Search Results
For Shaft Diameter For Shaft Diameter |
|---|
|
|
|
For Shaft Type For Shaft Type |
|---|
 |  |
| Round | Round with Support Rail |
Linear Bearing Component Linear Bearing Component |
|---|
 |  |
| Bearing | Bearing in Housing |
Housing Type Housing Type |
|---|
 | |
| Flange Mount | Base Mount |
ID ID |
|---|
Overall Length Overall Length |
|---|
Bearing Material Bearing Material |
|---|
|
Alignment Style Alignment Style |
|---|
|
For Shaft Material For Shaft Material |
|---|
|
Dynamic Load Capacity Dynamic Load Capacity |
|---|
Static Load Capacity Static Load Capacity |
|---|
|
For Shaft Smoothness For Shaft Smoothness |
|---|
|
For Minimum Steel Shaft Hardness For Minimum SteelShaft Hardness |
|---|
|
Housing Material Housing Material |
|---|
|
For Minimum Housing ID (Inch) For MinimumHousing ID (Inch) |
|---|
|
|
Retaining Ring Groove End-to-End Length Retaining Ring GrooveEnd-to-End Length |
|---|
About Linear Bearings
More
Linear Sleeve Bearings
Frelon-Lined
Bearings are for use with round end-supported shafts. To install, slide bearings into a housing (not included) and secure with two retaining rings (sold individually).
Self Aligning—Bearings compensate for shaft misalignment.
Fixed Alignment—Bearings are for use where shaft misalignment is unlikely. Bearings with 0.0005" shaft clearance are best for precision applications. Bearings with 0.0015" shaft clearance are less likely to bind on your shaft than bearings with 0.0005" shaft clearance.
Frelon-lined bearings are wear and chemical resistant. Aluminum bearings have good corrosion resistance. Note: Not for use with bare aluminum, chrome-plated steel, or 300 series stainless steel shafts. 316 stainless steel bearings have excellent corrosion resistance. Note: Not for use with chrome-plated steel.
For technical drawings and 3-D models, click on a part number.
Fixed Alignment
Bearings | External Retaining Rings | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Shaft Clearance | Overall Lg. | For Housing ID | Retaining Ring Groove End-to-End Lg. | Dynamic Load Capacity | Static Load Capacity, lbs. | Temperature Range, ° F | For Shaft Material | Each | Each | ||
Frelon-Lined 316 Stainless Steel Bearings | ||||||||||||
| 1/4" | 0.0005" | 3/4" | 0.5006" - 0.5017" | 0.519" | 15 lbs. @ 100 fpm | 300 | -400° to 400° | Aluminum, Stainless Steel, Steel | 0000000 | 000000 | 0000000 | 00000 |
| 3/8" | 0.0005" | 7/8" | 0.6256" - 0.6267" | 0.644" | 30 lbs. @ 100 fpm | 510 | -400° to 400° | Aluminum, Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 000 |
| 1/2" | 0.0005" | 1 1/4" | 0.8758" - 0.8771" | 0.971" | 60 lbs. @ 100 fpm | 975 | -400° to 400° | Aluminum, Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 000 |
| 5/8" | 0.0005" | 1 1/2" | 1.1258" - 1.1271" | 1.116" | 90 lbs. @ 100 fpm | 1,400 | -400° to 400° | Aluminum, Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 000 |
| 3/4" | 0.0005" | 1 5/8" | 1.2510" - 1.2525" | 1.178" | 100 lbs. @ 100 fpm | 1,900 | -400° to 400° | Aluminum, Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 000 |
| 1" | 0.0005" | 2 1/4" | 1.5635" - 1.5650" | 1.765" | 200 lbs. @ 100 fpm | 3,500 | -400° to 400° | Aluminum, Stainless Steel, Steel | 0000000 | 00000 | 0000000 | 0000 |
| 1 1/4" | 0.0005" | 2 5/8" | 2.0012" - 2.0030" | 2.015" | 300 lbs. @ 100 fpm | 5,100 | -400° to 400° | Aluminum, Stainless Steel, Steel | 0000000 | 000000 | 0000000 | 0000 |
| 1 1/2" | 0.0005" | 3" | 2.3762" - 2.3780" | 2.428" | 450 lbs. @ 100 fpm | 7,000 | -400° to 400° | Aluminum, Stainless Steel, Steel | 0000000 | 000000 | 0000000 | 0000 |
Frelon-Lined 6061 Aluminum Bearings | ||||||||||||
| 3/16" | 0.0005" | 9/16" | 0.3755" - 0.3764" | 0.435" | 20 lbs. @ 100 fpm | 220 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 000 |
| 3/16" | 0.0015" | 9/16" | 0.3755" - 0.3764" | 0.435" | 20 lbs. @ 100 fpm | 220 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 000 |
| 1/4" | 0.0005" | 3/4" | 0.5006" - 0.5017" | 0.519" | 35 lbs. @ 100 fpm | 600 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 000 |
