Material Material |
|---|
|
Finish Finish |
|---|
|
Push-to-Close Latch Type Push-to-Close Latch Type |
|---|
|
Mounting Style Mounting Style |
|---|
|
Projection Projection |
|---|
|
|
|
For Door Offset For Door Offset |
|---|
Door Mounting Location Door Mounting Location |
|---|
|
Emergency Release Handle Material Emergency ReleaseHandle Material |
|---|
|
Emergency Release Rod Material Emergency ReleaseRod Material |
|---|
|
Swinging Latch Type Swinging Latch Type |
|---|
|
Maximum Pressure Release Force Maximum PressureRelease Force |
|---|
|
Minimum Pressure Release Force Minimum PressureRelease Force |
|---|
|
About Push-to-Close Latches
More
Padlockable Push-to-Close Latches
with Emergency Release Handle
An emergency release handle offers a means of escape if a door closes with someone inside an enclosure. Mount these padlockable latches horizontally to the face of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted on the frame.
Latches have an adjustable strike plate to compensate for changes in offset caused by sagging doors and worn or flattened gaskets. Door offset is the space between the door face and the frame when the door is closed.
For technical drawings and 3-D models, click on a part number.
Mounting Hole Ctr.-to-Ctr. | Strike Plate Mounting Hole Ctr.-to-Ctr. | Emergency Release | Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Door Offset | Lg. | Projection | For Max. Padlock Shackle Dia. | (A) | (B) | (C) | (D) | (E) | (F) | Handle Material | Rod Material | Fasteners Included | Screw Size | Each | ||
Chrome-Plated Zinc—Polished | ||||||||||||||||
| 1 | 0" to 3/16" | 11 3/4" | 4" | 5/16" | 3 5/16" | 2 7/8" | 3 3/8" | 1 1/4" | 3 1/4" | 3 1/4" | Steel | Steel | No | 1/4" | 000000 | 0000000 |
| 1 | 1 3/8" to 1 7/8" | 11 3/4" | 4" | 5/16" | 3 5/16" | 2 7/8" | 3 3/8" | 1 1/4" | 3 1/4" | 3 1/4" | Steel | Steel | No | 1/4" | 000000 | 000000 |
Gray Painted Iron | ||||||||||||||||
| 2 | 0" to 1/2" | 8" | 3 1/2" | 5/16" | 1 3/4" | 2 3/8" | 2 3/8" | 1 3/16" | 2 7/16" | __ | Iron | Steel | No | 1/4" | 0000000 | 00000 |
| 2 | 0" to 11/16" | 10 5/8" | 4 1/8" | 11/32" | 1 15/16" | 3" | 3" | 1 1/2" | 3 1/8" | __ | Iron | Steel | No | No. 10 | 0000000 | 000000 |
| 2 | 5/8" to 1 1/4" | 8" | 3 1/2" | 5/16" | 1 3/4" | 2 3/8" | 2 3/8" | 1 3/16" | 2 7/16" | __ | Iron | Steel | No | 1/4" | 0000000 | 00000 |
| 2 | 11/16" to 1 1/2" | 10 5/8" | 4 1/8" | 11/32" | 1 15/16" | 3" | 3" | 1 1/2" | 3 1/8" | __ | Iron | Steel | No | No. 10 | 0000000 | 000000 |
304 Stainless Steel—Polished | ||||||||||||||||
| 2 | 0" to 1/2" | 8" | 3 1/2" | 5/16" | 1 3/4" | 2 3/8" | 2 3/8" | 1 3/16" | 2 7/16" | __ | Stainless Steel | Stainless Steel | No | 1/4" | 0000000 | 000000 |
| 2 | 5/8" to 1 1/4" | 8" | 3 1/2" | 5/16" | 1 3/4" | 2 3/8" | 2 3/8" | 1 3/16" | 2 7/16" | __ | Stainless Steel | Stainless Steel | No | 1/4" | 0000000 | 000000 |
| Replacement Steel Handle | 000000 | Each | 000000 |
Padlockable Push-to-Close Latches with Handle
Mount these padlockable latches horizontally to the face of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted on the frame. Latches have an adjustable strike plate to compensate for changes in offset caused by sagging doors and worn or flattened gaskets. Door offset is the space between the door face and the frame when the door is closed.
