Shape Shape |
|---|
 |  |
| Sheet and Bar | Rod and Disc |
 | |
| Hex Bar |
Width Width |
|---|
Thickness Thickness |
|---|
|
|
|
Diameter Diameter |
|---|
Certificate Certificate |
|---|
 | |
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
Yield Strength Yield Strength |
|---|
|
Density Density |
|---|
|
Modulus of Elasticity Modulus of Elasticity |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
About Copper, Brass, and Bronze
More
Ultra-Machinable 360 Brass Bars
- Yield Strength: 15,000 psi
- Hardness: Rockwell B35 (Soft)
- Temper: H02 (1/2 Hard)
- Heat Treatable: No
- Specifications Met: ASTM B16
With the highest lead content of all the brass alloys, 360 offers the best machinability. Often called free-machining and free-cutting brass, it stands up to high-speed drilling, milling, and tapping operations with minimal wear on your tools. It’s commonly used for gears, pinions, and lock components.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Wd. | 1/2 ft. Lg. | 1 ft. Lg. | 2 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
1/8" Thick. (-0.009" to 0.009" Tolerance) | ||||||
|---|---|---|---|---|---|---|
| 1/8" | 0000000 | |||||
| 1/4" | 0000000 | |||||
| 3/8" | 0000000 | |||||
| 1/2" | 0000000 | |||||
| 5/8" | 000000 | |||||
| 3/4" | 000000 | |||||
| 1" | 0000000 | |||||
| 1 1/4" | 00000000 | |||||
| 1 1/2" | 00000000 | |||||
| 1 3/4" | 0000000 | |||||
| 2" | 00000000 | |||||
| 2 1/2" | 00000000 | |||||
| 3" | 00000000 | |||||
| 4" | 00000000 | |||||
5/32" Thick. (-0.009" to 0.009" Tolerance) | ||||||
| 5/32" | 0000000 | |||||
3/16" Thick. (-0.009" to 0.009" Tolerance) | ||||||
| 3/16" | 0000000 | |||||
| 1/4" | 000000 | |||||
| 3/8" | 000000 | |||||
| 1/2" | 000000 | |||||
| 5/8" | 000000 | |||||
| 3/4" | 00000000 | |||||
| 7/8" | 0000000 | |||||
| 1" | 00000000 | |||||
| 1 1/4" | 00000000 | |||||
| 1 1/2" | 00000000 | |||||
| 2" | 00000000 | |||||
| 2 1/2" | 00000000 | |||||
| 3" | 00000000 | |||||
| 4" | 00000000 | |||||
1/4" Thick. (-0.009" to 0.009" Tolerance) | ||||||
| 1/4" | 0000000 | |||||
| 5/16" | 000000 | |||||
| 3/8" | 00000000 | |||||
| 1/2" | 00000000 | |||||
| 5/8" | 00000000 | |||||
| 3/4" | 00000000 | |||||
| 1" | 00000000 | |||||
| 1 1/4" | 00000000 | |||||
| 1 1/2" | 00000000 | |||||
| 1 3/4" | 0000000 | |||||
| 2" | 00000000 | |||||
| 2 1/4" | 0000000 | |||||
| 2 1/2" | 00000000 | |||||
| 3" | 00000000 | |||||
| 4" | 00000000 | |||||
5/16" Thick. (-0.009" to 0.009" Tolerance) | ||||||
| 5/16" | 0000000 | |||||
| 3/8" | 0000000 | |||||
| 1/2" | 00000000 | |||||
| 5/8" | 00000000 | |||||
| 3/4" | 00000000 | |||||
| 1" | 00000000 | |||||
| 1 1/2" | 00000000 | |||||
| 2" | 00000000 | |||||
3/8" Thick. (-0.009" to 0.009" Tolerance) | ||||||
| 3/8" | 0000000 | |||||
| 1/2" | 00000000 | |||||
| 5/8" | 00000000 | |||||
| 3/4" | 00000000 | |||||
| 7/8" | 0000000 | |||||
| 1" | 00000000 | |||||
| 1 1/4" | 00000000 | |||||
| 1 1/2" | 00000000 | |||||
| 1 3/4" | 0000000 | |||||
| 2" | 00000000 | |||||
| 2 1/2" | 00000000 | |||||
| 3" | 00000000 | |||||
| 4" | 00000000 | |||||
| 6" | 0000000 | |||||
7/16" Thick. (-0.009" to 0.009" Tolerance) | ||||||
| 7/16" | 0000000 | |||||
1/2" Thick. (-0.009" to 0.009" Tolerance) | ||||||
| 1/2" | 0000000 | |||||
| 5/8" | 00000000 | |||||