| 1/4" | 0.0015" | 3/4" | 0.5006" - 0.5017" | 0.519" | 35 lbs. @ 100 fpm | 600 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 000 |
| 3/8" | 0.0005" | 7/8" | 0.6256" - 0.6267" | 0.644" | 60 lbs. @ 100 fpm | 1,000 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 000 |
| 3/8" | 0.0015" | 7/8" | 0.6256" - 0.6267" | 0.644" | 60 lbs. @ 100 fpm | 1,000 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 000 |
| 1/2" | 0.0005" | 1 1/4" | 0.8758" - 0.8771" | 0.971" | 100 lbs. @ 100 fpm | 1,900 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 000 |
| 1/2" | 0.0015" | 1 1/4" | 0.8758" - 0.8771" | 0.971" | 100 lbs. @ 100 fpm | 1,900 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 000 |
| 5/8" | 0.0005" | 1 1/2" | 1.1258" - 1.1271" | 1.116" | 150 lbs. @ 100 fpm | 2,900 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 000 |
| 5/8" | 0.0015" | 1 1/2" | 1.1258" - 1.1271" | 1.116" | 150 lbs. @ 100 fpm | 2,900 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 000 |
| 3/4" | 0.0005" | 1 5/8" | 1.2510" - 1.2525" | 1.178" | 200 lbs. @ 100 fpm | 3,800 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 000 |
| 3/4" | 0.0015" | 1 5/8" | 1.2510" - 1.2525" | 1.178" | 200 lbs. @ 100 fpm | 3,800 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 000 |
| 1" | 0.0005" | 2 1/4" | 1.5635" - 1.5650" | 1.765" | 450 lbs. @ 100 fpm | 7,000 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 0000 |
| 1" | 0.0015" | 2 1/4" | 1.5635" - 1.5650" | 1.765" | 450 lbs. @ 100 fpm | 7,000 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 0000 |
| 1 1/4" | 0.0005" | 2 5/8" | 2.0012" - 2.0030" | 2.015" | 600 lbs. @ 100 fpm | 10,000 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 0000 |
| 1 1/4" | 0.0015" | 2 5/8" | 2.0012" - 2.0030" | 2.015" | 600 lbs. @ 100 fpm | 10,000 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 0000 |
| 1 1/2" | 0.0005" | 3" | 2.3762" - 2.3780" | 2.428" | 900 lbs. @ 100 fpm | 14,000 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 0000 |
| 1 1/2" | 0.0015" | 3" | 2.3762" - 2.3780" | 2.428" | 900 lbs. @ 100 fpm | 14,000 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 0000 |
| 2" | 0.0005" | 4" | 3.0012" - 3.0030" | 3.21" | 1,500 lbs. @ 100 fpm | 25,000 | -400° to 400° | Steel | 00000000 | 000000 | 0000000 | 00000 |
| 2" | 0.0015" | 4" | 3.0012" - 3.0030" | 3.21" | 1,500 lbs. @ 100 fpm | 25,000 | -400° to 400° | Steel | 00000000 | 000000 | 0000000 | 00000 |
Fixed Alignment–Metric
Bearings | External Retaining Rings | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia., mm | Shaft Clearance | Overall Lg., mm | For Housing ID, mm | Retaining Ring Groove End-to-End Lg., mm | Dynamic Load Capacity | Static Load Capacity, lbs. | Temperature Range, ° F | For Shaft Material | Each | Each | ||
Frelon-Lined 6061 Aluminum Bearings | ||||||||||||
| 5 | 0.0005" | 22 | 12.016 - 12.043 | 14.28 | 30 lbs. @ 100 fpm | 510 | -400° to 400° | Steel | 00000000 | 000000 | 0000000 | 00000 |
| 8 | 0.0005" | 25 | 16.016 - 16.043 | 16.28 | 60 lbs. @ 100 fpm | 925 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 000 |
| 12 | 0.0005" | 32 | 22.020 - 22.053 | 22.64 | 100 lbs. @ 100 fpm | 1,700 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 0000 |
| 16 | 0.0005" | 36 | 26.020 - 26.053 | 24.64 | 150 lbs. @ 100 fpm | 2,600 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 0000 |
| 20 | 0.0005" | 45 | 32.025 - 32.064 | 31.26 | 250 lbs. @ 100 fpm | 4,100 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 0000 |
| 25 | 0.0005" | 58 | 40.025 - 40.064 | 43.8 | 400 lbs. @ 100 fpm | 6,700 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 0000 |
| 30 | 0.0005" | 68 | 47.025 - 47.064 | 51.8 | 600 lbs. @ 100 fpm | 9,400 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 0000 |
Linear Sleeve Bearings for Support Rail Shafts
Frelon-Lined
Mount these bearings on a support rail shaft for applications requiring maximum rigidity. To install, slide bearings into a housing (not included) and secure with two retaining rings (sold individually).
