Clear All
Material Material |
|---|
|
Liner Material Liner Material |
|---|
|
For Shaft Diameter For Shaft Diameter |
|---|
|
|
|
Bearing Type Bearing Type |
|---|
 | Plain |
For Shaft Type For Shaft Type |
|---|
 |  |
| Round | Round with Support Rail |
Length Length |
|---|
Linear Bearing Component Linear Bearing Component |
|---|
 |  |
| Bearing | Bearing in Housing |
ID ID |
|---|
OD OD |
|---|
Lubrication Lubrication |
|---|
|
For Shaft Material For Shaft Material |
|---|
|
Alignment Style Alignment Style |
|---|
|
For Housing ID For Housing ID |
|---|
|
|
|
Bearing Material Bearing Material |
|---|
|
Housing Type Housing Type |
|---|
|  |
| Base Mount | Flange Mount |
Maximum Temperature Maximum Temperature |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Static Load Capacity Static Load Capacity |
|---|
|
For Load Direction For Load Direction |
|---|
 |  |
| Radial | Combined Radial and Thrust |
High-Load Dry-Running Sleeve Bearings
Frelon Plastic
Bearings with
6061 Aluminum Shell
Bearings with
6061 Aluminum Shell
A metal shell adds strength.
Frelon bearings with 6061 aluminum shell reduce vibration and are chemically inert.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Temperature Range, °F | Each | |
Frelon Plastic Bearings with 6061 Aluminum Shell | |||||
|---|---|---|---|---|---|
For 1/4" Shaft Dia. | |||||
| 3/8" | 1/2" | 310 lbs. @ 120 rpm | -400° to 400° | 00000000 | 000000 |
For 3/8" Shaft Dia. | |||||
| 5/8" | 1/2" | 310 lbs. @ 120 rpm | -400° to 400° | 00000000 | 00000 |
For 1/2" Shaft Dia. | |||||
| 3/4" | 3/4" | 470 lbs. @ 120 rpm | -400° to 400° | 00000000 | 00000 |
For 5/8" Shaft Dia. | |||||
| 7/8" | 3/4" | 950 lbs. @ 60 rpm | -400° to 400° | 00000000 | 00000 |
For 3/4" Shaft Dia. | |||||
| 1" | 1" | 1,250 lbs. @ 60 rpm | -400° to 400° | 00000000 | 00000 |
For 1" Shaft Dia. | |||||
| 1 1/4" | 1 1/2" | 1,900 lbs. @ 60 rpm | -400° to 400° | 00000000 | 00000 |
For 1 1/4" Shaft Dia. | |||||
| 1 1/2" | 2" | 5,050 lbs. @ 30 rpm | -400° to 400° | 00000000 | 00000 |
For 1 1/2" Shaft Dia. | |||||
| 1 3/4" | 2" | 5,050 lbs. @ 30 rpm | -400° to 400° | 00000000 | 00000 |
For 2" Shaft Dia. | |||||
| 2 1/4" | 3" | 7,600 lbs. @ 30 rpm | -400° to 400° | 00000000 | 000000 |
Metric Frelon Plastic Bearings with 6061 Aluminum Shell | |||||
For 6mm Shaft Dia. | |||||
| 10mm | 10mm | 250 lbs. @ 120 rpm | -400° to 400° | 0000000 | 00000 |
For 8mm Shaft Dia. | |||||
| 12mm | 8mm | 200 lbs. @ 120 rpm | -400° to 400° | 0000000 | 00000 |
| 12mm | 12mm | 300 lbs. @ 120 rpm | -400° to 400° | 0000000 | 00000 |
| 14mm | 8mm | 200 lbs. @ 120 rpm | -400° to 400° | 00000000 | 00000 |
For 10mm Shaft Dia. | |||||
| 14mm | 16mm | 400 lbs. @ 120 rpm | -400° to 400° | 0000000 | 00000 |
For 12mm Shaft Dia. | |||||
| 16mm | 12mm | 300 lbs. @ 120 rpm | -400° to 400° | 00000000 | 00000 |
| 16mm | 16mm | 400 lbs. @ 120 rpm | -400° to 400° | 0000000 | 00000 |
For 16mm Shaft Dia. | |||||
| 20mm | 12mm | 600 lbs. @ 60 rpm | -400° to 400° | 0000000 | 00000 |
| 20mm | 16mm | 800 lbs. @ 60 rpm | -400° to 400° | 0000000 | 00000 |
| 20mm | 25mm | 1,250 lbs. @ 60 rpm | -400° to 400° | 00000000 | 00000 |
For 20mm Shaft Dia. | |||||
| 25mm | 20mm | 1,000 lbs. @ 60 rpm | -400° to 400° | 0000000 | 00000 |
| 25mm | 30mm | 1,500 lbs. @ 60 rpm | -400° to 400° | 00000000 | 00000 |
For 25mm Shaft Dia. | |||||
| 30mm | 25mm | 1,250 lbs. @ 60 rpm | -400° to 400° | 0000000 | 00000 |
For 30mm Shaft Dia. | |||||
| 35mm | 25mm | 2,500 lbs. @ 30 rpm | -400° to 400° | 00000000 | 00000 |
| 35mm | 30mm | 3,000 lbs. @ 30 rpm | -400° to 400° | 0000000 | 00000 |
High-Load Dry-Running Flanged Sleeve Bearings
An aluminum shell adds strength. Made of Frelon, a PTFE composite, these bearings are both slippery and chemically inert.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Temperature Range, °F | Each | |