| 3/4" | 00000000 | |||||
| 7/8" | 000000 | |||||
| 1" | 00000000 | |||||
| 1 1/4" | 00000000 | |||||
| 1 1/2" | 00000000 | |||||
| 1 3/4" | 0000000 | |||||
| 2" | 00000000 | |||||
| 2 1/2" | 00000000 | |||||
| 3" | 00000000 | |||||
| 3 1/2" | 0000000 | |||||
| 4" | 00000000 | |||||
| 5" | 0000000 | |||||
| 6" | 0000000 | |||||
9/16" Thick. (-0.009" to 0.009" Tolerance) | ||||||
| 9/16" | 0000000 | |||||
5/8" Thick. (-0.009" to 0.009" Tolerance) | ||||||
| 5/8" | 0000000 | |||||
| 3/4" | 00000000 | |||||
| 7/8" | 00000000 | |||||
| 1" | 00000000 | |||||
| 1 1/4" | 00000000 | |||||
| 1 1/2" | 00000000 | |||||
| 1 3/4" | 00000000 | |||||
| 2" | 00000000 | |||||
| 2 1/2" | 00000000 | |||||
| 3" | 00000000 | |||||
| 4" | 00000000 | |||||
3/4" Thick. (-0.009" to 0.009" Tolerance) | ||||||
| 3/4" | 0000000 | |||||
| 7/8" | 00000000 | |||||
| 1" | 00000000 | |||||
| 1 1/4" | 0000000 | |||||
| 1 1/2" | 00000000 | |||||
| 1 3/4" | 00000000 | |||||
| 2" | 00000000 | |||||
| 2 1/2" | 00000000 | |||||
| 3" | 00000000 | |||||
| 4" | 00000000 | |||||
7/8" Thick. (-0.009" to 0.009" Tolerance) | ||||||
| 1 1/2" | 00000000 | |||||
| 2" | 00000000 | |||||
1" Thick. (-0.014" to 0.014" Tolerance) | ||||||
| 1" | 0000000 | |||||
| 1 1/4" | 00000000 | |||||
| 1 1/2" | 00000000 | |||||
| 1 3/4" | 00000000 | |||||
| 2" | 00000000 | |||||
| 2 1/2" | 00000000 | |||||
| 3" | 00000000 | |||||
| 3 1/2" | 00000000 | |||||
| 4" | 00000000 | |||||
| 5" | 00000000 | |||||
| 6" | 00000000 | |||||
1 1/4" Thick. (-0.014" to 0.014" Tolerance) | ||||||
| 1 1/4" | 0000000 | |||||
| 1 1/2" | 00000000 | |||||
| 1 3/4" | 00000000 | |||||
| 2" | 00000000 | |||||
| 2 1/2" | 00000000 | |||||
| 3" | 00000000 | |||||
| 4" | 00000000 | |||||
1 3/8" Thick. (-0.014" to 0.014" Tolerance) | ||||||
| 1 3/4" | 00000000 | |||||
1 1/2" Thick. (-0.014" to 0.014" Tolerance) | ||||||
| 1 1/2" | 0000000 | |||||
| 2" | 00000000 | |||||
| 2 1/2" | 0000000 | |||||
| 3" | 00000000 | |||||
| 4" | 00000000 | |||||
1 3/4" Thick. (-0.014" to 0.014" Tolerance) | ||||||
| 1 3/4" | 0000000 | |||||
| 2" | 00000000 | |||||
| 2 1/2" | 00000000 | |||||
| 3" | 00000000 | |||||
2" Thick. (-0.014" to 0.014" Tolerance) | ||||||
| 2" | 0000000 | |||||
| 2 1/2" | 00000000 | |||||
| 3" | 00000000 | |||||
| 4" | 00000000 | |||||
2 1/4" Thick. (-0.014" to 0.014" Tolerance) | ||||||
| 2 1/4" | 0000000 | |||||
2 1/2" Thick. (-0.014" to 0.014" Tolerance) | ||||||
| 2 1/2" | 0000000 | |||||
| 3 1/2" | 00000000 | |||||
3" Thick. (-0.014" to 0.014" Tolerance) | ||||||
| 3" | 0000000 | |||||
Ultra-Machinable 360 Brass Rods and Discs
- Yield Strength:
Inch sizes: 15,000 psi
Metric sizes: 23,000 psi - Hardness: See table
- Temper:
Inch sizes: H02 (1/2 Hard)
Metric sizes: 1/2 Hard - Heat Treatable: No
- Specifications Met:
Inch sizes: ASTM B16
Metric sizes: European Standard EN 12164
With the highest lead content of all the brass alloys, 360 offers the best machinability. Often called free-machining and free-cutting brass, it stands up to high-speed drilling, milling, and tapping operations with minimal wear on your tools. It’s commonly used for gears, pinions, and lock components.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Dia. | Dia. Tolerance Range | Hardness | 1/2 ft. Lg. | 1 ft. Lg. | 2 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
