Selecting Clamps Using Pipe, Conduit, or Tubing Trade Size
More
T-Slotted Framing Caps, Covers, and Seals
Seal T-slots, rail ends, and gaps between rails to keep out dust, debris, and other contaminants.
For technical drawings and 3-D models, click on a part number.
Antislip covers add traction to a rail. They can be cut to size with scissors. Push them into a T-slot.
For Rail Ht. | ||||||||
---|---|---|---|---|---|---|---|---|
Single | Double, Quad | Triple | For T-Slot Wd. | Projection | Material | Color | Each | |
6 ft. Lg. | ||||||||
1" | 2" | 3" | 0.256" | 1/8" | Plastic/Rubber Blend | Black | 000000000 | 000000 |
1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 0.32", 8mm | 5/32" | Plastic/Rubber Blend | Black | 000000000 | 00000 |
25mm | 50mm | __ | 6.5mm | 5/32" | Plastic/Rubber Blend | Black | 00000000 | 00000 |
45mm | 90mm | __ | 10mm | 3/16" | EPDM Rubber | Black | 0000000 | 00000 |
12 ft. Lg. | ||||||||
1" | 2" | 3" | 0.256" | 1/8" | Plastic/Rubber Blend | Black | 000000000 | 00000 |
1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 0.32", 8mm | 5/32" | Plastic/Rubber Blend | Black | 000000000 | 00000 |
25mm | 50mm | __ | 6.5mm | 5/32" | Plastic/Rubber Blend | Black | 00000000 | 00000 |
45mm | 90mm | __ | 10mm | 3/16" | EPDM Rubber | Black | 00000000 | 00000 |
Seals cover door gaps and rail end connections to keep out air and dust.
Bulb seals compress better than solid seals, but water can leak from the top or bottom when your door is ajar.
Inline wiper seals deflect water and dust when in motion.
Flexible seals can be cut to size with scissors. Press them into a T-slot.
Rigid seals quickly snap into a T-slot for a secure hold.
For Rail Ht. | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Single | Double, Quad | Triple | For T-Slot Wd. | Lg., ft. | Wd. | Projection | Bulb Ht. | Offset | Required Door Gap | Flexibility | Color | Each | |
Inline | |||||||||||||
EPDM Rubber | |||||||||||||
1" | 2" | 3" | 0.256" | 6 | 3/8" | 11/32" | 1/4" | __ | 5/32" | Rigid | Black | 0000000 | 000000 |
1" | 2" | 3" | 0.256" | 6 | 1/2" | 1/4" | 3/16" | __ | 1/8" | Rigid | Black | 00000000 | 00000 |
1" | 2" | 3" | 0.256" | 6 | 3/4" | 9/16" | 3/8" | __ | 1/4" | Rigid | Black | 00000000 | 00000 |
1" | 2" | 3" | 0.256" | 6 | 3/4" | 5/8" | 9/16" | __ | 3/8" | Rigid | Black | 00000000 | 00000 |
1" | 2" | 3" | 0.256" | 6 | 15/16" | 27/32" | 3/4" | __ | 1/2" | Rigid | Black | 00000000 | 00000 |
1 | 3", 80mm | 4 | 0.32", 8mm | 6 | 3/8" | 11/32" | 1/4" | __ | 5/32" | Rigid | Black | 00000000 | 00000 |
1 | 3", 80mm | 4 | 0.32", 8mm | 6 | 1/2" | 1/4" | 3/16" | __ | 1/8" | Rigid | Black | 00000000 | 00000 |
1 | 3", 80mm | 4 | 0.32", 8mm | 6 | 3/4" | 5/16" | 5/16" | __ | 1/4" | Flexible | Black | 000000000 | 00000 |
1 | 3", 80mm | 4 | 0.32", 8mm | 6 | 3/4" | 9/16" | 3/8" | __ | 1/4" | Rigid | Black | 00000000 | 00000 |
1 | 3", 80mm | 4 | 0.32", 8mm | 6 | 3/4" | 5/8" | 9/16" | __ | 3/8" | Rigid | Black | 00000000 | 00000 |
1 | 3", 80mm | 4 | 0.32", 8mm | 6 | 15/16" | 27/32" | 3/4" | __ | 1/2" | Rigid | Black | 00000000 | 00000 |
Inline Wiper | |||||||||||||
EPDM Rubber | |||||||||||||
1" | 2" | 3" | 0.256" | 6 | 5/8" | 7/16" | 3/8" | __ | __ | Rigid | Black | 00000000 | 00000 |
1 | 3", 80mm | 4 | 0.32", 8mm | 6 | 5/8" | 7/16" | 3/8" | __ | __ | Rigid | Black | 00000000 | 00000 |
Offset | |||||||||||||
PVC Plastic/TPE Rubber | |||||||||||||
1 | 3", 60mm, 80mm | 4 | 0.32", 8mm | 6 1/2 | 1 3/16" | 1/2" | 1/4" | 7/8" | __ | Rigid | Gray | 00000000 | 00000 |
45mm | 90mm | __ | 10mm | 6 1/2 | 1 1/2" | 15/32" | 1/4" | 1 1/8" | __ | Rigid | Gray | 00000000 | 00000 |
Seals cover door gaps and rail end connections to keep out air and dust.