Frelon Plastic Bearings with 6061 Aluminum Shell | ||||||||
|---|---|---|---|---|---|---|---|---|
For 1/4" Shaft Dia. | ||||||||
| 3/8" | 1/2" | 1/2" | 1/16" | 310 lbs. @ 120 rpm | 185 lbs. @ 120 rpm | -400° to 400° | 00000000 | 000000 |
For 3/8" Shaft Dia. | ||||||||
| 5/8" | 1/2" | 7/8" | 1/8" | 310 lbs. @ 120 rpm | 350 lbs. @ 120 rpm | -400° to 400° | 00000000 | 00000 |
For 1/2" Shaft Dia. | ||||||||
| 3/4" | 3/4" | 1" | 1/8" | 470 lbs. @ 120 rpm | 370 lbs. @ 120 rpm | -400° to 400° | 00000000 | 00000 |
For 5/8" Shaft Dia. | ||||||||
| 7/8" | 3/4" | 1" | 1/8" | 950 lbs. @ 60 rpm | 600 lbs. @ 60 rpm | -400° to 400° | 00000000 | 00000 |
For 3/4" Shaft Dia. | ||||||||
| 1" | 1" | 1 1/4" | 1/8" | 1,250 lbs. @ 60 rpm | 800 lbs. @ 60 rpm | -400° to 400° | 00000000 | 00000 |
For 1" Shaft Dia. | ||||||||
| 1 1/4" | 1 1/2" | 1 1/2" | 1/8" | 1,900 lbs. @ 60 rpm | 830 lbs. @ 60 rpm | -400° to 400° | 00000000 | 00000 |
For 1 1/4" Shaft Dia. | ||||||||
| 1 1/2" | 2" | 1 3/4" | 1/8" | 5,050 lbs. @ 30 rpm | 1,700 lbs. @ 30 rpm | -400° to 400° | 00000000 | 00000 |
For 2" Shaft Dia. | ||||||||
| 2 1/4" | 3" | 2 1/2" | 1/8" | 7,600 lbs. @ 30 rpm | 1,800 lbs. @ 30 rpm | -400° to 400° | 00000000 | 000000 |
For 6mm Shaft Dia. | ||||||||
| 10mm | 10mm | 14mm | 2mm | 250 lbs. @ 120 rpm | 220 lbs. @ 120 rpm | -400° to 400° | 0000000 | 00000 |
For 8mm Shaft Dia. | ||||||||
| 12mm | 8mm | 16mm | 2mm | 200 lbs. @ 120 rpm | 235 lbs. @ 120 rpm | -400° to 400° | 0000000 | 00000 |
| 12mm | 12mm | 16mm | 2mm | 300 lbs. @ 120 rpm | 235 lbs. @ 120 rpm | -400° to 400° | 0000000 | 00000 |
For 10mm Shaft Dia. | ||||||||
| 16mm | 16mm | 22mm | 3mm | 400 lbs. @ 120 rpm | 340 lbs. @ 120 rpm | -400° to 400° | 00000000 | 00000 |
For 12mm Shaft Dia. | ||||||||
| 18mm | 8mm | 24mm | 3mm | 200 lbs. @ 120 rpm | 350 lbs. @ 120 rpm | -400° to 400° | 00000000 | 00000 |
| 18mm | 12mm | 24mm | 3mm | 300 lbs. @ 120 rpm | 350 lbs. @ 120 rpm | -400° to 400° | 00000000 | 00000 |
For 16mm Shaft Dia. | ||||||||
| 20mm | 25mm | 27mm | 3mm | 1,250 lbs. @ 60 rpm | 680 lbs. @ 60 rpm | -400° to 400° | 00000000 | 00000 |
For 20mm Shaft Dia. | ||||||||
| 26mm | 20mm | 32mm | 3mm | 1,000 lbs. @ 60 rpm | 760 lbs. @ 60 rpm | -400° to 400° | 0000000 | 00000 |
| 26mm | 30mm | 32mm | 3mm | 1,500 lbs. @ 60 rpm | 760 lbs. @ 60 rpm | -400° to 400° | 00000000 | 00000 |
For 25mm Shaft Dia. | ||||||||
| 30mm | 20mm | 39mm | 4mm | 1,000 lbs. @ 60 rpm | 900 lbs. @ 60 rpm | -400° to 400° | 00000000 | 00000 |
| 30mm | 25mm | 39mm | 4mm | 1,250 lbs. @ 60 rpm | 900 lbs. @ 60 rpm | -400° to 400° | 0000000 | 00000 |
For 30mm Shaft Dia. | ||||||||
| 38mm | 30mm | 46mm | 4mm | 3,000 lbs. @ 30 rpm | 2,050 lbs. @ 30 rpm | -400° to 400° | 0000000 | 00000 |
For 35mm Shaft Dia. | ||||||||
| 45mm | 35mm | 55mm | 5mm | 3,500 lbs. @ 30 rpm | 2,550 lbs. @ 30 rpm | -400° to 400° | 00000000 | 000000 |
Linear Sleeve Bearings
Frelon-Lined
Bearings are for use with round end-supported shafts. To install, slide bearings into a housing (not included) and secure with two retaining rings (sold individually).
Fixed Alignment—Bearings are for use where shaft misalignment is unlikely. Bearings with 0.0005" shaft clearance are best for precision applications. Bearings with 0.0015" shaft clearance are less likely to bind on your shaft than bearings with 0.0005" shaft clearance.
Frelon-lined bearings are wear and chemical resistant. Frelon-lined aluminum bearings have good corrosion resistance. Note: Not for use with bare aluminum, chrome-plated steel, or 300 series stainless steel shafts. Frelon-lined 316 stainless steel bearings have excellent corrosion resistance. Note: Not for use with chrome-plated steel.
For technical drawings and 3-D models, click on a part number.
