Use hinges to add doors, lids, and machine guards to T-slotted framing.

Made of 316 stainless steel, this framing has excellent resistance to chemicals and salt water.

Half the height and the same width as regular strut channel, this low-profile strut channel fits into tight spots and is compatible with many of the same brackets.

Securely fasten strut channel to the floor.

A spring plus serrated grooves that grip the lip of the channel provide a more secure hold than standard strut channel nuts.

Quickly attach these nuts by twisting them closed at any point along a threaded rod.

Use with hex nuts to connect threaded rod.

Position two strut channels at a 30° to 60° angle, then tighten the bolt to secure.

Support the corners of strut channel structures.

Build test fixtures, prototypes, and other small structures with this miniature version of T-slotted framing and fittings.

Close off openings in structures while allowing air to pass through.

Machine holes and slots or weld in place.

Machine holes and slots or weld in place.

Machine holes and slots or weld in place.

Often used in washrooms, these brackets mount panels and partitions.

Polished to either a brushed or mirror-like finish, this material is often used to fabricate decorative enclosures and industrial workstations.

With a diameter that’s held to a close tolerance, this material is hardened for increased wear and abrasion resistance.

Slide multiple clamps into existing strut channel to organize lines of pipe, tubing, and conduit without the need for drilling, welding, or using adhesive. Clamps have a plastic or rubber cushion or body to reduce vibration.

Use these plates where full lengths of track won't fit to create one anchor point.

18-8 stainless steel screws have good chemical resistance.

18-8 stainless steel screws have good chemical resistance.

18-8 stainless steel screws have good chemical resistance.

Threads change direction to cut into composites and push material back into the hole to prevent distorting the surface around the hole.

Also known as Type 17 auger point screws, these penetrate hardwood and reduce driving torque. They require a pilot hole to prevent splitting when used near an edge.

Also known as spiral-shank nails, the shank turns as you drive, so these nails provide a strong hold in hard woods such as birch, oak, and maple.

These nails are commonly used for framing and other structural applications.