Solid seals don’t hold water since they have no openings. However, they don’t compress as well as bulb and brush seals, so they require a precise door gap. They quickly snap into a T-slot for a secure hold.
For Rail Ht. | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Single | Double, Quad | Triple | For T-Slot Wd. | Lg., ft. | Wd. | Projection | Material | Color | Each | |
1" | 2" | 3" | 0.256" | 6 | 1/2" | 3/8" | EPDM Rubber | Black | 0000000 | 000000 |
1" | 2" | 3" | 0.256" | 6 | 5/8" | 9/16" | EPDM Rubber | Black | 00000000 | 00000 |
1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 0.32", 8mm | 6 | 1/2" | 3/8" | EPDM Rubber | Black | 00000000 | 00000 |
1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 0.32", 8mm | 6 | 5/8" | 9/16" | EPDM Rubber | Black | 00000000 | 00000 |
Seals cover door gaps and rail end connections to keep out air and dust.
Wiper seals deflect water and dust when in motion. They can be cut to size with scissors.
For Rail Ht. | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Single | Double, Quad | Triple | For T-Slot Wd. | Lg., ft. | Wd. | Projection | Material | Color | Each | |
1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 0.32", 8mm | 6 1/2 | 7/16" | 7/8" | Nitrile Rubber | Black | 000000000 | 000000 |
Panel gaskets seal out liquid and dust while holding panels securely in place. Once installed, the gasket isn’t noticeable. However, the panel and gasket need to be installed before the structure is fully assembled. Press them into a T-slot.
For Rail Ht. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Single | Double, Quad | Triple | For T-Slot Wd. | For Panel Thick. | Lg., ft. | Material | Temperature Range, °F | Hardness | Hardness Rating | Color | Each | |
1", 25mm | 2", 50mm | 3", 75mm | 0.256", 6mm | 5 mm | 6 | TPE Rubber | -20° to 275° | Durometer 65A | Medium Hard | Black | 0000000 | 00000 |
1", 25mm | 2", 50mm | 3", 75mm | 0.256", 6mm | 5 mm | 6 | Silicone Rubber | -95° to 435° | Durometer 65A | Medium Hard | Gray | 0000000 | 00000 |
1 | 3", 60mm, 80mm | 4 | 0.32", 8mm | 6 mm | 6 1/2 | TPE Rubber | -20° to 275° | Durometer 65A | Medium Hard | Black | 00000000 | 00000 |
1 | 3", 80mm | 4 | 0.32", 8mm | 6 mm | 6 1/2 | Silicone Rubber | -95° to 435° | Durometer 65A | Medium Hard | Gray | 0000000 | 00000 |
20mm | 40mm | __ | 5mm | 3 mm | 6 1/2 | TPE Rubber | -20° to 275° | Durometer 65A | Medium Hard | Black | 0000000 | 00000 |
45mm | 90mm | __ | 10mm | 5 mm | 6 1/2 | TPE Rubber | -20° to 275° | Durometer 65A | Medium Hard | Black | 0000000 | 00000 |
45mm | 90mm | __ | 10mm | 6 mm | 6 1/2 | TPE Rubber | -20° to 275° | Durometer 65A | Medium Hard | Black | 00000000 | 00000 |
Panel gaskets seal out liquid and dust while holding panels securely in place. Once installed, the gasket isn’t noticeable. However, the panel and gasket need to be installed before the structure is fully assembled. Press them into a T-slot.
