"	7448K12	00000
				12	B	26	1,300	0.25"	0.25"	—	4.9"	6.6"	7"	7448K43	000000
				12	C	2.5	125	0.187"	0.187"	—	2.4"	7"	1.4"	7448K18	00000
				12	C	2.9	145	0.187"	0.187"	—	2.4"	7"	1.4"	7448K22	00000
				12	C	5	250	0.187"	0.187"	—	4"	3.5"	2.8"	7448K49	00000
				12	C	5	250	0.25"	0.25"	—	4"	3.5"	2.8"	7448K26	00000
				12	C	6	300	0.25"	0.25"	—	4"	3.5"	2.8"	7448K81	00000
				12	E	1.4	70	0.187"	0.187"	—	2"	3.8"	1.7"	7448K17	00000


				12	E	3.4	170	0.187"	0.187"	—	2.4"	5.2"	2.6"	7448K19	00000
				12	E	12	600	0.187"	0.187"	—	3.7"	6"	4"	7448K28	00000
				12	E	12	600	0.25"	0.25"	—	3.7"	6"	4"	7448K31	00000
				12	K	7	350	0.187"	0.187"	—	3.7"	6"	2.6"	7448K39	00000
				12	K	7	350	0.25"	0.25"	—	3.7"	6"	2.6"	7448K87	00000
				12	K	7.5	390	0.25"	0.25"	—	3.9"	6"	2.6"	7667K81	00000
				12	K	8.5	425	0.25"	0.25"	—	3.7"	5.9"	2.6"	7448K82	00000
				12	K	9	450	0.25"	0.25"	—	3.7"	6"	2.6"	7448K21	00000
				12	K	12	600	0.25"	0.25"	—	3.7"	6"	3.9"	7448K32	00000
				12	K	14	700	0.25"	0.25"	—	3.7"	6"	3.9"	7448K11	00000




						Spring-Terminal Battery Connection

						6	G	5	250	—	—	—	3.9"	2.6"	2.6"	7448K29	00000




								Tab Battery Connection

								6	C	20	1,000	—	—	—	4.9"	6.2"	3.3"	7448K58	00000


								12	B	18	900	—	—	—	6.57"	7.13"	2.99"	7195K75	00000
								12	B	18	900	—	—	—	6.6"	7.1"	3"	7448K51	00000
12								B	40	2,000	—	—	—	6.7"	7.8"	6.5"	7448K45	000000
12	C							28	1,400	—	—	—	7"	6.5"	4.9"	7448K37	000000




		Tab-Post-Terminal Battery Connection

		12	C					35	1,750	—	—	—	6.2"	7.7"	5.1"	7448K52	000000


		12	C					55	2,750	—	—	—	8.2"	9"	5.5"	7448K83	000000
		12	C					78.6	3,750	—	—	—	8.2"	10.3"	6.6"	7448K44	000000
		12	C					100	5,000	—	—	—	8.2"	12"	6.6"	7448K48	000000




								Threaded-Receptacle-Terminal Battery Connection

								12	C	107	5,500	—	—	M8	8.4"	13"	6.7"	7448K85	000000


								Dry-Cell AGM Lead Calcium







												Quick-Disconnect-Terminal Battery Connection

												6	C	8	350	0.25"	0.187"	—	3.7"	6"	1.4"	7448K61	00000

Large-Cell Batteries for Continuous Use


Offset-Stud-Terminal Battery Connection	Stud-Terminal Inside Post Battery Connection


A	D

For use in floor-cleaning machines, lift trucks, personnel carriers, and other vehicles that require power over an extended time, these deep-cycle batteries can handle many charge/deep-discharge cycles. They are wet cell, so they contain electrolyte in an unsealed container and must be mounted upright. They may occasionally need to be filled with distilled water.

Reserve capacity is the number of minutes that a new, fully charged battery can continuously discharge at 25 amps at 80° F. Marine cranking amps is the maximum amps that a new, fully charged battery can continuously deliver for 30 seconds at 32° F.