Fixed Alignment
Bearings | External Retaining Rings | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Shaft Clearance | Overall Lg. | For Housing ID | Retaining Ring Groove End-to-End Lg. | Dynamic Load Capacity | Static Load Capacity, lbs. | Temperature Range, ° F | For Shaft Material | Each | Each | ||
Frelon-Lined 316 Stainless Steel Bearings | ||||||||||||
| 1/4" | 0.0005" | 3/4" | 0.5006" - 0.5017" | 0.519" | 15 lbs. @ 100 fpm | 300 | -400° to 400° | Aluminum, Stainless Steel, Steel | 0000000 | 000000 | 0000000 | 00000 |
| 3/8" | 0.0005" | 7/8" | 0.6256" - 0.6267" | 0.644" | 30 lbs. @ 100 fpm | 510 | -400° to 400° | Aluminum, Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 000 |
| 1/2" | 0.0005" | 1 1/4" | 0.8758" - 0.8771" | 0.971" | 60 lbs. @ 100 fpm | 975 | -400° to 400° | Aluminum, Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 000 |
| 5/8" | 0.0005" | 1 1/2" | 1.1258" - 1.1271" | 1.116" | 90 lbs. @ 100 fpm | 1,400 | -400° to 400° | Aluminum, Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 000 |
| 3/4" | 0.0005" | 1 5/8" | 1.2510" - 1.2525" | 1.178" | 100 lbs. @ 100 fpm | 1,900 | -400° to 400° | Aluminum, Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 000 |
| 1" | 0.0005" | 2 1/4" | 1.5635" - 1.5650" | 1.765" | 200 lbs. @ 100 fpm | 3,500 | -400° to 400° | Aluminum, Stainless Steel, Steel | 0000000 | 000000 | 0000000 | 0000 |
| 1 1/4" | 0.0005" | 2 5/8" | 2.0012" - 2.0030" | 2.015" | 300 lbs. @ 100 fpm | 5,100 | -400° to 400° | Aluminum, Stainless Steel, Steel | 0000000 | 000000 | 0000000 | 0000 |
| 1 1/2" | 0.0005" | 3" | 2.3762" - 2.3780" | 2.428" | 450 lbs. @ 100 fpm | 7,000 | -400° to 400° | Aluminum, Stainless Steel, Steel | 0000000 | 000000 | 0000000 | 0000 |
Frelon-Lined 6061 Aluminum Bearings | ||||||||||||
| 3/16" | 0.0005" | 9/16" | 0.3755" - 0.3764" | 0.435" | 20 lbs. @ 100 fpm | 220 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 000 |
| 3/16" | 0.0015" | 9/16" | 0.3755" - 0.3764" | 0.435" | 20 lbs. @ 100 fpm | 220 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 000 |
| 1/4" | 0.0005" | 3/4" | 0.5006" - 0.5017" | 0.519" | 35 lbs. @ 100 fpm | 600 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 000 |
| 1/4" | 0.0015" | 3/4" | 0.5006" - 0.5017" | 0.519" | 35 lbs. @ 100 fpm | 600 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 000 |
| 3/8" | 0.0005" | 7/8" | 0.6256" - 0.6267" | 0.644" | 60 lbs. @ 100 fpm | 1,000 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 000 |
| 3/8" | 0.0015" | 7/8" | 0.6256" - 0.6267" | 0.644" | 60 lbs. @ 100 fpm | 1,000 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 000 |
| 1/2" | 0.0005" | 1 1/4" | 0.8758" - 0.8771" | 0.971" | 100 lbs. @ 100 fpm | 1,900 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 000 |
| 1/2" | 0.0015" | 1 1/4" | 0.8758" - 0.8771" | 0.971" | 100 lbs. @ 100 fpm | 1,900 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 000 |
| 5/8" | 0.0005" | 1 1/2" | 1.1258" - 1.1271" | 1.116" | 150 lbs. @ 100 fpm | 2,900 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 000 |
| 5/8" | 0.0015" | 1 1/2" | 1.1258" - 1.1271" | 1.116" | 150 lbs. @ 100 fpm | 2,900 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 000 |
| 3/4" | 0.0005" | 1 5/8" | 1.2510" - 1.2525" | 1.178" | 200 lbs. @ 100 fpm | 3,800 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 000 |
| 3/4" | 0.0015" | 1 5/8" | 1.2510" - 1.2525" | 1.178" | 200 lbs. @ 100 fpm | 3,800 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 000 |
| 1" | 0.0005" | 2 1/4" | 1.5635" - 1.5650" | 1.765" | 450 lbs. @ 100 fpm | 7,000 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 0000 |
| 1" | 0.0015" | 2 1/4" | 1.5635" - 1.5650" | 1.765" | 450 lbs. @ 100 fpm | 7,000 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 0000 |
| 1 1/4" | 0.0005" | 2 5/8" | 2.0012" - 2.0030" | 2.015" | 600 lbs. @ 100 fpm | 10,000 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 0000 |
| 1 1/4" | 0.0015" | 2 5/8" | 2.0012" - 2.0030" | 2.015" | 600 lbs. @ 100 fpm | 10,000 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 0000 |
| 1 1/2" | 0.0005" | 3" | 2.3762" - 2.3780" | 2.428" | 900 lbs. @ 100 fpm | 14,000 | -400° to 400° | Steel | 00000000 | 000000 | 0000000 | 0000 |
| 1 1/2" | 0.0015" | 3" | 2.3762" - 2.3780" | 2.428" | 900 lbs. @ 100 fpm | 14,000 | -400° to 400° | Steel | 00000000 | 000000 | 0000000 | 0000 |
| 2" | 0.0005" | 4" | 3.0012" - 3.0030" | 3.21" | 1,500 lbs. @ 100 fpm | 25,000 | -400° to 400° | Steel | 00000000 | 000000 | 0000000 | 00000 |
| 2" | 0.0015" | 4" | 3.0012" - 3.0030" | 3.21" | 1,500 lbs. @ 100 fpm | 25,000 | -400° to 400° | Steel | 00000000 | 000000 | 0000000 | 00000 |
Fixed Alignment–Metric
Bearings | External Retaining Rings | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia., mm | Shaft Clearance | Overall Lg., mm | For Housing ID, mm | Retaining Ring Groove End-to-End Lg., mm | Dynamic Load Capacity | Static Load Capacity, lbs. | Temperature Range, ° F | For Shaft Material | Each | Each | ||