Self Aligning—Bearings compensate for shaft misalignment.
Fixed Alignment—Bearings are for use where shaft misalignment is unlikely. Bearings with 0.0005" shaft clearance are best for precision applications. Bearings with 0.0015" shaft clearance are less likely to bind on your shaft than bearings with 0.0005" shaft clearance.
Frelon-lined bearings are wear and chemical resistant. Note: Not for use with bare aluminum, chrome-plated steel, or 300 series stainless steel shafts.
For technical drawings and 3-D models, click on a part number.
Bearings | External Retaining Rings | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Shaft Clearance | Overall Lg. | Wd. | For Housing ID | Retaining Ring Groove End-to-End Lg. | Dynamic Load Cap. | Static Load Cap., lbs. | Temperature Range, ° F | For Shaft Material | Each | Each | ||
Fixed Alignment | |||||||||||||
Frelon-Lined 6061 Aluminum Bearings | |||||||||||||
| 3/8" | 0.0005" | 7/8" | 1/4" | 0.6256" - 0.6267" | 0.644" | 60 lbs. @ 100 fpm | 1,000 | -400° to 400° | Steel | 00000000 | 000000 | 0000000 | 00000 |
| 3/8" | 0.0015" | 7/8" | 1/4" | 0.6256" - 0.6267" | 0.644" | 60 lbs. @ 100 fpm | 1,000 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 000 |
| 1/2" | 0.0005" | 1 1/4" | 5/16" | 0.8758" - 0.8771" | 0.971" | 100 lbs. @ 100 fpm | 1,900 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 000 |
| 1/2" | 0.0015" | 1 1/4" | 5/16" | 0.8758" - 0.8771" | 0.971" | 100 lbs. @ 100 fpm | 1,900 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 000 |
| 5/8" | 0.0005" | 1 1/2" | 3/8" | 1.1258" - 1.1271" | 1.116" | 150 lbs. @ 100 fpm | 2,900 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 000 |
| 5/8" | 0.0015" | 1 1/2" | 3/8" | 1.1258" - 1.1271" | 1.116" | 150 lbs. @ 100 fpm | 2,900 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 000 |
| 3/4" | 0.0005" | 1 5/8" | 7/16" | 1.2510" - 1.2525" | 1.178" | 200 lbs. @ 100 fpm | 3,800 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 000 |
| 3/4" | 0.0015" | 1 5/8" | 7/16" | 1.2510" - 1.2525" | 1.178" | 200 lbs. @ 100 fpm | 3,800 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 000 |
| 1" | 0.0005" | 2 1/4" | 9/16" | 1.5635" - 1.5650" | 1.765" | 450 lbs. @ 100 fpm | 7,000 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 0000 |
| 1" | 0.0015" | 2 1/4" | 9/16" | 1.5635" - 1.5650" | 1.765" | 450 lbs. @ 100 fpm | 7,000 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 0000 |
| 1 1/4" | 0.0005" | 2 5/8" | 5/8" | 2.0012" - 2.0030" | 2.015" | 600 lbs. @ 100 fpm | 10,000 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 0000 |
| 1 1/4" | 0.0015" | 2 5/8" | 5/8" | 2.0012" - 2.0030" | 2.015" | 600 lbs. @ 100 fpm | 10,000 | -400° to 400° | Steel | 00000000 | 00000 | 0000000 | 0000 |
| 1 1/2" | 0.0005" | 3" | 3/4" | 2.3762" - 2.3780" | 2.428" | 900 lbs. @ 100 fpm | 14,000 | -400° to 400° | Steel | 00000000 | 000000 | 0000000 | 0000 |