Warning: Batteries should always be charged and discharged in a ventilated area.

	Battery Cap., A·h	Battery Terminal Configuration	Reserve Cap., min.	Marine Cranking Amps	Thread Size	Ht.	Wd.	Dp.		Each
Wet Cell Lead Acid







	Offset-Stud-Terminal Battery Connection

	6	GC2	—	215	A	395	—	5/16"-18	10.88"	10.25"	7.13"	71805K97	0000000




			Stud-Terminal Inside Post Battery Connection

			12	31	31M	115	D	205	900	5/16"-18 (Negative Terminal), 3/8"-16 (Positive Terminal)	9.4"	13"	6.8"	71805K94	000000

Sealed Large-Cell Batteries for Starting and Continuous Use


Tab-Post-Terminal Battery Connection	Stud-Terminal Battery Connection	Post-and-Stud Terminal Battery Connection	Offset-Tab Post Terminal Battery Connection

Post-and-Side-Socket Terminal Battery Connection	Post-Terminal Battery Connection	A	B

C	D	E

Deliver a surge of power to start automobiles and other vehicles, and provide power over a long time. These batteries are deep cycle, so they can handle many charge/deep discharge cycles. All are dry cell, so they have an absorbed glass mat (AGM) that soaks up the electrolyte and can be used in any position except upside down. They can be recharged hundreds of times.

Warning: Batteries should always be charged and discharged in a ventilated area.

	Battery Cap., A·h	Battery Terminal Configuration	Reserve Cap., min.	Marine Cranking Amps	Thread Size	Ht.	Wd.	Dp.		Each
Dry-Cell AGM Lead Acid







	Tab-Post-Terminal Battery Connection

	12	U1	—	32	C	45	240	—	7.3"	8.3"	5.1"	71805K11	0000000




			Stud-Terminal Battery Connection

			12	31	—	100	D	190	1,050	3/8"-16	9.5"	13"	6.8"	71805K42	000000




					Post-and-Stud Terminal Battery Connection

					6	GC2	—	190	A	380	900	5/16"-18	10.9"	10.3"	7.1"	71805K18	000000


					12	27	27M	92	C	175	900	5/16"-18	9.9"	12.8"	6.8"	71805K14	000000
					12	24	24M	79	C	135	800	5/16"-18	9.9"	10.9"	6.8"	71805K13	000000
					12	31	31M	105	D	200	1,000	5/16"-18	9.4"	12.9"	6.8"	71805K15	000000




							Offset-Tab Post Terminal Battery Connection

							12	22NF	—	55	B	85	420	—	9.3"	9.4"	5.5"	71805K12	000000




									Post-and-Side-Socket Terminal Battery Connection

									12	34/78	—	55	C	120	955	—	8"	10.8"	6.9"	71805K41	000000




											Post-Terminal Battery Connection

											12	4D	—	198	E	380	1,420	—	10"	20.8"	8.5"	71805K16	000000


											12	8D	—	245	E	480	1,800	—	10"	20.8"	11"	71805K17	000000
											12	65	—	75	C	150	955	—	7.6"	12"	7.4"	71805K43	000000

Long-Life Sealed Large-Cell Batteries for Continuous Use


Quick-Disconnect-Terminal Battery Connection	Tab Battery Connection	Threaded-Receptacle-Terminal Battery Connection

B	C	K

Replace batteries less often—these batteries last at least twice as long as standard sealed large-cell batteries. Use them to provide backup power for emergency lights, alarm systems, uninterruptible power supplies (UPS) for computers, and other systems that require power over a long period of time. All are dry cell, so they have an absorbed glass mat (AGM) that soaks up the electrolyte and can be used in any position except upside down. They can be recharged hundreds of times.

Warning: Batteries should always be charged and discharged in a ventilated area.