Frelon-Lined 6061 Aluminum Bearings | ||||||||||||
| 5 | 0.0005" | 22 | 12.016 - 12.043 | 14.28 | 30 lbs. @ 100 fpm | 510 | -400° to 400° | Steel | 00000000 | 000000 | 0000000 | 00000 |
| 8 | 0.0005" | 25 | 16.016 - 16.043 | 16.28 | 60 lbs. @ 100 fpm | 925 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 000 |
| 12 | 0.0005" | 32 | 22.020 - 22.053 | 22.64 | 100 lbs. @ 100 fpm | 1,700 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 0000 |
| 16 | 0.0005" | 36 | 26.020 - 26.053 | 24.64 | 150 lbs. @ 100 fpm | 2,600 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 0000 |
| 20 | 0.0005" | 45 | 32.025 - 32.064 | 31.26 | 250 lbs. @ 100 fpm | 4,100 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 0000 |
| 25 | 0.0005" | 58 | 40.025 - 40.064 | 43.8 | 400 lbs. @ 100 fpm | 6,700 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 0000 |
| 30 | 0.0005" | 68 | 47.025 - 47.064 | 51.8 | 600 lbs. @ 100 fpm | 9,400 | -400° to 400° | Steel | 00000000 | 000000 | 0000000 | 0000 |
Linear Sleeve Bearings for Support Rail Shafts
Frelon-Lined
Mount these bearings on a support rail shaft for applications requiring maximum rigidity. To install, slide bearings into a housing (not included) and secure with two retaining rings (sold individually).
Fixed Alignment—Bearings are for use where shaft misalignment is unlikely. Bearings with 0.0005" shaft clearance are best for precision applications. Bearings with 0.0015" shaft clearance are less likely to bind on your shaft than bearings with 0.0005" shaft clearance.
Frelon-lined bearings are wear and chemical resistant. Note: Not for use with bare aluminum, chrome-plated steel, or 300 series stainless steel shafts.
For technical drawings and 3-D models, click on a part number.
Bearings | External Retaining Rings | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Shaft Clearance | Overall Lg. | Wd. | For Housing ID | Retaining Ring Groove End-to-End Lg. | Dynamic Load Cap. | Static Load Cap., lbs. | Temperature Range, ° F | For Shaft Material | Each | Each | ||
Fixed Alignment | |||||||||||||
Frelon-Lined 6061 Aluminum Bearings | |||||||||||||
| 3/8" | 0.0005" | 7/8" | 1/4" | 0.6256" - 0.6267" | 0.644" | 60 lbs. @ 100 fpm | 1,000 | -400° to 400° | Steel | 00000000 | 000000 | 0000000 | 00000 |
| 3/8" | 0.0015" | 7/8" | 1/4" | 0.6256" - 0.6267" | 0.644" | 60 lbs. @ 100 fpm | 1,000 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 000 |
| 1/2" | 0.0005" | 1 1/4" | 5/16" | 0.8758" - 0.8771" | 0.971" | 100 lbs. @ 100 fpm | 1,900 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 000 |
| 1/2" | 0.0015" | 1 1/4" | 5/16" | 0.8758" - 0.8771" | 0.971" | 100 lbs. @ 100 fpm | 1,900 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 000 |
| 5/8" | 0.0005" | 1 1/2" | 3/8" | 1.1258" - 1.1271" | 1.116" | 150 lbs. @ 100 fpm | 2,900 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 000 |
| 5/8" | 0.0015" | 1 1/2" | 3/8" | 1.1258" - 1.1271" | 1.116" | 150 lbs. @ 100 fpm | 2,900 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 000 |
| 3/4" | 0.0005" | 1 5/8" | 7/16" | 1.2510" - 1.2525" | 1.178" | 200 lbs. @ 100 fpm | 3,800 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 000 |
| 3/4" | 0.0015" | 1 5/8" | 7/16" | 1.2510" - 1.2525" | 1.178" | 200 lbs. @ 100 fpm | 3,800 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 000 |
| 1" | 0.0005" | 2 1/4" | 9/16" | 1.5635" - 1.5650" | 1.765" | 450 lbs. @ 100 fpm | 7,000 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 0000 |
| 1" | 0.0015" | 2 1/4" | 9/16" | 1.5635" - 1.5650" | 1.765" | 450 lbs. @ 100 fpm | 7,000 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 0000 |
| 1 1/4" | 0.0005" | 2 5/8" | 5/8" | 2.0012" - 2.0030" | 2.015" | 600 lbs. @ 100 fpm | 10,000 | -400° to 400° | Steel | 00000000 | 000000 | 0000000 | 0000 |
| 1 1/4" | 0.0015" | 2 5/8" | 5/8" | 2.0012" - 2.0030" | 2.015" | 600 lbs. @ 100 fpm | 10,000 | -400° to 400° | Steel | 00000000 | 000000 | 0000000 | 0000 |
| 1 1/2" | 0.0005" | 3" | 3/4" | 2.3762" - 2.3780" | 2.428" | 900 lbs. @ 100 fpm | 14,000 | -400° to 400° | Steel | 00000000 | 000000 | 0000000 | 0000 |
| 1 1/2" | 0.0015" | 3" | 3/4" | 2.3762" - 2.3780" | 2.428" | 900 lbs. @ 100 fpm | 14,000 | -400° to 400° | Steel | 00000000 | 000000 | 0000000 | 0000 |
| 2" | 0.0005" | 4" | 1" | 3.0012" - 3.0030" | 3.21" | 1,500 lbs. @ 100 fpm | 25,000 | -400° to 400° | Steel | 00000000 | 000000 | 0000000 | 00000 |
| 2" | 0.0015" | 4" | 1" | 3.0012" - 3.0030" | 3.21" | 1,500 lbs. @ 100 fpm | 25,000 | -400° to 400° | Steel | 00000000 | 000000 | 0000000 | 00000 |
Chemical-Resistant Flange-Mounted Linear Sleeve Bearings
The Frelon liner on these bearings allows them to stand up to a wider range of chemicals than other flange-mounted linear sleeve bearings. All are self-aligning to compensate for shaft misalignment and are for use with round end-supported shafts. Note: Not for use with bare aluminum or chrome-plated shafts.