| 3/32" | -0.003" to 0.003" | Not Rated | 00000000 | |||||
| 1/8" | -0.003" to 0.003" | Not Rated | 00000000 | |||||
| 5/32" | -0.003" to 0.003" | Not Rated | 00000000 | |||||
| 3/16" | -0.003" to 0.003" | Not Rated | 00000000 | |||||
| 7/32" | -0.003" to 0.003" | Not Rated | 00000000 | |||||
| 1/4" | -0.003" to 0.003" | Not Rated | 00000000 | |||||
| 9/32" | -0.003" to 0.003" | Not Rated | 00000000 | |||||
| 5/16" | -0.003" to 0.003" | Not Rated | 00000000 | |||||
| 11/32" | -0.003" to 0.003" | Not Rated | 00000000 | |||||
| 3/8" | -0.003" to 0.003" | Not Rated | 00000000 | |||||
| 13/32" | -0.003" to 0.003" | Not Rated | 00000000 | |||||
| 7/16" | -0.003" to 0.003" | Not Rated | 00000000 | |||||
| 15/32" | -0.003" to 0.003" | Not Rated | 00000000 | |||||
| 1/2" | -0.003" to 0.003" | Rockwell B25 (Soft) | 00000000 | |||||
| 17/32" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 9/16" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 19/32" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 5/8" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 21/32" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 11/16" | -0.003" to 0.003" | Rockwell B25 (Soft) | 000000 | |||||
| 23/32" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 3/4" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 25/32" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 13/16" | -0.003" to 0.003" | Rockwell B25 (Soft) | 000000 | |||||
| 7/8" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 15/16" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 1" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 1 1/16" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 1 1/8" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 1 3/16" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 1 1/4" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 1 5/16" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 1 3/8" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 1 7/16" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 1 1/2" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 1 9/16" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 1 5/8" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 1 3/4" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 1 7/8" | -0.003" to 0.003" | Rockwell B25 (Soft) | 000000 | |||||
| 2" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 2 1/16" | -0.003" to 0.003" | Rockwell B25 (Soft) | 000000 | |||||
| 2 1/8" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 2 1/4" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | |||||
| 2 3/8" | -0.006" to 0.006" | Rockwell B25 (Soft) | 0000000 | |||||
| 2 1/2" | -0.006" to 0.006" | Rockwell B25 (Soft) | 0000000 | |||||
| 2 5/8" | -0.006" to 0.006" | Rockwell B25 (Soft) | 0000000 | |||||
| 2 3/4" | -0.006" to 0.006" | Rockwell B25 (Soft) | 0000000 | |||||
| 3" | -0.006" to 0.006" | Rockwell B25 (Soft) | 00000000 | |||||
| 3 1/8" | -0.006" to 0.006" | Rockwell B25 (Soft) | 00000000 | |||||
| 3 1/4" | -0.006" to 0.006" | Rockwell B25 (Soft) | 00000000 | |||||
| 3 3/8" | -0.006" to 0.006" | Rockwell B25 (Soft) | 00000000 | |||||
