Material Material | Hide |
---|
|
|
Shape Shape |
---|
![]() | ![]() |
Hex Tube | Rectangular Tube |
![]() | |
Round Tube |
OD OD |
---|
ID ID |
---|
Hardness Rating Hardness Rating |
---|
|
|
Yield Strength Yield Strength |
---|
|
Specifications Met Specifications Met |
---|
Density Density |
---|
|
Thermal Conductivity Thermal Conductivity |
---|
|
Heat Treatable Heat Treatable |
---|
|
Modulus of Elasticity Modulus of Elasticity |
---|
|
Fabrication Fabrication |
---|
|
Tolerance Rating Tolerance Rating |
---|
|
Appearance Appearance |
---|
|
Certificate Certificate |
---|
![]() | Material Certificate with Traceable Lot Number |
More
The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware. Each tube fits inside the next larger size for creating telescoping tubes.
For technical drawings and 3-D models, click on a part number.
Outside | Inside | 1 ft. Lg. | ||||||
---|---|---|---|---|---|---|---|---|
Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Ht. | Wd. | Pkg. Qty. | Pkg. | |
0.014" Wall Thick. (-0.001" to 0.001" Tolerance) | ||||||||
1/16" | -0.002" to 0.002" | 1/16" | -0.002" to 0.002" | 0.035" | 0.035" | 2 | 00000000 | 00000 |
3/32" | -0.002" to 0.002" | 3/32" | -0.002" to 0.002" | 0.066" | 0.066" | 2 | 00000000 | 0000 |
3/32" | -0.002" to 0.002" | 3/16" | -0.002" to 0.002" | 0.066" | 0.16" | 1 | 00000000 | 0000 |
1/8" | -0.002" to 0.002" | 1/8" | -0.002" to 0.002" | 0.097" | 0.097" | 1 | 0000000 | 0000 |
1/8" | -0.002" to 0.002" | 1/4" | -0.002" to 0.002" | 0.097" | 0.222" | 1 | 00000000 | 0000 |
5/32" | -0.002" to 0.002" | 5/32" | -0.002" to 0.002" | 0.128" | 0.128" | 1 | 0000000 | 0000 |
5/32" | -0.002" to 0.002" | 5/16" | -0.002" to 0.002" | 0.128" | 0.285" | 1 | 00000000 | 0000 |
3/16" | -0.002" to 0.002" | 3/16" | -0.002" to 0.002" | 0.16" | 0.16" | 1 | 0000000 | 0000 |
3/16" | -0.002" to 0.002" | 3/8" | -0.002" to 0.002" | 0.16" | 0.347" | 1 | 00000000 | 0000 |
7/32" | -0.002" to 0.002" | 7/32" | -0.002" to 0.002" | 0.191" | 0.191" | 1 | 0000000 | 0000 |
1/4" | -0.002" to 0.002" | 1/4" | -0.002" to 0.002" | 0.222" | 0.222" | 1 | 0000000 | 0000 |
The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware.
Tubes with 0.014" and 0.45 mm wall thicknesses allow you to create telescoping tubes; each tube fits inside the next larger size.