For technical drawings and 3-D models, click on a part number.
Mounting Hole Ctr.-to-Ctr. | Strike Plate Mounting Hole Ctr.-to-Ctr. | Mounting | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Door Offset | Lg. | Projection | (A) | (B) | (C) | (D) | (E) | (F) | For Max. Padlock Shackle Dia. | Fasteners Included | Screw Size | Each | ||
Chrome-Plated Zinc—Polished | ||||||||||||||
| 1 | 0" to 3/8" | 5 15/16" | 2 1/16" | 13/16" | 1 3/8" | 1 1/2" | 1/2" | 1 1/2" | __ | 1/4" | No | No. 8 | 000000 | 0000000 |
| 1 | 3/4" to 1 1/4" | 5 15/16" | 2 1/16" | 13/16" | 1 3/8" | 1 1/2" | 7/8" | 1 1/2" | __ | 1/4" | No | No. 8 | 000000 | 000000 |
304 Stainless Steel—Polished | ||||||||||||||
| 1 | 0" to 5/16" | 5 1/4" | 2" | 13/16" | 1 5/16" | 1 1/2" | 7/8" | 1 1/2" | __ | 1/4" | No | No. 8 | 000000 | 00000 |
| 1 | 5/8" to 1 1/4" | 5 1/4" | 2" | 13/16" | 1 5/16" | 1 1/2" | 7/8" | 1 1/2" | __ | 1/4" | No | No. 8 | 000000 | 00000 |
| 2 | 0" to 3/8" | 5 1/4" | 2 5/16" | 1 1/4" | 1 3/4" | 2 1/16" | 3/4" | 2 1/16" | 2 1/16" | 1/4" | No | No. 10 | 000000 | 000000 |
| 2 | 0" to 1/2" | 4 1/4" | 2 1/2" | 1 3/8" | 1 1/8" | 1 5/8" | 5/8" | 1 5/8" | 1 5/8" | 1/4" | No | No. 8 | 000000 | 000000 |
| 2 | 1/2" to 1 1/4" | 5 1/4" | 2 5/16" | 1 1/4" | 1 3/4" | 2 1/16" | 3/4" | 2 1/16" | 2 1/16" | 1/4" | No | No. 10 | 000000 | 000000 |
| 2 | 9/16" to 1 1/4" | 4 1/4" | 2 1/2" | 1 3/8" | 1 1/8" | 1 5/8" | 5/8" | 1 5/8" | 1 5/8" | 1/4" | No | No. 8 | 000000 | 000000 |
Edge-Mount Padlockable
Push-to-Close Latches with Handle
Attach this padlockable latch vertically to the side edge of doors on refrigerators, ovens, and industrial enclosures with the strike plate mounted behind it on the frame. Latch has an adjustable strike plate to compensate for changes in offset caused by sagging doors and worn or flattened gaskets. Door offset is the space between the door face and the frame when the door is closed.
For technical drawings and 3-D models, click on a part number.
Mounting Hole Ctr.-to-Ctr. | Strike Plate Mounting Hole Ctr.-to-Ctr. | Mounting | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Min. Door Offset | Lg. | Projection | (A) | (B) | (D) | (E) | For Max. Padlock Shackle Dia. | Location | Fasteners Included | Screw Size | Each | |
Chrome-Plated Zinc—Dull | ||||||||||||
| 3/4" | 9 5/16" | 1 15/16" | 3 3/4" | 3/4" | 7/16" | 1 9/16" | 5/16" | Door Edge | No | No. 10 | 000000 | 0000000 |
Keyed Push-to-Close Locks with Handle
Mount these locks horizontally to the face of doors on refrigerators and industrial enclosures with the strike plate mounted on the frame. They're keyed alike, choose them if you need several locks that open with the same key.