Bearings with 0.0005" shaft clearance are best for precision applications. Bearings with 0.0015" shaft clearance are less likely to bind on your shaft than bearings with 0.0005" shaft clearance.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting Holes | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Shaft Clearance | Lg. | Wd. | Ht. | Flange Thick. | Bolt Circle Dia. | OD | Dynamic Load Capacity | Static Load Capacity, lbs. | Temperature Range, ° F | For Shaft Material | No. of | Dia. | Each | |
Self Aligning with 0.5° Misalignment Capability | |||||||||||||||
Frelon-Lined 6061 Aluminum Bearings with 6061 Aluminum Housing | |||||||||||||||
| 3/8" | 0.0005" | 1.31" | 1 1/4" | 1 1/4" | 3/16" | 1 13/32" | 7/8" | 90 lbs. @ 100 fpm | 1,000 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 1/8" | 000000000 | 0000000 |
| 3/8" | 0.0015" | 1.31" | 1 1/4" | 1 1/4" | 3/16" | 1 13/32" | 7/8" | 90 lbs. @ 100 fpm | 1,000 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 1/8" | 000000000 | 000000 |
| 1/2" | 0.0005" | 1 11/16" | 1 5/8" | 1 5/8" | 1/4" | 1 3/4" | 1 1/4" | 150 lbs. @ 100 fpm | 1,900 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 3/16" | 000000000 | 000000 |
| 1/2" | 0.0005" | 3 3/8" | 1 5/8" | 1 5/8" | 1/4" | 1 3/4" | 1 1/4" | 300 lbs. @ 100 fpm | 3,900 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 3/16" | 000000000 | 000000 |
| 1/2" | 0.0015" | 1 11/16" | 1 5/8" | 1 5/8" | 1/4" | 1 3/4" | 1 1/4" | 150 lbs. @ 100 fpm | 1,900 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 3/16" | 000000000 | 000000 |
| 1/2" | 0.0015" | 3 3/8" | 1 5/8" | 1 5/8" | 1/4" | 1 3/4" | 1 1/4" | 300 lbs. @ 100 fpm | 3,900 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 3/16" | 000000000 | 000000 |
| 3/4" | 0.0005" | 2 1/16" | 2 3/8" | 2 3/8" | 3/8" | 2 15/32" | 1 3/4" | 300 lbs. @ 100 fpm | 2,900 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 3/16" | 000000000 | 000000 |
| 3/4" | 0.0005" | 4 3/16" | 2 3/8" | 2 3/8" | 3/8" | 2 15/32" | 1 3/4" | 600 lbs. @ 100 fpm | 5,800 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 3/16" | 000000000 | 000000 |
| 3/4" | 0.0015" | 2 1/16" | 2 3/8" | 2 3/8" | 3/8" | 2 15/32" | 1 3/4" | 300 lbs. @ 100 fpm | 2,900 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 3/16" | 000000000 | 000000 |
| 3/4" | 0.0015" | 4 3/16" | 2 3/8" | 2 3/8" | 3/8" | 2 15/32" | 1 3/4" | 600 lbs. @ 100 fpm | 5,800 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 3/16" | 000000000 | 000000 |
| 1" | 0.0005" | 2 13/16" | 2 3/4" | 2 3/4" | 1/2" | 3" | 2 1/4" | 500 lbs. @ 100 fpm | 3,800 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 1/4" | 000000000 | 000000 |
| 1" | 0.0005" | 5 5/8" | 2 3/4" | 2 3/4" | 1/2" | 3" | 2 1/4" | 1,000 lbs. @ 100 fpm | 7,600 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 1/4" | 000000000 | 000000 |
| 1" | 0.0015" | 2 13/16" | 2 3/4" | 2 3/4" | 1/2" | 3" | 2 1/4" | 500 lbs. @ 100 fpm | 3,800 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 1/4" | 000000000 | 000000 |
| 1" | 0.0015" | 5 5/8" | 2 3/4" | 2 3/4" | 1/2" | 3" | 2 1/4" | 1,000 lbs. @ 100 fpm | 7,600 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 1/4" | 000000000 | 000000 |
| 1 1/4" | 0.0005" | 3 5/8" | 3 7/8" | 3 7/8" | 5/8" | 4 7/32" | 2 5/8" | 900 lbs. @ 100 fpm | 10,000 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 3/8" | 000000000 | 000000 |
| 1 1/4" | 0.0015" | 3 5/8" | 3 7/8" | 3 7/8" | 5/8" | 4 7/32" | 2 5/8" | 900 lbs. @ 100 fpm | 10,000 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 3/8" | 000000000 | 000000 |
Mounted Linear Sleeve Bearings
Virtually maintenance free, these bearings have slippery, chemical-resistant liners that don't require added lubrication. All are for use with round end-supported shafts.
Self Aligning—Bearings compensate for shaft misalignment. Bearings with 0.0005" shaft clearance are best for precision applications. Bearings with 0.0015" shaft clearance are less likely to bind on your shaft than bearings with 0.0005" shaft clearance.