For Rail Ht. | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Single | Double, Quad | Triple | For T-Slot Wd. | For Panel Thick. | Lg., ft. | Material | Temperature Range, °F | Hardness | Hardness Rating | Color | Each | |
40 mm | 80 mm | 120 mm | 8 mm | 6 mm | 6 1/2 | TPE Rubber | 0° to 155° | Durometer 60A | Medium Hard | Gray | 0000000 | 00000 |
40 mm | 80 mm | 120 mm | 8 mm | 6 mm | 6 1/2 | TPE Rubber | 0° to 155° | Durometer 60A | Medium Hard | Black | 0000000 | 0000 |
Panel gaskets seal out liquid and dust while holding panels securely in place. Quick-install panel gaskets can be installed after what you’re building is assembled, but they’re more visible than other panel gasket types.
For Rail Ht. | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Single | Double, Quad | For T-Slot Wd. | For Panel Thick. | Lg., ft. | Material | Temperature Range, °F | Hardness | Hardness Rating | Color | Each | |
45 mm | 90 mm | 10 mm | 10 mm | 6 1/2 | Polypropylene Plastic/TPE Rubber | 32° to 300° | Durometer 65A | Medium Hard | Black | 0000000 | 000000 |
T-Slotted Framing Bumpers
Bumpers and surface guards cushion doors and other moving parts to prevent damage and reduce noise.
Bumpers cushion a single point. Surface guards can be cut to cover the exact length of your T-slotted rail. Polyurethane and TPE resist abrasion better than foam, standing up to the wear of daily use.
For technical drawings and 3-D models, click on a part number.
For Rail Ht. | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Single | Double and Quad | Triple | OD | Projection | Color | Material | Bumper Shape | Mounting Fasteners Included | Each | |
1" | 2" | 3" | 3/4" | 3/4" | Black | Polyurethane Rubber | Round | Yes | 00000000 | 000000 |
1" | 2" | 3" | 1" | 9/16" | Black | SBR Rubber | Round | Yes | 00000000 | 0000 |
1" | 2" | 3" | 1" | 13/16" | Black | Nitrile Rubber | Tapered Round | Yes | 00000000 | 0000 |
1 1/2" | 3" | 4 1/2" | 1 1/4" | 1" | Black | Nitrile Rubber | Tapered Round | Yes | 00000000 | 0000 |
1 1/2" | 3" | 4 1/2" | 1 1/4" | 1 1/4" | Black | Polyurethane Rubber | Round | Yes | 00000000 | 00000 |
1 1/2" | 3" | 4 1/2" | 1 1/2" | 5/8" | Black | SBR Rubber | Round | Yes | 00000000 | 0000 |
1 1/2" | 3" | 4 1/2" | 1 1/2" | 13/16" | Black | Polyurethane Rubber | Round | Yes | 00000000 | 00000 |
1 1/2" | 3" | 4 1/2" | 1 1/2" | 1 1/4" | Black | Nitrile Rubber | Tapered Round | Yes | 00000000 | 0000 |
25mm, 30mm | 50mm, 60mm | __ | 1" | 9/16" | Black | SBR Rubber | Round | Yes | 0000000 | 0000 |
30mm | 60mm | 90mm | 1" | 13/16" | Black | Nitrile Rubber | Tapered Round | Yes | 00000000 | 0000 |
30mm | 60mm | 90mm | 1 1/4" | 1" | Black | Nitrile Rubber | Tapered Round | Yes | 00000000 | 0000 |
30mm | 60mm | 90mm | 1 1/2" | 1 1/4" | Black | Nitrile Rubber | Tapered Round | Yes | 00000000 | 00000 |
40mm | 80mm | 120mm | 1 1/4" | 1 5/16" | Black | Polyurethane Rubber | Round | Yes | 0000000 | 00000 |
40mm | 80mm | 120mm | 1 3/4" | 1 11/16" | Black | Polyurethane Rubber | Round | Yes | 00000000 | 00000 |
40mm, 45mm | 80mm, 90mm | 120mm | 1 1/2" | 5/8" | Black | SBR Rubber | Round | Yes | 00000000 | 0000 |
Concealed bumpers mount into a rail slot to gently stop rail slides and other moving parts inside the rail.