Locks have an adjustable strike plate to compensate for changes in offset caused by sagging doors and worn or flattened gaskets. Door offset is the space between the door face and the frame when the door is closed.
For technical drawings and 3-D models, click on a part number.
Mounting Hole Ctr.-to-Ctr. | Strike Plate Mounting Hole Ctr.-to-Ctr. | Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Door Offset | Lg. | Projection | (A) | (B) | (C) | (D) | (E) | (F) | Fasteners Included | Screw Size | Key Number | Number of Keys Included | Specifications Met | Each | |
Zinc—Dull | |||||||||||||||
| -1/8" to 1/4" | 11" | 2 7/16" | 3 3/8" | 2 1/8" | 2 1/2" | 15/16" | 2 5/16" | 2 9/16" | No | 1/4" | 105 | 2 | NSF/ANSI Standards | 0000000 | 0000000 |
| 3/4" to 1 1/2" | 11" | 2 7/16" | 3 3/8" | 2 1/8" | 2 1/2" | 15/16" | 2 5/16" | 2 9/16" | No | 1/4" | 105 | 2 | NSF/ANSI Standards | 0000000 | 000000 |
Keyed Push-to-Close Locks with
Emergency Release Handle
An emergency release handle offers a means of escape if the door closes with someone inside an enclosure. Mount these locks horizontally to the face of doors on refrigerators and industrial enclosures with the strike plate mounted on the frame. They're keyed alike, choose them if you need several locks that open with the same key.
Locks have an adjustable strike plate to compensate for changes in offset caused by sagging doors and worn or flattened gaskets. Door offset is the space between the door face and the frame when the door is closed.
For technical drawings and 3-D models, click on a part number.
Mounting Hole Ctr.-to-Ctr. | Strike Plate Mounting Hole Ctr.-to-Ctr. | Temp. Range, °F | Mounting | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Door Offset | Lg. | Projection | For Max. Padlock Shackle Dia. | (A) | (B) | (C) | (D) | (E) | (F) | Min. | Max. | Fasteners Included | Screw Size | Key Number | No. of Keys Included | Each | |
Chrome-Plated Zinc—Polished | |||||||||||||||||
Steel Emergency Release Rod and Plastic Handle | |||||||||||||||||
| -1/8" to 1/4" | 11" | 2 1/4" | 5/16" | 3 3/8" | 2 1/8" | 2 1/2" | 15/16" | 2 5/16" | 2 9/16" | Not Rated | Not Rated | No | 1/4", No. 10 | 105 | 2 | 00000000 | 0000000 |
| 3/4" to 1 1/2" | 11" | 2 1/4" | 5/16" | 3 3/8" | 2 1/8" | 2 1/2" | 15/16" | 2 5/16" | 2 9/16" | Not Rated | Not Rated | No | 1/4", No. 10 | 105 | 2 | 00000000 | 000000 |
Fiberglass Emergency Release Rod and Plastic Handle | |||||||||||||||||
| -1/8" to 1/4" | 11" | 2 1/4" | 5/16" | 3 3/8" | 2 1/8" | 2 1/2" | 15/16" | 2 5/16" | 2 9/16" | -40° | Not Rated | No | 1/4", No. 10 | 105 | 2 | 00000000 | 000000 |
| 3/4" to 1 1/2" | 11" | 2 1/4" | 5/16" | 3 3/8" | 2 1/8" | 2 1/2" | 15/16" | 2 5/16" | 2 9/16" | -40° | Not Rated | No | 1/4", No. 10 | 105 | 2 | 00000000 | 000000 |
Edge-Mount Keyed Push-to-Close Latches with Handle
Attach these locks vertically to the side edge of doors on refrigerators and industrial enclosures with the strike plate mounted behind them on the frame. They're keyed alike, choose them if you need several locks that open with the same key.