| 1 1/2" | 0.0015" | 3" | 3/4" | 2.3762" - 2.3780" | 2.428" | 900 lbs. @ 100 fpm | 14,000 | -400° to 400° | Steel | 00000000 | 000000 | 0000000 | 0000 |
| 2" | 0.0005" | 4" | 1" | 3.0012" - 3.0030" | 3.21" | 1,500 lbs. @ 100 fpm | 25,000 | -400° to 400° | Steel | 00000000 | 000000 | 0000000 | 00000 |
| 2" | 0.0015" | 4" | 1" | 3.0012" - 3.0030" | 3.21" | 1,500 lbs. @ 100 fpm | 25,000 | -400° to 400° | Steel | 00000000 | 000000 | 0000000 | 00000 |
Chemical-Resistant Flange-Mounted
Linear Sleeve Bearings
The Frelon liner on these bearings allows them to stand up to a wider range of chemicals than other flange-mounted linear sleeve bearings. All are self-aligning to compensate for shaft misalignment and are for use with round end-supported shafts. Note: Not for use with bare aluminum or chrome-plated shafts.
Bearings with 0.0005" shaft clearance are best for precision applications. Bearings with 0.0015" shaft clearance are less likely to bind on your shaft than bearings with 0.0005" shaft clearance.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting Holes | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Shaft Clearance | Lg. | Wd. | Ht. | Flange Thick. | Bolt Circle Dia. | OD | Dynamic Load Capacity | Static Load Capacity, lbs. | Temperature Range, ° F | For Shaft Material | No. of | Dia. | Each | |
Self Aligning with 0.5° Misalignment Capability | |||||||||||||||
Frelon-Lined 6061 Aluminum Bearings with 6061 Aluminum Housing | |||||||||||||||
| 3/8" | 0.0005" | 1.31" | 1 1/4" | 1 1/4" | 3/16" | 1 13/32" | 7/8" | 90 lbs. @ 100 fpm | 1,000 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 1/8" | 000000000 | 0000000 |
| 3/8" | 0.0015" | 1.31" | 1 1/4" | 1 1/4" | 3/16" | 1 13/32" | 7/8" | 90 lbs. @ 100 fpm | 1,000 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 1/8" | 000000000 | 000000 |
| 1/2" | 0.0005" | 1 11/16" | 1 5/8" | 1 5/8" | 1/4" | 1 3/4" | 1 1/4" | 150 lbs. @ 100 fpm | 1,900 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 3/16" | 000000000 | 00000 |
| 1/2" | 0.0005" | 3 3/8" | 1 5/8" | 1 5/8" | 1/4" | 1 3/4" | 1 1/4" | 300 lbs. @ 100 fpm | 3,900 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 3/16" | 000000000 | 000000 |
| 1/2" | 0.0015" | 1 11/16" | 1 5/8" | 1 5/8" | 1/4" | 1 3/4" | 1 1/4" | 150 lbs. @ 100 fpm | 1,900 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 3/16" | 000000000 | 00000 |
| 1/2" | 0.0015" | 3 3/8" | 1 5/8" | 1 5/8" | 1/4" | 1 3/4" | 1 1/4" | 300 lbs. @ 100 fpm | 3,900 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 3/16" | 000000000 | 000000 |
| 3/4" | 0.0005" | 2 1/16" | 2 3/8" | 2 3/8" | 3/8" | 2 15/32" | 1 3/4" | 300 lbs. @ 100 fpm | 2,900 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 3/16" | 000000000 | 000000 |
| 3/4" | 0.0005" | 4 3/16" | 2 3/8" | 2 3/8" | 3/8" | 2 15/32" | 1 3/4" | 600 lbs. @ 100 fpm | 5,800 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 3/16" | 000000000 | 000000 |