OD | OD Tolerance Range | ID | Pkg. Qty. | Pkg. | |
1 ft. Lg. | |||||
---|---|---|---|---|---|
0.014" Wall Thick. (-0.001" to 0.001" Tolerance) | |||||
1/16" | -0.002" to 0.002" | 0.035" | 3 | 00000000 | 00000 |
3/32" | -0.002" to 0.002" | 0.066" | 3 | 0000000 | 0000 |
1/8" | -0.002" to 0.002" | 0.097" | 1 | 0000000 | 0000 |
5/32" | -0.002" to 0.002" | 0.128" | 1 | 0000000 | 0000 |
3/16" | -0.002" to 0.002" | 0.16" | 1 | 0000000 | 0000 |
7/32" | -0.002" to 0.002" | 0.191" | 1 | 0000000 | 0000 |
1/4" | -0.002" to 0.002" | 0.222" | 1 | 0000000 | 0000 |
9/32" | -0.002" to 0.002" | 0.253" | 1 | 0000000 | 0000 |
5/16" | -0.002" to 0.002" | 0.285" | 1 | 0000000 | 0000 |
11/32" | -0.002" to 0.002" | 0.316" | 1 | 0000000 | 0000 |
3/8" | -0.002" to 0.002" | 0.347" | 1 | 0000000 | 0000 |
13/32" | -0.002" to 0.002" | 0.378" | 1 | 0000000 | 0000 |
7/16" | -0.002" to 0.002" | 0.41" | 1 | 0000000 | 0000 |
15/32" | -0.002" to 0.002" | 0.441" | 1 | 0000000 | 0000 |
1/2" | -0.002" to 0.002" | 0.472" | 1 | 0000000 | 0000 |
17/32" | -0.002" to 0.002" | 0.503" | 1 | 0000000 | 0000 |
9/16" | -0.002" to 0.002" | 0.535" | 1 | 0000000 | 0000 |
19/32" | -0.002" to 0.002" | 0.566" | 1 | 0000000 | 0000 |
5/8" | -0.002" to 0.002" | 0.597" | 1 | 0000000 | 0000 |
21/32" | -0.002" to 0.002" | 0.628" | 1 | 0000000 | 0000 |
Each | |||||
0.032" Wall Thick. (-0.004" to 0.004" Tolerance) | |||||
3/16" | -0.004" to 0.004" | 0.124" | __ | 00000000 | 0000 |
1/4" | -0.004" to 0.004" | 0.186" | __ | 00000000 | 0000 |
5/16" | -0.004" to 0.004" | 0.249" | __ | 00000000 | 0000 |
3/8" | -0.004" to 0.004" | 0.311" | __ | 00000000 | 0000 |
1/2" | -0.004" to 0.004" | 0.436" | __ | 00000000 | 0000 |
1" | -0.004" to 0.004" | 0.936" | __ | 00000000 | 00000 |
1 3/8" | -0.004" to 0.004" | 1.311" | __ | 00000000 | 00000 |
2 1/4" | -0.004" to 0.004" | 2.186" | __ | 00000000 | 00000 |
0.049" Wall Thick. (-0.004" to 0.004" Tolerance) | |||||
3/16" | -0.004" to 0.004" | 0.09" | __ | 00000000 | 0000 |
1/4" | -0.004" to 0.004" | 0.152" | __ | 00000000 | 0000 |
5/16" | -0.004" to 0.004" | 0.215" | __ | 00000000 | 0000 |
3/8" | -0.004" to 0.004" | 0.277" | __ | 00000000 | 00000 |
5/8" | -0.004" to 0.004" | 0.527" | __ | 00000000 | 00000 |
3/4" | -0.004" to 0.004" | 0.652" | __ | 00000000 | 00000 |
7/8" | -0.004" to 0.004" | 0.777" | __ | 00000000 | 00000 |
0.065" Wall Thick. (-0.006" to 0.006" Tolerance) | |||||
1/4" | -0.004" to 0.004" | 0.12" | __ | 00000000 | 0000 |
5/16" | -0.004" to 0.004" | 0.183" | __ | 00000000 | 00000 |
3/8" | -0.004" to 0.004" | 0.245" | __ | 00000000 | 00000 |
7/16" | -0.004" to 0.004" | 0.308" | __ | 00000000 | 00000 |
1/2" | -0.004" to 0.004" | 0.37" | __ | 00000000 | 00000 |
5/8" | -0.004" to 0.004" | 0.495" | __ | 00000000 | 00000 |
3/4" | -0.004" to 0.004" | 0.62" | __ | 00000000 | 00000 |
7/8" | -0.004" to 0.004" | 0.745" | __ | 00000000 | 00000 |