					Quick-Disconnect Tab Size
	Voltage, V DC	Battery Terminal Configuration	20 hr. Rate Cap., A·h	20 hr. Discharge Rate, mA	Positive	Negative	Thread Size	Ht.	Wd.	Dp.		Each
Dry-Cell AGM Lead Acid







				Quick-Disconnect-Terminal Battery Connection

				6	C	7	360	0.187"	0.187"	—	3.9"	6"	1.3"	2920K1	000000


				6	C	10	600	0.187"	0.187"	—	4"	6"	2"	2920K2	00000
				12	K	7	360	0.187"	0.187"	—	3.9"	6"	2.6"	2920K3	00000




						Tab Battery Connection

						12	B	17.2	850	—	—	—	6.6"	7.1"	3"	2920K4	000000




								Threaded-Receptacle-Terminal Battery Connection

								12	B	28	1,500	—	—	M5	5"	6.6"	7"	2920K6	000000


								12	C	35	1,800	—	—	M6	6.6"	7.7"	5.2"	2920K7	000000
								12	C	60	3,000	—	—	M6	8.5"	9.1"	5.5"	2920K9	000000
								12	C	78	4,000	—	—	M6	8.2"	10.2"	6.7"	2920K12	000000
								12	C	98.8	5,200	—	—	M6	8.2"	12"	6.7"	2920K13	000000

Large-Cell Batteries for Starting and Continuous Use

Post-and-Stud

Terminal

Battery

Connection

These dual-purpose batteries provide a surge of power to start automobiles and other vehicles, and they deliver power over a long period of time. They're deep cycle, so they can handle many charge/deep discharge cycles. Because they are wet-cell batteries and contain electrolyte in an unsealed container, they must be mounted upright. They may occasionally need to be filled with distilled water.

Warning: Batteries should always be charged and discharged in a ventilated area.

	Battery Cap., A·h	Battery Terminal Configuration	Reserve Cap., min.	Marine Cranking Amps	Thread Size	Ht.	Wd.	Dp.		Each
Wet Cell Lead Acid







	Post-and-Stud Terminal Battery Connection

	12	27	27M	100	C	160	730	5/16"-18	9.4"	12"	6.8"	71805K83	0000000


	12	24	24M	70	C	120	625	5/16"-18	9.4"	10.3"	6.8"	71805K82	000000

Sealed Large-Cell Batteries for Starting

Box-Tab

Terminal with

Two Openings

Battery

Connection

Start automobiles and other vehicles with a surge of power. These dry-cell batteries have an absorbed glass mat (AGM) that soaks up the electrolyte, so they’re usable in any position except upside down. They can be recharged hundreds of times.

Cold cranking amps is the maximum amps that a new, fully charged battery can continuously deliver for 30 seconds at 0° F.

Warning: Batteries should always be charged and discharged in a ventilated area.

	Cold Cranking Amps	Ht.	Wd.	Dp.		Each
Dry-Cell AGM Lead Acid







	Box-Tab Terminal with Two Openings Battery Connection

	12	Y50-N18L-A	B	340	6.4"	8.1"	3.6"	7238K12	0000000

Floor Locks

Stabilize carts, trucks, workbenches, and other mobile equipment during loading and unloading. Floor locks bolt or weld to the underside of your equipment and have a spring-loaded base with a nonskid floor pad to keep equipment stationary.

Note: Floor locks are not load rated. They are designed to brake your equipment in place, not lift it off the floor.

Top Brake Retraction Pedal




Mounting Plate Style 2

		Ht.			Mounting Plate			Mounting Hole Ctr.-to-Ctr.
	For Caster Mount Ht.	Extended	Retracted	Clearance	Style	Lg.	Wd.	Lg.	Wd.	Mounting Fasteners Included	For Screw Size	Color		Each
Painted Steel



		5" to 7"	7 1/4"	3 3/8"	3 7/8"	2	4"	4"	2 5/8"	2 3/8"	No	3/8"	Black	2675T11	0000000