These rails have continuous T-slots for attaching fittings. Use this versatile framing to configure machine guards, enclosures, carts, and workstations.

Screw and nut sets or nuts secure brackets and other accessories to rails.

Mount components to these load-rated bearings and track rollers to add linear motion along T-slotted rails.

Add mounting feet and casters to T-slotted framing structures to level equipment, anchor legs to the floor, or add mobility.

Add panels to T-slotted framing to create machine guards, strip doors, and welding curtains.

Use hinges to add doors, lids, and machine guards to T-slotted framing.

Attach and position phones, tablets, monitors, and other displays on T-slotted rails.

Secure doors and windows made of T-slotted framing to protect valuables or restrict access for safety.

Rails are drilled with consistently spaced holes for multiple mounting options that do not require machining. Use this steel bolt-together framing to build guards, tables, and racks.

Half the weight of steel, this aluminum framing resists corrosion in wet environments.

In addition to being lightweight and strong, this plastic framing is nonconductive with good resistance to chemicals and salt water.

Fittings come in two pieces to wrap around rails, so you can quickly modify existing structures without disassembling. Use clamp-on framing and fittings to form temporary partitions, modular conveyors, and workstations.

Slide the strut channel into the tube for telescoping length adjustments.

This welded, one-piece strut channel combines two strut channels side-to-side.

Run cable and tubing in the tightest spaces with channel that is one-quarter the height and one-half the width of regular strut channel.

For compatibility with quick-connect clamps to secure pipe and conduit without screws and tools, this strut channel has narrow slotted holes.

Designed to wrap around the sides of strut channel, these brackets provide a stronger hold than other strut channel brackets.

These brackets have narrow slots compatible with quick-connect clamps for securing pipe and conduit on the channel side of struts without screws or tools.

Provide a stable, nonmarring base for strut channel legs.

Serrated grooves grip the lip of the channel.

Push these nuts into place rather than threading them onto a fastener.

Insert these nuts into the long open side of strut channel and twist to secure. A built-in washer enables one-handed installation.

Connect two channels to create a stacked channel.

Keep a rod securely centered against the strut channel.

Quickly attach these nuts by twisting them closed at any point along a threaded rod.

Add hardware to strut channel without having to hold the washer in place or reach inside the channel.

Keep hardware centered in the strut channel slot.

Brackets mount on the outside of strut channel to allow trolley movement.

Position two strut channels at a 30° to 60° angle, then tighten the bolt to secure.

Cover rough ends of strut channel.

A tab on the end of these shelf brackets fits inside the strut channel for extra stability.

For quick mounting of components, these hangers snap into strut channels for a strong hold and easy repositioning.

Create posts of varying lengths.

Also known as angle brackets.

A rubber seal protects against moisture around the installation hole.

Interlock brackets to secure panels flush to flat surfaces.

These brackets come in one piece that can be cut-to-size with a hacksaw.