| 3/4" | 0.0015" | 2 1/16" | 2 3/8" | 2 3/8" | 3/8" | 2 15/32" | 1 3/4" | 300 lbs. @ 100 fpm | 2,900 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 3/16" | 000000000 | 000000 |
| 3/4" | 0.0015" | 4 3/16" | 2 3/8" | 2 3/8" | 3/8" | 2 15/32" | 1 3/4" | 600 lbs. @ 100 fpm | 5,800 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 3/16" | 000000000 | 000000 |
| 1" | 0.0005" | 2 13/16" | 2 3/4" | 2 3/4" | 1/2" | 3" | 2 1/4" | 500 lbs. @ 100 fpm | 3,800 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 1/4" | 000000000 | 000000 |
| 1" | 0.0005" | 5 5/8" | 2 3/4" | 2 3/4" | 1/2" | 3" | 2 1/4" | 1,000 lbs. @ 100 fpm | 7,600 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 1/4" | 000000000 | 000000 |
| 1" | 0.0015" | 2 13/16" | 2 3/4" | 2 3/4" | 1/2" | 3" | 2 1/4" | 500 lbs. @ 100 fpm | 3,800 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 1/4" | 000000000 | 000000 |
| 1" | 0.0015" | 5 5/8" | 2 3/4" | 2 3/4" | 1/2" | 3" | 2 1/4" | 1,000 lbs. @ 100 fpm | 7,600 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 1/4" | 000000000 | 000000 |
| 1 1/4" | 0.0005" | 3 5/8" | 3 7/8" | 3 7/8" | 5/8" | 4 7/32" | 2 5/8" | 900 lbs. @ 100 fpm | 10,000 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 3/8" | 000000000 | 000000 |
| 1 1/4" | 0.0015" | 3 5/8" | 3 7/8" | 3 7/8" | 5/8" | 4 7/32" | 2 5/8" | 900 lbs. @ 100 fpm | 10,000 | -400° to 400° | Ceramic-Coated Aluminum, Stainless Steel, Steel | 4 | 3/8" | 000000000 | 000000 |
Mounted Linear Sleeve Bearings
Virtually maintenance free, these bearings have slippery, chemical-resistant liners that don't require added lubrication. All are for use with round end-supported shafts.
Self Aligning—Bearings compensate for shaft misalignment. Bearings with 0.0005" shaft clearance are best for precision applications. Bearings with 0.0015" shaft clearance are less likely to bind on your shaft than bearings with 0.0005" shaft clearance.
Frelon liners are stronger and more wear resistant than PTFE liners.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting Holes | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Shaft Clearance | Lg. | Wd. | Ht. | Center Ht. | Dynamic Load Capacity | Static Load Capacity, lbs. | Temperature Range, ° F | For Shaft Material | No. of | Dia. | Each | |
Self Aligning with 0.5° Misalignment Capability | |||||||||||||
Frelon-Lined 6061 Aluminum Bearings with 6063 Aluminum Housing | |||||||||||||
| 1/4" | 0.0005" | 1 3/16" | 1 5/8" | 13/16" | 7/16" | 50 lbs. @ 100 fpm | 600 | -400° to 400° | Steel | 4 | 5/32" | 00000000 | 000000 |
| 1/4" | 0.0015" | 1 3/16" | 1 5/8" | 13/16" | 7/16" | 50 lbs. @ 100 fpm | 600 | -400° to 400° | Steel | 4 | 5/32" | 00000000 | 00000 |
| 1/4" | 0.0005" | 2 1/2" | 1 5/8" | 13/16" | 7/16" | 100 lbs. @ 100 fpm | 1,200 | -400° to 400° | Steel | 8 | 5/32" | 00000000 | 000000 |
| 1/4" | 0.0015" | 2 1/2" | 1 5/8" | 13/16" | 7/16" | 100 lbs. @ 100 fpm | 1,200 | -400° to 400° | Steel | 8 | 5/32" | 00000000 | 000000 |