Locks have an adjustable strike plate to compensate for changes in offset caused by sagging doors and worn or flattened gaskets. Door offset is the space between the door face and the frame when the door is closed.
Lock with plastic handle has a magnetic strike plate for airtight closure.
For technical drawings and 3-D models, click on a part number.
Mounting Hole Ctr.-to-Ctr. | Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Door Offset | Lg. | Projection | (A) | (B) | (C) | Strike Plate Mounting Hole Ctr.-to-Ctr. (E) | Fasteners Included | Screw Size | Key Number | Number of Keys Included | Each | |
Chrome-Plated Zinc—Polished | ||||||||||||
With Chrome-Plated Zinc Handle | ||||||||||||
| 3/4" | 10 1/2" | 2 5/8" | 4 5/8" | 5/8" | __ | 1/2" | No | No. 10 | 01 | 2 | 00000000 | 000000 |
With Black Plastic Handle | ||||||||||||
| 3/4" | 11 1/2" | 2 7/8" | 4 3/16" | 5/8" | 1" | 3 1/2" | No | No. 10 | 1313 | 2 | 00000000 | 000000 |
Push-to-Close Latches with Handle
Door Offset |  |
 |
Keep doors on refrigerators and industrial enclosures closed. Mount these latches horizontally to the face of the door with the strike plate mounted on the frame. They are not recommended for use on oven doors.
Latches come with three fixed strike plates to accommodate different door offsets. Door offset is the space between the door face and the frame when the door is closed.
For technical drawings and 3-D models, click on a part number.
Mounting Hole Ctr.-to-Ctr. | Mounting | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Door Offset | Lg. | Projection | (A) | (B) | (C) | Strike Plate Mounting Hole Ctr.-to-Ctr. (E) | Fasteners Included | Screw Size | Each | |
Chrome-Plated Zinc—Polished | ||||||||||
| 0", 1/8", 3/8" | 2 1/4" | 1 1/8" | 11/16" | 1 1/8" | 1 1/8" | 1 1/8" | No | No. 6 | 00000000 | 000000 |
| 0", 1/8", 3/8" | 2 13/16" | 1 5/16" | 7/8" | 1 7/16" | 1 7/16" | 1 7/16" | No | No. 8 | 00000000 | 00000 |
Pressure-Venting Push-to-Close Latches with Handle
For use on spray booths and drying ovens, these latches automatically open when the internal pressure of the enclosure reaches a set level. They can also be manually opened by pulling on the handle. Mount latches horizontally to the face of the door with the strike plate mounted on the frame. To determine door mounting location, look at the outside face of the door: if the hinges are on the right, order a right-side latch; if the hinges are on the left, order a left-side latch.
Door offset is the space between the door face and the frame when the door is closed. Pressure release force is the amount of pressure an enclosed area can sustain before the latch opens. Adjust the catch to make the latch more or less sensitive to pressure. Styles 1 and 2 adjust with a slotted screwdriver. Style 3 adjusts with a 3/16" hex key.
For technical drawings and 3-D models, click on a part number.
Mounting | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Door Offset | Release Force, lbs./sq. ft. | Lg. | Projection | Mounting Hole Ctr.-to-Ctr. (B) | Strike Plate Mounting Hole Ctr.-to-Ctr. (D) | Fasteners Included | Screw Size | Specifications Met | Each | |
316 Stainless Steel—Polished | ||||||||||
| 0" to 3/16" | 4 to 17 | 2 3/8" | 2 5/16" | 1 3/8" | 1 3/8" | No | 1/4" | FM Approved | 000000 | 0000000 |
Mounting | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Door Offset | Release Force, lbs./sq. ft. | Lg. | Projection | Mounting Hole Ctr.-to-Ctr. (B) | Strike Plate Mounting Hole Ctr.-to-Ctr. (D) | Fasteners Included | Screw Size | Specifications Met | Each | |
Iron—Dull | ||||||||||
| 0" to 3/16" | 10 to 45 | 3 3/4" | 3 1/4" | 2" | 2" | No | 5/16" | FM Approved | 0000000 | 0000000 |
| 1/4" to 13/16" | 10 to 45 | 3 3/4" | 3 1/4" | 2" | 2" | No | 5/16" | FM Approved | 0000000 | 000000 |
To determine door mounting location, look at the outside face of the door: if the hinges are on the right, order a right-side latch; if the hinges are on the left, order a left-side latch.