Frelon liners are stronger and more wear resistant than PTFE liners.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting Holes | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Shaft Clearance | Lg. | Wd. | Ht. | Center Ht. | Dynamic Load Capacity | Static Load Capacity, lbs. | Temperature Range, ° F | For Shaft Material | No. of | Dia. | Each | |
Self Aligning with 0.5° Misalignment Capability | |||||||||||||
Frelon-Lined 6061 Aluminum Bearings with 6063 Aluminum Housing | |||||||||||||
| 1/4" | 0.0005" | 1 3/16" | 1 5/8" | 13/16" | 7/16" | 50 lbs. @ 100 fpm | 600 | -400° to 400° | Steel | 4 | 5/32" | 00000000 | 000000 |
| 1/4" | 0.0015" | 1 3/16" | 1 5/8" | 13/16" | 7/16" | 50 lbs. @ 100 fpm | 600 | -400° to 400° | Steel | 4 | 5/32" | 00000000 | 00000 |
| 1/4" | 0.0005" | 2 1/2" | 1 5/8" | 13/16" | 7/16" | 100 lbs. @ 100 fpm | 1,200 | -400° to 400° | Steel | 8 | 5/32" | 00000000 | 000000 |
| 1/4" | 0.0015" | 2 1/2" | 1 5/8" | 13/16" | 7/16" | 100 lbs. @ 100 fpm | 1,200 | -400° to 400° | Steel | 8 | 5/32" | 00000000 | 000000 |
| 3/8" | 0.0005" | 1 5/16" | 1 3/4" | 15/16" | 1/2" | 90 lbs. @ 100 fpm | 1,000 | -400° to 400° | Steel | 4 | 5/32" | 00000000 | 00000 |
| 3/8" | 0.0015" | 1 5/16" | 1 3/4" | 15/16" | 1/2" | 90 lbs. @ 100 fpm | 1,000 | -400° to 400° | Steel | 4 | 5/32" | 00000000 | 00000 |
| 3/8" | 0.0005" | 2 3/4" | 1 3/4" | 15/16" | 1/2" | 200 lbs. @ 100 fpm | 2,000 | -400° to 400° | Steel | 8 | 5/32" | 00000000 | 000000 |
| 3/8" | 0.0015" | 2 3/4" | 1 3/4" | 15/16" | 1/2" | 200 lbs. @ 100 fpm | 2,000 | -400° to 400° | Steel | 8 | 5/32" | 00000000 | 000000 |
| 1/2" | 0.0005" | 1 11/16" | 2" | 1 1/4" | 11/16" | 150 lbs. @ 100 fpm | 1,900 | -400° to 400° | Steel | 4 | 5/32" | 00000000 | 00000 |
| 1/2" | 0.0015" | 1 11/16" | 2" | 1 1/4" | 11/16" | 150 lbs. @ 100 fpm | 1,900 | -400° to 400° | Steel | 4 | 5/32" | 00000000 | 00000 |
| 1/2" | 0.0005" | 3 1/2" | 2" | 1 1/4" | 11/16" | 350 lbs. @ 100 fpm | 3,900 | -400° to 400° | Steel | 8 | 5/32" | 00000000 | 000000 |
| 1/2" | 0.0015" | 3 1/2" | 2" | 1 1/4" | 11/16" | 350 lbs. @ 100 fpm | 3,900 | -400° to 400° | Steel | 8 | 5/32" | 00000000 | 000000 |
| 5/8" | 0.0005" | 1 15/16" | 2 1/2" | 1 5/8" | 7/8" | 200 lbs. @ 100 fpm | 2,900 | -400° to 400° | Steel | 4 | 3/16" | 00000000 | 00000 |
| 5/8" | 0.0015" | 1 15/16" | 2 1/2" | 1 5/8" | 7/8" | 200 lbs. @ 100 fpm | 2,900 | -400° to 400° | Steel | 4 | 3/16" | 00000000 | 00000 |
| 5/8" | 0.0005" | 4" | 2 1/2" | 1 5/8" | 7/8" | 500 lbs. @ 100 fpm | 5,800 | -400° to 400° | Steel | 8 | 3/16" | 00000000 | 000000 |
| 5/8" | 0.0015" | 4" | 2 1/2" | 1 5/8" | 7/8" | 500 lbs. @ 100 fpm | 5,800 | -400° to 400° | Steel | 8 | 3/16" | 00000000 | 000000 |
| 3/4" | 0.0005" | 2 1/16" | 2 3/4" | 1 3/4" | 15/16" | 300 lbs. @ 100 fpm | 3,800 | -400° to 400° | Steel | 4 | 3/16" | 00000000 | 00000 |
| 3/4" | 0.0015" | 2 1/16" | 2 3/4" | 1 3/4" | 15/16" | 300 lbs. @ 100 fpm | 3,800 | -400° to 400° | Steel | 4 | 3/16" | 00000000 | 00000 |
| 3/4" | 0.0005" | 4 1/2" | 2 3/4" | 1 3/4" | 15/16" | 600 lbs. @ 100 fpm | 7,600 | -400° to 400° | Steel | 8 | 3/16" | 00000000 | 000000 |
| 3/4" | 0.0015" | 4 1/2" | 2 3/4" | 1 3/4" | 15/16" | 600 lbs. @ 100 fpm | 7,600 | -400° to 400° | Steel | 8 | 3/16" | 00000000 | 000000 |
| 1" | 0.0005" | 2 13/16" | 3 1/4" | 2 3/16" | 1 3/16" | 500 lbs. @ 100 fpm | 7,000 | -400° to 400° | Steel | 4 | 7/32" | 00000000 | 000000 |
| 1" | 0.0015" | 2 13/16" | 3 1/4" | 2 3/16" | 1 3/16" | 500 lbs. @ 100 fpm | 7,000 | -400° to 400° | Steel | 4 | 7/32" | 00000000 | 000000 |