For Rail Ht. | ||||||||
---|---|---|---|---|---|---|---|---|
Single | Double and Quad | Triple | Lg. | Color | Material | Mounting Fasteners Included | Each | |
1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 1 9/16" | Silver | Nitrile Rubber | Yes | 00000000 | 00000 |
Surface guards are flexible enough to be pushed into a rail slot, where they’ll stay without fasteners. Flat surface guards fit into a rail slot and protect one side when used alone. Flat surface guards with a corner edge press into a rail slot and protect one corner and a side. To protect two connecting sides of a rail, combine a flat surface guard with one that has a corner edge.
Guards with static control protect sensitive electronic equipment by preventing the buildup of electrostatic discharge. High-visibility guards are often used in high-traffic areas to warn people of a hazard.
Surface Guards | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Rail Ht. | End Caps | Corner Caps | ||||||||||||
Single | Double and Quad | Triple | Lg., ft. | Wd. | Projection | Color | Material | Safety Properties | Each | Each | Each | |||
Flat | ||||||||||||||
1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 6 1/2 | 1 9/16" | 5/8" | Black | TPE Rubber | __ | 00000000 | 000000 | 00000000 | 00000 | 000000 | 00 |
1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 6 1/2 | 1 9/16" | 5/8" | Black | TPE Rubber | Static Control | 00000000 | 000000 | 00000000 | 0000 | 000000 | 00 |
1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 6 1/2 | 1 9/16" | 5/8" | Black/Yellow | TPE Rubber | High Visibility | 00000000 | 00000 | 00000000 | 0000 | 000000 | 00 |
Flat with Corner Edge | ||||||||||||||
1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 6 1/2 | 2 3/16" | 5/8" | Black | TPE Rubber | __ | 00000000 | 00000 | 00000000 | 0000 | 00000000 | 00000 |
1 1/2", 40mm | 3", 80mm | 4 1/2", 120mm | 6 1/2 | 2 3/16" | 5/8" | Black | TPE Rubber | Static Control | 00000000 | 000000 | 00000000 | 0000 | 00000000 | 0000 |
Clamp-On Framing and Fittings
Fittings come in two pieces to clasp over rails, making assembly and disassembly quicker than our other framing. Use it to form temporary partitions, modular conveyors, and workstations. To assemble, clamp fittings onto the rail and tighten the included cap screw and nut. For permanent connections and added strength, fittings have a 5/32" hole to drill in an additional screw (not included).
For technical drawings and 3-D models, click on a part number.
Swivel stem caster fits directly into the end of the rail.
Swivel plate caster clamps onto horizontal rails.
Strut Channel Feet
Provide a stable, nonmarring base for strut channel legs.
For technical drawings and 3-D models, click on a part number.
For Strut Channel Ht. | For Strut Channel Wd. | Dia. | Thick. | Material | Color | Insert Material | Capacity, lbs. | Each | |
1 5/8" | 1 5/8" | 3" | 1/2" | Rubber | Black | Steel | 200 | 000000 | 00000 |
Strut Channel Covers
Create a four-sided raceway for cable, or give a more finished look to strut channel structures.
Rubber covers cushion pipe and duct work to reduce vibration. They’re also flexible.
10 ft. | |||
---|---|---|---|
Material | For Strut Channel Wd. | Each | |
Flexible | |||
Black Rubber | 1 5/8" | 00000000 | 0000000 |
Strut-Mount Vibration-Damping Routing Clamps
Slide multiple clamps into existing strut channel to organize lines of pipe, tubing, and conduit without the need for drilling, welding, or using adhesive. Clamps have a plastic or rubber cushion or body to reduce vibration.
TPE clamps hold lines of pipe, tubing, and conduit in light duty applications without the need for fasteners or installation tools. Made from a single piece of rubber, they prevent corrosion caused by metal-to-metal contact and resist most oils, chemicals, and cleaning compounds. To install, insert the clamp into strut channel and twist it 90° to secure. Then, press material into the clamp.
For technical drawings and 3-D models, click on a part number.