| 3/8" | 0.0005" | 1 5/16" | 1 3/4" | 15/16" | 1/2" | 90 lbs. @ 100 fpm | 1,000 | -400° to 400° | Steel | 4 | 5/32" | 00000000 | 00000 |
| 3/8" | 0.0015" | 1 5/16" | 1 3/4" | 15/16" | 1/2" | 90 lbs. @ 100 fpm | 1,000 | -400° to 400° | Steel | 4 | 5/32" | 00000000 | 00000 |
| 3/8" | 0.0005" | 2 3/4" | 1 3/4" | 15/16" | 1/2" | 200 lbs. @ 100 fpm | 2,000 | -400° to 400° | Steel | 8 | 5/32" | 00000000 | 000000 |
| 3/8" | 0.0015" | 2 3/4" | 1 3/4" | 15/16" | 1/2" | 200 lbs. @ 100 fpm | 2,000 | -400° to 400° | Steel | 8 | 5/32" | 00000000 | 000000 |
| 1/2" | 0.0005" | 1 11/16" | 2" | 1 1/4" | 11/16" | 150 lbs. @ 100 fpm | 1,900 | -400° to 400° | Steel | 4 | 5/32" | 00000000 | 00000 |
| 1/2" | 0.0015" | 1 11/16" | 2" | 1 1/4" | 11/16" | 150 lbs. @ 100 fpm | 1,900 | -400° to 400° | Steel | 4 | 5/32" | 00000000 | 00000 |
| 1/2" | 0.0005" | 3 1/2" | 2" | 1 1/4" | 11/16" | 350 lbs. @ 100 fpm | 3,900 | -400° to 400° | Steel | 8 | 5/32" | 00000000 | 000000 |
| 1/2" | 0.0015" | 3 1/2" | 2" | 1 1/4" | 11/16" | 350 lbs. @ 100 fpm | 3,900 | -400° to 400° | Steel | 8 | 5/32" | 00000000 | 000000 |
| 5/8" | 0.0005" | 1 15/16" | 2 1/2" | 1 5/8" | 7/8" | 200 lbs. @ 100 fpm | 2,900 | -400° to 400° | Steel | 4 | 3/16" | 00000000 | 00000 |
| 5/8" | 0.0015" | 1 15/16" | 2 1/2" | 1 5/8" | 7/8" | 200 lbs. @ 100 fpm | 2,900 | -400° to 400° | Steel | 4 | 3/16" | 00000000 | 00000 |
| 5/8" | 0.0005" | 4" | 2 1/2" | 1 5/8" | 7/8" | 500 lbs. @ 100 fpm | 5,800 | -400° to 400° | Steel | 8 | 3/16" | 00000000 | 000000 |
| 5/8" | 0.0015" | 4" | 2 1/2" | 1 5/8" | 7/8" | 500 lbs. @ 100 fpm | 5,800 | -400° to 400° | Steel | 8 | 3/16" | 00000000 | 000000 |
| 3/4" | 0.0005" | 2 1/16" | 2 3/4" | 1 3/4" | 15/16" | 300 lbs. @ 100 fpm | 3,800 | -400° to 400° | Steel | 4 | 3/16" | 00000000 | 00000 |
| 3/4" | 0.0015" | 2 1/16" | 2 3/4" | 1 3/4" | 15/16" | 300 lbs. @ 100 fpm | 3,800 | -400° to 400° | Steel | 4 | 3/16" | 00000000 | 00000 |
| 3/4" | 0.0005" | 4 1/2" | 2 3/4" | 1 3/4" | 15/16" | 600 lbs. @ 100 fpm | 7,600 | -400° to 400° | Steel | 8 | 3/16" | 00000000 | 000000 |
| 3/4" | 0.0015" | 4 1/2" | 2 3/4" | 1 3/4" | 15/16" | 600 lbs. @ 100 fpm | 7,600 | -400° to 400° | Steel | 8 | 3/16" | 00000000 | 000000 |
| 1" | 0.0005" | 2 13/16" | 3 1/4" | 2 3/16" | 1 3/16" | 500 lbs. @ 100 fpm | 7,000 | -400° to 400° | Steel | 4 | 7/32" | 00000000 | 00000 |
| 1" | 0.0015" | 2 13/16" | 3 1/4" | 2 3/16" | 1 3/16" | 500 lbs. @ 100 fpm | 7,000 | -400° to 400° | Steel | 4 | 7/32" | 00000000 | 00000 |
| 1" | 0.0005" | 6" | 3 1/4" | 2 3/16" | 1 3/16" | 1,000 lbs. @ 100 fpm | 14,000 | -400° to 400° | Steel | 8 | 7/32" | 00000000 | 000000 |
| 1" | 0.0015" | 6" | 3 1/4" | 2 3/16" | 1 3/16" | 1,000 lbs. @ 100 fpm | 14,000 | -400° to 400° | Steel | 8 | 7/32" | 00000000 | 000000 |
| 1 1/4" | 0.0005" | 3 5/8" | 4" | 2 13/16" | 1 1/2" | 900 lbs. @ 100 fpm | 10,000 | -400° to 400° | Steel | 4 | 7/32" | 00000000 | 000000 |