| 3 1/2" | -0.006" to 0.006" | Rockwell B25 (Soft) | 00000000 | |||||
| 3 3/4" | -0.006" to 0.006" | Rockwell B25 (Soft) | 00000000 | |||||
| 4" | -0.006" to 0.006" | Rockwell B25 (Soft) | 00000000 | |||||
| 4 1/4" | -0.12" to 0.12" | Rockwell B25 (Soft) | 00000000 | |||||
| 4 1/2" | -0.12" to 0.12" | Rockwell B25 (Soft) | 00000000 | |||||
| 5" | -0.12" to 0.12" | Rockwell B25 (Soft) | 00000000 | |||||
| 6" | -0.12" to 0.12" | Rockwell B25 (Soft) | 00000000 |
| Dia. | Dia. Tolerance Range | Hardness | 1/2" Lg. | 1" Lg. | 2" Lg. | 3" Lg. | |
| 1" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | ||||
| 1 1/2" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | ||||
| 2" | -0.003" to 0.003" | Rockwell B25 (Soft) | 0000000 | ||||
| 2 1/2" | -0.006" to 0.006" | Rockwell B25 (Soft) | 0000000 | ||||
| 3" | -0.006" to 0.006" | Rockwell B25 (Soft) | 0000000 | ||||
| 4" | -0.006" to 0.006" | Rockwell B25 (Soft) | 0000000 | ||||
| 5" | -0.12" to 0.12" | Rockwell B25 (Soft) | 0000000 | ||||
| 6" | -0.12" to 0.12" | Rockwell B25 (Soft) | 0000000 |
1 m Lg. | ||||
|---|---|---|---|---|
| Dia., mm | Dia. Tolerance Range, mm | Hardness | Each | |
| 2 | -0.05 to 0.05 | Rockwell B75 (Medium) | 0000000 | 00000 |
| 3 | -0.05 to 0.05 | Rockwell B75 (Medium) | 0000000 | 0000 |
| 4 | -0.05 to 0.05 | Rockwell B75 (Medium) | 0000000 | 00000 |
| 5 | -0.05 to 0.05 | Rockwell B75 (Medium) | 0000000 | 00000 |
| 6 | -0.08 to 0.08 | Rockwell B75 (Medium) | 0000000 | 00000 |
| 7 | -0.08 to 0.08 | Rockwell B75 (Medium) | 0000000 | 00000 |
| 8 | -0.08 to 0.08 | Rockwell B75 (Medium) | 0000000 | 00000 |
| 9 | -0.08 to 0.08 | Rockwell B75 (Medium) | 0000000 | 00000 |
| 10 | -0.08 to 0.08 | Rockwell B75 (Medium) | 0000000 | 00000 |
| 12 | -0.08 to 0.08 | Rockwell B75 (Medium) | 0000000 | 00000 |
| 14 | -0.08 to 0.08 | Rockwell B75 (Medium) | 0000000 | 00000 |
| 15 | -0.08 to 0.08 | Rockwell B75 (Medium) | 0000000 | 00000 |
| 16 | -0.08 to 0.08 | Rockwell B75 (Medium) | 0000000 | 000000 |
| 18 | -0.08 to 0.08 | Rockwell B75 (Medium) | 0000000 | 000000 |
| 20 | -0.08 to 0.08 | Rockwell B75 (Medium) | 0000000 | 000000 |
| 25 | -0.08 to 0.08 | Rockwell B75 (Medium) | 0000000 | 000000 |
Tight-Tolerance Ultra-Machinable 360 Brass Rods
- Yield Strength: 25,000 psi
- Hardness: Rockwell B60 (Soft)
- Temper: H02 (1/2 Hard)
- Heat Treatable: No
- Specifications Met: ASTM B16
The diameter of these rods is held to a ±0.0002" tolerance. With the highest lead content of all the brass alloys, 360 offers the best machinability. Often called free-machining and free-cutting brass, it stands up to high-speed drilling, milling, and tapping operations with minimal wear on your tools. It’s commonly used for gears, pinions, and lock components.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Dia. | Dia. Tolerance Range | Mechanical Finish | Straightness Tolerance | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
| 1/8" | -0.0002" to 0.0002" | Precision Ground | 1/16" per 5 ft. | 000000 | |||
| 3/16" | -0.0002" to 0.0002" | Precision Ground | 1/16" per 5 ft. | 000000 | |||
| 1/4" | -0.0002" to 0.0002" | Precision Ground | 1/16" per 5 ft. | 000000 | |||
| 5/16" | -0.0002" to 0.0002" | Precision Ground | 1/16" per 5 ft. | 000000 | |||
| 3/8" | -0.0002" to 0.0002" | Precision Ground | 1/16" per 5 ft. | 000000 | |||