ID | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric, mm | For Pipe Size | Capacity | Lg. | Wd. | Ht. | Center Ht. | Thick. | For Strut Channel Wd. | Temp. Range, °F | Each | |
TPE Rubber | ||||||||||||
1/4" | 6 | __ | 75 lbs. | 1 5/16" | 1 3/8" | 1 5/16" | 3/16" | 5/64" | 1 5/8" | -50° to 275° | 000000000 | 00000 |
3/8" | 10 | __ | 75 lbs. | 1 5/16" | 1 3/8" | 1 1/2" | 5/16" | 5/64" | 1 5/8" | -50° to 275° | 000000000 | 0000 |
1/2" | 13 | 1/8 | 75 lbs. | 1 1/2" | 1 3/8" | 1 13/16" | 7/16" | 3/32" | 1 5/8" | -50° to 275° | 000000000 | 0000 |
5/8" | 16 | 1/4 | 75 lbs. | 1 1/2" | 1 3/8" | 2" | 1/2" | 7/64" | 1 5/8" | -50° to 275° | 000000000 | 0000 |
3/4" | 18 | __ | 75 lbs. | 1 1/2" | 1 3/8" | 2 1/8" | 1/2" | 1/8" | 1 5/8" | -50° to 275° | 000000000 | 0000 |
3/4" | 19 | 3/8 | 75 lbs. | 1 1/2" | 1 3/8" | 2 1/8" | 9/16" | 9/64" | 1 5/8" | -50° to 275° | 000000000 | 0000 |
7/8" | 22 | 1/2 | 75 lbs. | 1 5/8" | 1 3/8" | 2 1/2" | 11/16" | 5/32" | 1 5/8" | -50° to 275° | 000000000 | 0000 |
15/16" | 23 | __ | 75 lbs. | 1 5/8" | 1 3/8" | 2 1/2" | 11/16" | 5/32" | 1 5/8" | -50° to 275° | 000000000 | 0000 |
1 1/8" | 29 | 3/4 | 75 lbs. | 1 15/16" | 1 3/8" | 2 7/8" | 13/16" | 3/16" | 1 5/8" | -50° to 275° | 000000000 | 0000 |
1 3/16" | 30 | __ | 75 lbs. | 1 15/16" | 1 3/8" | 3" | 13/16" | 3/16" | 1 5/8" | -50° to 275° | 000000000 | 0000 |
Stackable Vibration-Damping Threaded-Rod-Mount Clamping Hangers
Shown Connected | End Clamp |
Stacking Clamp |
Connect these hangers together to organize multiple lines of pipe, tubing, and conduit. They have a tight-fitting, santoprene body that reduces vibration and prevents corrosion caused by metal-to-metal contact. The smooth surface of the rubber prevents debris buildup and makes cleaning easy.
End clamps have a top plate with a threaded hole for mounting with threaded rod and a bottom plate with hardware for holding clamps together. You can attach a stacking clamp to the bottom of an end clamp.
Stacking clamps have stacking hardware and a plate for attaching to an end clamp or to other stacking clamps. They must be connected to an end clamp to mount.
Note: All hangers must be the same length and height. Do not exceed the capacity of the individual hanger in multiple hanger applications.
For technical drawings and 3-D models, click on a part number.
ID | Plate Material | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric, mm | For Pipe Size | For Thread Size | Color | Top | Bottom | Cap., lbs. | Lg. | Wd. | Ht | Temp. Range, °F | Includes | Specifications Met | Each | |
Santoprene Rubber | |||||||||||||||
End Clamp | |||||||||||||||
1/4" | 6 | __ | 3/8"-16 | Beige | 304 Stainless Steel | 304 Stainless Steel | 350 | 1 15/16" | 1 1/4" | 1 7/16" | -40° to 270° | __ | DIN 3015-1 | 0000000 | 000000 |
1/2" | 13 | 1/8 | 3/8"-16 | Beige | 304 Stainless Steel | 304 Stainless Steel | 350 | 1 15/16" | 1 1/4" | 1 7/16" | -40° to 270° | __ | DIN 3015-1 | 0000000 | 00000 |
3/4" | 19 | 3/8 | 3/8"-16 | Beige | 304 Stainless Steel | 304 Stainless Steel | 350 | 1 15/16" | 1 1/4" | 1 7/16" | -40° to 270° | __ | DIN 3015-1 | 0000000 | 00000 |