| 1" | 0.0005" | 6" | 3 1/4" | 2 3/16" | 1 3/16" | 1,000 lbs. @ 100 fpm | 14,000 | -400° to 400° | Steel | 8 | 7/32" | 00000000 | 000000 |
| 1" | 0.0015" | 6" | 3 1/4" | 2 3/16" | 1 3/16" | 1,000 lbs. @ 100 fpm | 14,000 | -400° to 400° | Steel | 8 | 7/32" | 00000000 | 000000 |
| 1 1/4" | 0.0005" | 3 5/8" | 4" | 2 13/16" | 1 1/2" | 900 lbs. @ 100 fpm | 10,000 | -400° to 400° | Steel | 4 | 7/32" | 00000000 | 000000 |
| 1 1/4" | 0.0015" | 3 5/8" | 4" | 2 13/16" | 1 1/2" | 900 lbs. @ 100 fpm | 10,000 | -400° to 400° | Steel | 4 | 7/32" | 00000000 | 000000 |
| 1 1/4" | 0.0005" | 7 1/2" | 4" | 2 13/16" | 1 1/2" | 1,500 lbs. @ 100 fpm | 20,000 | -400° to 400° | Steel | 8 | 7/32" | 00000000 | 000000 |
| 1 1/4" | 0.0015" | 7 1/2" | 4" | 2 13/16" | 1 1/2" | 1,500 lbs. @ 100 fpm | 20,000 | -400° to 400° | Steel | 8 | 7/32" | 00000000 | 000000 |
| 1 1/2" | 0.0005" | 4" | 4 3/4" | 3 1/4" | 1 3/4" | 1,000 lbs. @ 100 fpm | 14,000 | -400° to 400° | Steel | 4 | 9/32" | 00000000 | 000000 |
| 1 1/2" | 0.0015" | 4" | 4 3/4" | 3 1/4" | 1 3/4" | 1,000 lbs. @ 100 fpm | 14,000 | -400° to 400° | Steel | 4 | 9/32" | 00000000 | 000000 |
| 1 1/2" | 0.0005" | 9" | 4 3/4" | 3 1/4" | 1 3/4" | 2,500 lbs. @ 100 fpm | 28,000 | -400° to 400° | Steel | 8 | 9/32" | 00000000 | 000000 |
| 1 1/2" | 0.0015" | 9" | 4 3/4" | 3 1/4" | 1 3/4" | 2,500 lbs. @ 100 fpm | 28,000 | -400° to 400° | Steel | 8 | 9/32" | 00000000 | 000000 |
| 2" | 0.0005" | 5" | 6" | 4 1/16" | 2 1/8" | 2,000 lbs. @ 100 fpm | 25,000 | -400° to 400° | Steel | 4 | 13/32" | 00000000 | 000000 |
| 2" | 0.0015" | 5" | 6" | 4 1/16" | 2 1/8" | 2,000 lbs. @ 100 fpm | 25,000 | -400° to 400° | Steel | 4 | 13/32" | 00000000 | 000000 |
| 2" | 0.0005" | 10" | 6" | 4 1/16" | 2 1/8" | 4,000 lbs. @ 100 fpm | 50,000 | -400° to 400° | Steel | 8 | 13/32" | 00000000 | 000000 |
| 2" | 0.0015" | 10" | 6" | 4 1/16" | 2 1/8" | 4,000 lbs. @ 100 fpm | 50,000 | -400° to 400° | Steel | 8 | 13/32" | 00000000 | 000000 |
Mounted Linear Sleeve Bearings for Support Rail Shafts
Virtually maintenance free, these bearings have slippery, chemical-resistant liners that don't require added lubrication. Mount them on a support rail shaft for applications requiring maximum rigidity.
Self Aligning—Bearings compensate for shaft misalignment. Bearings with 0.0005" shaft clearance are best for precision applications. Bearings with 0.0015" shaft clearance are less likely to bind on your shaft than bearings with 0.0005" shaft clearance.
Frelon liners are stronger and more wear resistant than PTFE liners.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting Holes | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Shaft Clearance | Lg. | Wd. | Ht. | Center Ht. | Wd. | Dynamic Load Capacity | Static Load Capacity, lbs. | Temperature Range, ° F | For Shaft Material | No. of | Dia. | Each | |
Self Aligning | ||||||||||||||
Frelon-Lined 6061 Aluminum Bearings with 6063 Aluminum Housing | ||||||||||||||
| 1/2" | 0.0005" | 1 1/2" | 2" | 1 1/8" | 11/16" | 5/16" | 150 lbs. @ 100 fpm | 1,900 | -400° to 400° | Steel | 4 | 5/32" | 00000000 | 000000 |
| 1/2" | 0.0015" | 1 1/2" | 2" | 1 1/8" | 11/16" | 5/16" | 150 lbs. @ 100 fpm | 1,900 | -400° to 400° | Steel | 4 | 5/32" | 00000000 | 00000 |
| 1/2" | 0.0005" | 3 1/2" | 2" | 1 1/8" | 11/16" | 5/16" | 350 lbs. @ 100 fpm | 3,900 | -400° to 400° | Steel | 8 | 5/32" | 00000000 | 000000 |
| 1/2" | 0.0015" | 3 1/2" | 2" | 1 1/8" | 11/16" | 5/16" | 350 lbs. @ 100 fpm | 3,900 | -400° to 400° | Steel | 8 | 5/32" | 00000000 | 000000 |
