About Aluminum
More
Architectural 6063 Aluminum Rectangular Tubes
- Yield Strength: 16,000 psi
- Hardness: Brinell 60 (Soft)
- Temper Rating: See table
- Fabrication: Extruded
- Specifications Met: ASTM B221
More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Outside | Inside | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Ht. | Wd. | Ht. | Wd. | Temper | Heat Treatment | Temperature Range, °F | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
1/16" Wall Thick. (-0.01" to 0.01" Tolerance) | ||||||||||
1/2" | 1/2" | 3/8" | 3/8" | T52 | Hardened | -320° to 212° | 00000000 | |||
1/2" | 1" | 3/8" | 7/8" | T52 | Hardened | -320° to 212° | 00000000 | |||
3/4" | 3/4" | 5/8" | 5/8" | T52 | Hardened | -320° to 212° | 00000000 | |||
1" | 1" | 7/8" | 7/8" | T52 | Hardened | -320° to 212° | 00000000 | |||
1" | 1 1/2" | 7/8" | 1 3/8" | T52 | Hardened | -320° to 212° | 00000000 | |||
1" | 2" | 7/8" | 1 7/8" | T52 | Hardened | -320° to 212° | 00000000 | |||
1 1/4" | 1 1/4" | 1 1/8" | 1 1/8" | T52 | Hardened | -320° to 212° | 00000000 | |||
1/8" Wall Thick. (-0.015" to 0.015" Tolerance) | ||||||||||
3/4" | 3/4" | 1/2" | 1/2" | T52 | Hardened | -320° to 212° | 00000000 | |||
3/4" | 1 1/2" | 1/2" | 1 1/4" | T52 | Hardened | -320° to 212° | 00000000 | |||
1" | 1" | 3/4" | 3/4" | T52 | Hardened | -320° to 212° | 00000000 | |||
1" | 1 1/2" | 3/4" | 1 1/4" | T52 | Hardened | -320° to 212° | 00000000 | |||
1" | 2" | 3/4" | 1 3/4" | T52 | Hardened | -320° to 212° | 00000000 | |||
1" | 3" | 3/4" | 2 3/4" | T52 | Hardened | -320° to 212° | 00000000 | |||
1" | 4" | 3/4" | 3 3/4" | T52 | Hardened | -320° to 212° | 00000000 | |||
1" | 6" | 3/4" | 5 3/4" | T52 | Hardened | -320° to 212° | 00000000 | |||
1 1/4" | 1 1/4" | 1" | 1" | T52 | Hardened | -320° to 212° | 00000000 | |||
1 1/4" | 2 1/2" | 1" | 2 1/4" | T52 | Hardened | -320° to 212° | 00000000 | |||
1 1/2" | 1 1/2" | 1 1/4" | 1 1/4" | T52 | Hardened | -320° to 212° | 00000000 | |||
1 1/2" | 2" | 1 1/4" | 1 3/4" | T52 | Hardened | -320° to 212° | 00000000 | |||
1 1/2" | 3" | 1 1/4" | 2 3/4" | T52 | Hardened | -320° to 212° | 000000000 | |||
1 3/4" | 1 3/4" | 1 1/2" | 1 1/2" | T52 | Hardened | -320° to 212° | 00000000 | |||
1 3/4" | 3" | 1 1/2" | 2 3/4" | T52 | Hardened | -320° to 212° | 00000000 | |||
1 3/4" | 4" | 1 1/2" | 3 3/4" | T52 | Hardened | -320° to 212° | 000000000 | |||
2" | 2" | 1 3/4" | 1 3/4" | T52 | Hardened | -320° to 212° | 00000000 | |||
2" | 3" | 1 3/4" | 2 3/4" | T52 | Hardened | -320° to 212° | 000000000 | |||
2" | 4" | 1 3/4" | 3 3/4" | T52 | Hardened | -320° to 212° | 00000000 | |||
2" | 5" | 1 3/4" | 4 3/4" | T52 | Hardened | -320° to 212° | 00000000 | |||
2" | 6" | 1 3/4" | 5 3/4" | T52 | Hardened | -320° to 212° | 00000000 | |||
2 1/2" | 2 1/2" | 2 1/4" | 2 1/4" | T52 | Hardened | -320° to 212° | 00000000 | |||
3" | 3" | 2 3/4" | 2 3/4" | T52 | Hardened | -320° to 212° | 00000000 | |||
4" | 4" | 3 3/4" | 3 3/4" | T52 | Hardened | -320° to 212° | 00000000 | |||
5" | 5" | 4 3/4" | 4 3/4" | T52 | Hardened | -320° to 212° | 00000000 | |||
6" | 6" | 5 3/4" | 5 3/4" | T52 | Hardened | -320° to 212° | 00000000 | |||
3/16" Wall Thick. (-0.015" to 0.015" Tolerance) | ||||||||||
4" | 4" | 3 5/8" | 3 5/8" | T52 | Hardened | -320° to 212° | 00000000 | |||
4 1/2" | 4 1/2" | 4 1/8" | 4 1/8" | T52 | Hardened | -320° to 212° | 00000000 | |||
5" | 5" | 4 5/8" | 4 5/8" | T52 | Hardened | -320° to 212° | 00000000 | |||
6" | 6" | 5 5/8" | 5 5/8" | T52 | Hardened | -320° to 212° | 00000000 | |||
8" | 8" | 7 5/8" | 7 5/8" | T52 | Hardened | -320° to 212° | 00000000 | |||
1/4" Wall Thick. (-0.025" to 0.025" Tolerance) | ||||||||||
1 1/2" | 3" | 1" | 2 1/2" | T5 | Hardened | -320° to 212° | 00000000 | |||
2" | 2" | 1 1/2" | 1 1/2" | T52 | Hardened | -320° to 212° | 00000000 | |||
2" | 3" | 1 1/2" | 2 1/2" | T5 | Hardened | -320° to 212° | 00000000 | |||
2" | 4" | 1 1/2" | 3 1/2" | T5 | Hardened | -320° to 212° | 00000000 | |||
3" | 3" | 2 1/2" | 2 1/2" | T52 | Hardened | -320° to 212° | 00000000 | |||
4" | 4" | 3 1/2" | 3 1/2" | T52 | Hardened | -320° to 212° | 00000000 | |||
4" | 6" | 3 1/2" | 5 1/2" | T5 | Hardened | -320° to 212° | 00000000 | |||
6" | 6" | 5 1/2" | 5 1/2" | T52 | Hardened | -320° to 212° | 00000000 |