1" | 25 | __ | 3/8"-16 | Beige | 304 Stainless Steel | 304 Stainless Steel | 350 | 1 15/16" | 1 1/4" | 1 7/16" | -40° to 270° | __ | DIN 3015-1 | 0000000 | 00000 |
1" | 25 | __ | 3/8"-16 | Beige | 304 Stainless Steel | 304 Stainless Steel | 350 | 3 3/8" | 1 1/4" | 2 11/16" | -40° to 270° | __ | DIN 3015-1 | 0000000 | 00000 |
1 1/2" | 38 | __ | 3/8"-16 | Beige | 304 Stainless Steel | 304 Stainless Steel | 350 | 3 3/8" | 1 1/4" | 2 11/16" | -40° to 270° | __ | DIN 3015-1 | 0000000 | 00000 |
2" | 51 | 1 1/2 | 3/8"-16 | Beige | 304 Stainless Steel | 304 Stainless Steel | 350 | 3 3/8" | 1 1/4" | 2 11/16" | -40° to 270° | __ | DIN 3015-1 | 0000000 | 00000 |
2" | 51 | 1 1/2 | 3/8"-16 | Beige | 304 Stainless Steel | 304 Stainless Steel | 350 | 5" | 1 1/4" | 4 7/16" | -40° to 270° | __ | DIN 3015-1 | 0000000 | 00000 |
2 1/2" | 64 | 2 | 3/8"-16 | Beige | 304 Stainless Steel | 304 Stainless Steel | 350 | 5" | 1 1/4" | 4 7/16" | -40° to 270° | __ | DIN 3015-1 | 0000000 | 00000 |
3" | 76 | 2 1/2 | 3/8"-16 | Beige | 304 Stainless Steel | 304 Stainless Steel | 350 | 5" | 1 1/4" | 4 7/16" | -40° to 270° | __ | DIN 3015-1 | 0000000 | 00000 |
3 1/2" | 89 | 3 | 3/8"-16 | Beige | 304 Stainless Steel | 304 Stainless Steel | 350 | 5" | 1 1/4" | 4 7/16" | -40° to 270° | __ | DIN 3015-1 | 0000000 | 00000 |
Stacking Clamp | |||||||||||||||
1/4" | 6 | __ | __ | Beige | __ | __ | 350 | 1 15/16" | 1 1/4" | 1 7/16" | -40° to 270° | Stacking Hardware and Plate | DIN 3015-1 | 0000000 | 00000 |
1/2" | 13 | 1/8 | __ | Beige | __ | __ | 350 | 1 15/16" | 1 1/4" | 1 7/16" | -40° to 270° | Stacking Hardware and Plate | DIN 3015-1 | 0000000 | 00000 |
3/4" | 19 | 3/8 | __ | Beige | __ | __ | 350 | 1 15/16" | 1 1/4" | 1 7/16" | -40° to 270° | Stacking Hardware and Plate | DIN 3015-1 | 0000000 | 00000 |
1" | 25 | __ | __ | Beige | __ | __ | 350 | 1 15/16" | 1 1/4" | 1 7/16" | -40° to 270° | Stacking Hardware and Plate | DIN 3015-1 | 0000000 | 00000 |
1" | 25 | __ | __ | Beige | __ | __ | 350 | 3 3/8" | 1 1/4" | 2 11/16" | -40° to 270° | Stacking Hardware and Plate | DIN 3015-1 | 0000000 | 00000 |
1 1/2" | 38 | __ | __ | Beige | __ | __ | 350 | 3 3/8" | 1 1/4" | 2 11/16" | -40° to 270° | Stacking Hardware and Plate | DIN 3015-1 | 0000000 | 00000 |
2" | 51 | 1 1/2 | __ | Beige | __ | __ | 350 | 3 3/8" | 1 1/4" | 2 11/16" | -40° to 270° | Stacking Hardware and Plate | DIN 3015-1 | 0000000 | 00000 |
2" | 51 | 1 1/2 | __ | Beige | __ | __ | 350 | 5" | 1 1/4" | 4 7/16" | -40° to 270° | Stacking Hardware and Plate | DIN 3015-1 | 0000000 | 00000 |
2 1/2" | 64 | 2 | __ | Beige | __ | __ | 350 | 5" | 1 1/4" | 4 7/16" | -40° to 270° | Stacking Hardware and Plate | DIN 3015-1 | 0000000 | 00000 |
3" | 76 | 2 1/2 | __ | Beige | __ | __ | 350 | 5" | 1 1/4" | 4 7/16" | -40° to 270° | Stacking Hardware and Plate | DIN 3015-1 | 0000000 | 00000 |
3 1/2" | 89 | 3 | __ | Beige | __ | __ | 350 | 5" | 1 1/4" | 4 7/16" | -40° to 270° | Stacking Hardware and Plate | DIN 3015-1 | 0000000 | 00000 |