| 1/2" | -0.0002" to 0.0002" | Precision Ground | 1/16" per 5 ft. | 000000 | |||
| 5/8" | -0.0002" to 0.0002" | Precision Ground | 1/16" per 5 ft. | 000000 | |||
| 3/4" | -0.0002" to 0.0002" | Precision Ground | 1/16" per 5 ft. | 000000 | |||
| 7/8" | -0.0002" to 0.0002" | Precision Ground | 1/16" per 5 ft. | 000000 | |||
| 1" | -0.0002" to 0.0002" | Precision Ground | 1/16" per 5 ft. | 0000000 |
Ultra-Machinable 360 Brass Hex Bars
- Yield Strength:
Inch sizes: 25,000 psi
Metric size: 23,000 psi - Hardness:
Inch sizes: Rockwell B55-B80 (Medium)
Metric sizes: Rockwell B75 (Medium) - Temper:
Inch sizes: H02 (1/2 Hard)
Metric sizes: 1/2 Hard - Heat Treatable: No
- Specifications Met:
Inch sizes: ASTM B16
Metric sizes: European Standard EN 12164
With the highest lead content of all the brass alloys, 360 offers the best machinability. Often called free-machining and free-cutting brass, it stands up to high-speed drilling, milling, and tapping operations with minimal wear on your tools. It’s commonly used for gears, pinions, and lock components.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
| Wd. | Wd. Tolerance | 1/2 ft. Lg. | 1 ft. Lg. | 2 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
| 1/8" | -0.006" to 0.006" | 0000000 | |||||
| 3/16" | -0.006" to 0.006" | 0000000 | |||||
| 1/4" | -0.006" to 0.006" | 0000000 | |||||
| 5/16" | -0.006" to 0.006" | 0000000 | |||||
| 3/8" | -0.006" to 0.006" | 0000000 | |||||
| 7/16" | -0.006" to 0.006" | 0000000 | |||||
| 1/2" | -0.006" to 0.006" | 0000000 | |||||
| 9/16" | -0.006" to 0.006" | 0000000 | |||||
| 5/8" | -0.006" to 0.006" | 0000000 | |||||
| 11/16" | -0.006" to 0.006" | 0000000 | |||||
| 3/4" | -0.006" to 0.006" | 0000000 | |||||
| 13/16" | -0.006" to 0.006" | 0000000 | |||||
| 7/8" | -0.006" to 0.006" | 0000000 | |||||
| 15/16" | -0.006" to 0.006" | 0000000 | |||||
| 1" | -0.006" to 0.006" | 0000000 | |||||
| 1 1/8" | -0.006" to 0.006" | 0000000 | |||||
| 1 1/4" | -0.006" to 0.006" | 0000000 | |||||
| 1 3/8" | -0.009" to 0.009" | 0000000 | |||||
| 1 1/2" | -0.009" to 0.009" | 0000000 | |||||
| 1 5/8" | -0.009" to 0.009" | 0000000 | |||||
| 1 3/4" | -0.009" to 0.009" | 0000000 | |||||
| 2" | -0.009" to 0.009" | 0000000 | |||||
| 2 1/4" | -0.009" to 0.009" | 0000000 | |||||
| 2 1/2" | -0.009" to 0.009" | 0000000 |
1 m Lg. | |||
|---|---|---|---|
| Wd., mm | Wd. Tolerance, mm | Each | |
| 4 | -0.09 to 0.09 | 0000000 | 000000 |
| 5 | -0.09 to 0.09 | 0000000 | 00000 |
| 6 | -0.09 to 0.09 | 0000000 | 00000 |
| 7 | -0.09 to 0.09 | 0000000 | 00000 |
| 8 | -0.09 to 0.09 | 0000000 | 00000 |
| 10 | -0.11 to 0.11 | 0000000 | 00000 |
| 12 | -0.11 to 0.11 | 0000000 | 00000 |
| 14 | -0.11 to 0.11 | 0000000 | 000000 |
| 17 | -0.11 to 0.11 | 0000000 | 000000 |
| 19 | -0.13 to 0.13 | 0000000 | 000000 |
| 22 | -0.13 to 0.13 | 0000000 | 000000 |
| 24 | -0.13 to 0.13 | 0000000 | 000000 |
Formable Easy-to-Machine 353 Brass Sheets and Bars
353 brass is more formable than 385 brass while maintaining good machinability. Commonly called engraver’s brass, it’s well suited for fabrication processes such as knurling and threading. Use it to make nuts, gears, drawer pulls, and hinges.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.