| 5/8" | 0.0005" | 1 3/4" | 2 1/2" | 1 7/16" | 7/8" | 3/8" | 200 lbs. @ 100 fpm | 2,900 | -400° to 400° | Steel | 4 | 3/16" | 00000000 | 00000 |
| 5/8" | 0.0015" | 1 3/4" | 2 1/2" | 1 7/16" | 7/8" | 3/8" | 200 lbs. @ 100 fpm | 2,900 | -400° to 400° | Steel | 4 | 3/16" | 00000000 | 00000 |
| 5/8" | 0.0005" | 4" | 2 1/2" | 1 7/16" | 7/8" | 3/8" | 500 lbs. @ 100 fpm | 5,800 | -400° to 400° | Steel | 8 | 3/16" | 00000000 | 000000 |
| 5/8" | 0.0015" | 4" | 2 1/2" | 1 7/16" | 7/8" | 3/8" | 500 lbs. @ 100 fpm | 5,800 | -400° to 400° | Steel | 8 | 3/16" | 00000000 | 000000 |
| 3/4" | 0.0005" | 1 7/8" | 2 3/4" | 1 9/16" | 15/16" | 7/16" | 250 lbs. @ 100 fpm | 3,800 | -400° to 400° | Steel | 4 | 3/16" | 00000000 | 000000 |
| 3/4" | 0.0015" | 1 7/8" | 2 3/4" | 1 9/16" | 15/16" | 7/16" | 250 lbs. @ 100 fpm | 3,800 | -400° to 400° | Steel | 4 | 3/16" | 00000000 | 000000 |
| 3/4" | 0.0005" | 4 1/2" | 2 3/4" | 1 9/16" | 15/16" | 7/16" | 600 lbs. @ 100 fpm | 7,600 | -400° to 400° | Steel | 8 | 3/16" | 00000000 | 000000 |
| 3/4" | 0.0015" | 4 1/2" | 2 3/4" | 1 9/16" | 15/16" | 7/16" | 600 lbs. @ 100 fpm | 7,600 | -400° to 400° | Steel | 8 | 3/16" | 00000000 | 000000 |
| 1" | 0.0005" | 2 5/8" | 3 1/4" | 1 15/16" | 1 3/16" | 9/16" | 500 lbs. @ 100 fpm | 7,000 | -400° to 400° | Steel | 4 | 7/32" | 00000000 | 000000 |
| 1" | 0.0015" | 2 5/8" | 3 1/4" | 1 15/16" | 1 3/16" | 9/16" | 500 lbs. @ 100 fpm | 7,000 | -400° to 400° | Steel | 4 | 7/32" | 00000000 | 000000 |
| 1" | 0.0005" | 6" | 3 1/4" | 1 15/16" | 1 3/16" | 9/16" | 1,000 lbs. @ 100 fpm | 14,000 | -400° to 400° | Steel | 8 | 7/32" | 00000000 | 000000 |
| 1" | 0.0015" | 6" | 3 1/4" | 1 15/16" | 1 3/16" | 9/16" | 1,000 lbs. @ 100 fpm | 14,000 | -400° to 400° | Steel | 8 | 7/32" | 00000000 | 000000 |
| 1 1/4" | 0.0005" | 3 3/8" | 4" | 2 1/2" | 1 1/2" | 5/8" | 800 lbs. @ 100 fpm | 10,000 | -400° to 400° | Steel | 4 | 7/32" | 00000000 | 000000 |
| 1 1/4" | 0.0015" | 3 3/8" | 4" | 2 1/2" | 1 1/2" | 5/8" | 800 lbs. @ 100 fpm | 10,000 | -400° to 400° | Steel | 4 | 7/32" | 00000000 | 000000 |
| 1 1/4" | 0.0005" | 7 1/2" | 4" | 2 1/2" | 1 1/2" | 5/8" | 1,500 lbs. @ 100 fpm | 20,000 | -400° to 400° | Steel | 8 | 7/32" | 00000000 | 000000 |
| 1 1/4" | 0.0015" | 7 1/2" | 4" | 2 1/2" | 1 1/2" | 5/8" | 1,500 lbs. @ 100 fpm | 20,000 | -400° to 400° | Steel | 8 | 7/32" | 00000000 | 000000 |
| 1 1/2" | 0.0005" | 3 3/4" | 4 3/4" | 2 7/8" | 1 3/4" | 3/4" | 1,000 lbs. @ 100 fpm | 14,000 | -400° to 400° | Steel | 4 | 9/32" | 00000000 | 000000 |
| 1 1/2" | 0.0015" | 3 3/4" | 4 3/4" | 2 7/8" | 1 3/4" | 3/4" | 1,000 lbs. @ 100 fpm | 14,000 | -400° to 400° | Steel | 4 | 9/32" | 00000000 | 000000 |
| 1 1/2" | 0.0005" | 9" | 4 3/4" | 2 7/8" | 1 3/4" | 3/4" | 2,500 lbs. @ 100 fpm | 28,000 | -400° to 400° | Steel | 8 | 9/32" | 00000000 | 000000 |
| 1 1/2" | 0.0015" | 9" | 4 3/4" | 2 7/8" | 1 3/4" | 3/4" | 2,500 lbs. @ 100 fpm | 28,000 | -400° to 400° | Steel | 8 | 9/32" | 00000000 | 000000 |
| 2" | 0.0005" | 4 3/4" | 6" | 3 5/8" | 2 1/8" | 1" | 1,500 lbs. @ 100 fpm | 25,000 | -400° to 400° | Steel | 4 | 13/32" | 00000000 | 000000 |
| 2" | 0.0015" | 4 3/4" | 6" | 3 5/8" | 2 1/8" | 1" | 1,500 lbs. @ 100 fpm | 25,000 | -400° to 400° | Steel | 4 | 13/32" | 00000000 | 000000 |
| 2" | 0.0005" | 10" | 6" | 3 5/8" | 2 1/8" | 1" | 4,000 lbs. @ 100 fpm | 50,000 | -400° to 400° | Steel | 8 | 13/32" | 00000000 | 000000 |
| 2" | 0.0015" | 10" | 6" | 3 5/8" | 2 1/8" | 1" | 4,000 lbs. @ 100 fpm | 50,000 | -400° to 400° | Steel | 8 | 13/32" | 00000000 | 000000 |