1" | -0.004" to 0.004" | 0.87" | __ | 00000000 | 00000 |
1 1/8" | -0.004" to 0.004" | 0.995" | __ | 00000000 | 00000 |
1 1/4" | -0.004" to 0.004" | 1.12" | __ | 00000000 | 00000 |
1 3/8" | -0.004" to 0.004" | 1.245" | __ | 00000000 | 00000 |
1 1/2" | -0.004" to 0.004" | 1.37" | __ | 00000000 | 00000 |
1 5/8" | -0.004" to 0.004" | 1.495" | __ | 00000000 | 00000 |
1 3/4" | -0.004" to 0.004" | 1.62" | __ | 00000000 | 00000 |
1 7/8" | -0.004" to 0.004" | 1.745" | __ | 00000000 | 00000 |
2 1/2" | -0.004" to 0.004" | 2.37" | __ | 00000000 | 00000 |
Pkg. | |||||
3 ft. Lg. | |||||
0.014" Wall Thick. (-0.001" to 0.001" Tolerance) | |||||
1/16" | -0.002" to 0.002" | 0.035" | 5 | 00000000 | 00000 |
3/32" | -0.002" to 0.002" | 0.066" | 5 | 00000000 | 00000 |
1/8" | -0.002" to 0.002" | 0.097" | 5 | 00000000 | 00000 |
5/32" | -0.002" to 0.002" | 0.128" | 5 | 00000000 | 00000 |
3/16" | -0.002" to 0.002" | 0.16" | 6 | 00000000 | 00000 |
7/32" | -0.002" to 0.002" | 0.191" | 6 | 00000000 | 00000 |
1/4" | -0.002" to 0.002" | 0.222" | 5 | 00000000 | 00000 |
9/32" | -0.002" to 0.002" | 0.253" | 5 | 00000000 | 00000 |
5/16" | -0.002" to 0.002" | 0.285" | 4 | 00000000 | 00000 |
11/32" | -0.002" to 0.002" | 0.316" | 1 | 00000000 | 0000 |
3/8" | -0.002" to 0.002" | 0.347" | 3 | 00000000 | 00000 |
13/32" | -0.002" to 0.002" | 0.378" | 1 | 00000000 | 0000 |
7/16" | -0.002" to 0.002" | 0.41" | 1 | 00000000 | 0000 |
15/32" | -0.002" to 0.002" | 0.441" | 1 | 00000000 | 00000 |
1/2" | -0.002" to 0.002" | 0.472" | 1 | 00000000 | 00000 |
17/32" | -0.002" to 0.002" | 0.503" | 1 | 00000000 | 00000 |
9/16" | -0.002" to 0.002" | 0.535" | 1 | 00000000 | 00000 |
19/32" | -0.002" to 0.002" | 0.566" | 1 | 00000000 | 00000 |
5/8" | -0.002" to 0.002" | 0.597" | 1 | 00000000 | 00000 |
21/32" | -0.002" to 0.002" | 0.628" | 1 | 00000000 | 00000 |
Each | |||||
0.032" Wall Thick. (-0.004" to 0.004" Tolerance) | |||||
3/16" | -0.004" to 0.004" | 0.124" | __ | 00000000 | 00000 |
1/4" | -0.004" to 0.004" | 0.186" | __ | 00000000 | 00000 |
5/16" | -0.004" to 0.004" | 0.249" | __ | 00000000 | 00000 |
3/8" | -0.004" to 0.004" | 0.311" | __ | 00000000 | 00000 |
1/2" | -0.004" to 0.004" | 0.436" | __ | 00000000 | 00000 |
1" | -0.004" to 0.004" | 0.936" | __ | 00000000 | 00000 |
1 3/8" | -0.004" to 0.004" | 1.311" | __ | 00000000 | 00000 |
2 1/4" | -0.004" to 0.004" | 2.186" | __ | 00000000 | 00000 |
0.049" Wall Thick. (-0.004" to 0.004" Tolerance) | |||||
3/16" | -0.004" to 0.004" | 0.09" | __ | 00000000 | 00000 |
1/4" | -0.004" to 0.004" | 0.152" | __ | 00000000 | 00000 |
5/16" | -0.004" to 0.004" | 0.215" | __ | 00000000 | 00000 |
3/8" | -0.004" to 0.004" | 0.277" | __ | 00000000 | 00000 |
5/8" | -0.004" to 0.004" | 0.527" | __ | 00000000 | 00000 |
3/4" | -0.004" to 0.004" | 0.652" | __ | 00000000 | 00000 |
7/8" | -0.004" to 0.004" | 0.777" | __ | 00000000 | 00000 |