Mounting Hole Ctr.-to-Ctr. | Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Door Offset | Release Force, lbs./sq. ft. | Lg. | Projection | (A) | (B) | Strike Plate Mounting Hole Ctr.-to-Ctr. (D) | Fasteners Included | Screw Size | Specifications Met | Choose a Door Mounting Location | Each | |
Steel—Dull | ||||||||||||
| 0" to 3/16" | 43 to 180 | 7 3/4" | 3 1/2" | 1 3/4" | 2 7/8" | 2 7/8" | No | 3/8" | FM Approved | 0000000 | 0000000 | |
| 3/16" to 1 1/16" | 43 to 180 | 7 3/4" | 3 1/2" | 1 3/4" | 2 7/8" | 2 7/8" | No | 3/8" | FM Approved | 0000000 | 000000 | |
Heavy Duty Roller Latches
These latches are spring-loaded to overcome resistance caused by gaskets and air pressure to close doors tightly. Mount them vertically at the top of walk-in freezer doors. The arm rolls into the strike plate as the door closes for a secure hold. A firm tug releases the roller and opens the door. Door offset is the space between the door face and the frame when the door is closed.
For technical drawings and 3-D models, click on a part number.
Soft-Close Heavy Duty Roller Latches
To prevent doors from slamming, these latches are hydraulic. Mount them vertically at the top of walk-in freezer doors. The arm rolls into the strike plate as the door closes for a secure hold. A firm tug releases the roller and opens the door. Door offset is the space between the door face and the frame when the door is closed.
For technical drawings and 3-D models, click on a part number.
Heavy Duty Padlockable Swinging Bar Latches
In addition to being padlockable, this heavy duty latch comes with two handles for access from the inside as well as the outside. It's often used on refrigerators and truck doors. It is reversible for right- and left-hand mounting.
For technical drawings and 3-D models, click on a part number.
Rod | Arm Mounting Plate | Strike Plate | Mounting | Mounting Holes | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Arm Lg. | Projection | For Min. Door Thick. | Dia. | Lg. | Thread Lg. | For Max. Padlock Shackle Dia. | Lg. | Ht. | Lg. | Ht. | Fasteners Included | Screw Size | No. of | Dia. | Style | Each | |
Through-Hole Mount | |||||||||||||||||
Zinc-Plated Iron—Dull (Zinc Handle) | |||||||||||||||||
| 7 1/4" | 2 1/8" | 2" | 9/16" | 8 3/4" | 7" | 3/8" | 1 1/2" | 2 1/4" | 7/8" | 7 3/8" | No | No. 10 | 6 | 3/16" | Countersunk | 0000000 | 0000000 |
Heavy Duty Swinging Bar Latches
Designed to stand up to heavy use, this latch is often seen on refrigerators and truck doors. It's reversible for right- and left-hand mounting.
For technical drawings and 3-D models, click on a part number.
Arm Mounting Plate | Strike Plate | Mounting | Mounting Holes | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Arm Lg. | Projection | Lg. | Ht. | Lg. | Ht. | Fasteners Included | Screw Size | No. of | Dia. | Style | Each | |
Zinc-Plated Steel—Dull | ||||||||||||
| 7 1/4" | 1 7/8" | 1 1/2" | 2 1/4" | 7/8" | 3 3/8" | No | No. 10 | 6 | 3/16" | Countersunk | 0000000 | 0000000 |