An adjustable thermostat senses the container’s surface temperature to automatically control heat output.

For more durability than other adhesive-mount heaters, a thick layer of fiberglass-reinforced silicone rubber encases the heating element.

FM approved, these heat sheets are safe for use in areas with infrequent exposure, such as from a spill or a ventilation system failure, to flammable gases, liquids, and dust.

For applications requiring high heat over long periods of time, these aluminized steel heaters warm up faster and are more durable than silicone rubber heaters.

Also known as heat blankets, these heaters completely surround containers for fast heating and increased heat retention in unheated and drafty areas.

Extend the shelf life of your diesel exhaust fluid (DEF) while storing it in cold places.

To prevent hot spots that can damage heat-sensitive materials such as adhesives, sealants, and food, these heaters warm the air around containers without touching them.

Attach to flat metal surfaces.

Turn the dial to control the percentage of time that these heaters cycle on, from 5% to 100%. Commonly used to thaw pipes, prevent valves from freezing, and heat beakers and flasks in labs, they're good for temporary and occasional use where rapid heating is required but precise temperature control is not.

Rated for a maximum heat output of 900° F, these heaters are often used for thawing frozen pipes and rapid spot heating.

With a cable that supplies the same wattage along the entire length, these heaters remain consistent regardless of the surrounding temperature. All require a temperature switch or controller to regulate heat output.

Keep liquid in your pipes from freezing, maintain a specific viscosity, and prevent condensation in cold areas.

For demanding applications such as hot-melt transfer pipes, these heaters have a maximum heat output of 1400° F.

These heaters have a large surface area to quickly dissipate heat in air and inert gas heating systems used in ducts, ovens, and dryers.

Form these heaters into any shape and install them through container walls with the attached bulkhead fittings.

Keep your battery running at full power even when the temperature drops—these heaters warm batteries quickly without overheating them.

Thaw pipe without direct access to or knowing exactly where the frozen section is.

Use where flammable gases, vapors, and dust are present—these heaters meet NEC Class I, Divisions 1 and 2, Groups C and D; and Class II, Divisions 1 and 2, Groups E, F, and G.

Roll to heat large areas such as shops, garages, and warehouses.

Roll these powerful space heaters to where you need heat for big jobs.

Built for big jobs, this is a powerful space heater. It uses kerosene and diesel.

Focus warm air in a specific spot.

Evenly warm a large space with steam and water from your existing boilers.

Focus warm air in a specific spot.

Also known as toe kick or kick space heaters, these heaters are designed to recess mount under counters and cabinets.

Use where flammable gases and vapors are present—these heaters meet NEC Class I, Divisions 1 and 2, Groups C and D.

Radiate heat inside narrow spaces to keep equipment warm and dry.

Under 2 ½” long, these tiny heaters fit in tight spaces, such as security camera enclosures. For localized heat in a large enclosure, place them near batteries and other parts that don’t work well in the cold.

Screw these heaters into a light socket in lockers, cabinets, and enclosures.

Stay warm at a desk, counter, or table.

Eliminate cold spots without taking up space. Slip these heaters into your drop-ceiling grid above windows and doorways to complement your existing heating system.

Roll these heaters to warm people at large worksites.

Our most powerful ceiling mount direct heaters, these warm people in large spaces, such as warehouses.

Use these powerful heaters to warm people in large spaces, such as warehouses.