0.065" Wall Thick. (-0.006" to 0.006" Tolerance) | |||||
1/4" | -0.004" to 0.004" | 0.12" | __ | 00000000 | 00000 |
5/16" | -0.004" to 0.004" | 0.183" | __ | 00000000 | 00000 |
3/8" | -0.004" to 0.004" | 0.245" | __ | 00000000 | 00000 |
7/16" | -0.004" to 0.004" | 0.308" | __ | 00000000 | 00000 |
1/2" | -0.004" to 0.004" | 0.37" | __ | 00000000 | 00000 |
5/8" | -0.004" to 0.004" | 0.495" | __ | 00000000 | 00000 |
3/4" | -0.004" to 0.004" | 0.62" | __ | 00000000 | 00000 |
7/8" | -0.004" to 0.004" | 0.745" | __ | 00000000 | 00000 |
1" | -0.004" to 0.004" | 0.87" | __ | 00000000 | 00000 |
1 1/8" | -0.004" to 0.004" | 0.995" | __ | 00000000 | 00000 |
1 1/4" | -0.004" to 0.004" | 1.12" | __ | 00000000 | 00000 |
1 3/8" | -0.004" to 0.004" | 1.245" | __ | 00000000 | 00000 |
1 1/2" | -0.004" to 0.004" | 1.37" | __ | 00000000 | 00000 |
1 5/8" | -0.004" to 0.004" | 1.495" | __ | 00000000 | 000000 |
1 3/4" | -0.004" to 0.004" | 1.62" | __ | 00000000 | 000000 |
1 7/8" | -0.004" to 0.004" | 1.745" | __ | 00000000 | 000000 |
2 1/2" | -0.004" to 0.004" | 2.37" | __ | 00000000 | 000000 |
300 mm Lg. | |||||
---|---|---|---|---|---|
OD, mm | OD Tolerance Range, mm | ID, mm | Pkg. Qty. | Pkg. | |
0.45 mm Wall Thick. (-0.025 to 0.025 mm Tolerance) | |||||
2 | -0.051 to 0.051 | 1.1 | 4 | 00000000 | 00000 |
3 | -0.051 to 0.051 | 2.1 | 4 | 00000000 | 0000 |
4 | -0.051 to 0.051 | 3.1 | 3 | 00000000 | 0000 |
5 | -0.051 to 0.051 | 4.1 | 3 | 00000000 | 0000 |
6 | -0.051 to 0.051 | 5.1 | 2 | 00000000 | 0000 |
7 | -0.051 to 0.051 | 6.1 | 2 | 00000000 | 0000 |
8 | -0.051 to 0.051 | 7.1 | 2 | 00000000 | 0000 |
9 | -0.051 to 0.051 | 8.1 | 1 | 00000000 | 0000 |
10 | -0.051 to 0.051 | 9.1 | 1 | 00000000 | 0000 |
The most formable brass we offer, 260 offers better weldability than 300 series brass but it’s not as machinable. Sometimes called cartridge brass, it's commonly used for ammunition casings, radiator components, and decorative door hardware.
For technical drawings and 3-D models, click on a part number.
Offering the highest yield strength of all our brass, 330 has a low lead content for a good balance of machinability and formability. It's used for fire station poles, pump cylinder lines, and plumbing accessories.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
OD | OD Tolerance Range | ID | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
1/8" Wall Thick. (-0.008" to 0.008" Tolerance) | ||||||
---|---|---|---|---|---|---|
5/8" | -0.002" to 0.002" | 3/8" | 0000000 | |||
3/4" | -0.0025" to 0.0025" | 1/2" | 0000000 | |||
7/8" | -0.0025" to 0.0025" | 5/8" | 0000000 | |||
1" | -0.003" to 0.003" | 3/4" | 0000000 | |||
1 1/4" | -0.003" to 0.003" | 1" | 0000000 | |||
1 3/8" | -0.003" to 0.003" | 1 1/8" | 0000000 | |||
1 1/2" | -0.003" to 0.003" | 1 1/4" | 0000000 | |||
2" | -0.003" to 0.003" | 1 3/4" | 0000000 | |||
2 1/2" | -0.004" to 0.004" | 2 1/4" | 0000000 |