| 1 1/4" | 0.0015" | 3 5/8" | 4" | 2 13/16" | 1 1/2" | 900 lbs. @ 100 fpm | 10,000 | -400° to 400° | Steel | 4 | 7/32" | 00000000 | 000000 |
| 1 1/4" | 0.0005" | 7 1/2" | 4" | 2 13/16" | 1 1/2" | 1,500 lbs. @ 100 fpm | 20,000 | -400° to 400° | Steel | 8 | 7/32" | 00000000 | 000000 |
| 1 1/4" | 0.0015" | 7 1/2" | 4" | 2 13/16" | 1 1/2" | 1,500 lbs. @ 100 fpm | 20,000 | -400° to 400° | Steel | 8 | 7/32" | 00000000 | 000000 |
| 1 1/2" | 0.0005" | 4" | 4 3/4" | 3 1/4" | 1 3/4" | 1,000 lbs. @ 100 fpm | 14,000 | -400° to 400° | Steel | 4 | 9/32" | 00000000 | 000000 |
| 1 1/2" | 0.0015" | 4" | 4 3/4" | 3 1/4" | 1 3/4" | 1,000 lbs. @ 100 fpm | 14,000 | -400° to 400° | Steel | 4 | 9/32" | 00000000 | 000000 |
| 1 1/2" | 0.0005" | 9" | 4 3/4" | 3 1/4" | 1 3/4" | 2,500 lbs. @ 100 fpm | 28,000 | -400° to 400° | Steel | 8 | 9/32" | 00000000 | 000000 |
| 1 1/2" | 0.0015" | 9" | 4 3/4" | 3 1/4" | 1 3/4" | 2,500 lbs. @ 100 fpm | 28,000 | -400° to 400° | Steel | 8 | 9/32" | 00000000 | 000000 |
| 2" | 0.0005" | 5" | 6" | 4 1/16" | 2 1/8" | 2,000 lbs. @ 100 fpm | 25,000 | -400° to 400° | Steel | 4 | 13/32" | 00000000 | 000000 |
| 2" | 0.0015" | 5" | 6" | 4 1/16" | 2 1/8" | 2,000 lbs. @ 100 fpm | 25,000 | -400° to 400° | Steel | 4 | 13/32" | 00000000 | 000000 |
| 2" | 0.0005" | 10" | 6" | 4 1/16" | 2 1/8" | 4,000 lbs. @ 100 fpm | 50,000 | -400° to 400° | Steel | 8 | 13/32" | 00000000 | 000000 |
| 2" | 0.0015" | 10" | 6" | 4 1/16" | 2 1/8" | 4,000 lbs. @ 100 fpm | 50,000 | -400° to 400° | Steel | 8 | 13/32" | 00000000 | 000000 |
Mounted Linear Sleeve Bearings for Support Rail Shafts
Virtually maintenance free, these bearings have slippery, chemical-resistant liners that don't require added lubrication. All are for use with round end-supported shafts.
Self Aligning—Bearings compensate for shaft misalignment. Bearings with 0.0005" shaft clearance are best for precision applications. Bearings with 0.0015" shaft clearance are less likely to bind on your shaft than bearings with 0.0005" shaft clearance.
Fixed Alignment—Bearings are for use where shaft misalignment is unlikely.
Frelon liners are stronger and more wear resistant than PTFE liners.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting Holes | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Shaft Clearance | Lg. | Wd. | Ht. | Center Ht. | Wd. | Dynamic Load Capacity | Static Load Capacity, lbs. | Temperature Range, ° F | For Shaft Material | No. of | Dia. | Each | |
Self Aligning | ||||||||||||||
Frelon-Lined 6061 Aluminum Bearings with 6063 Aluminum Housing | ||||||||||||||
| 1/2" | 0.0005" | 1 1/2" | 2" | 1 1/8" | 11/16" | 5/16" | 150 lbs. @ 100 fpm | 1,900 | -400° to 400° | Steel | 4 | 5/32" | 00000000 | 000000 |
| 1/2" | 0.0015" | 1 1/2" | 2" | 1 1/8" | 11/16" | 5/16" | 150 lbs. @ 100 fpm | 1,900 | -400° to 400° | Steel | 4 | 5/32" | 00000000 | 00000 |
| 1/2" | 0.0005" | 3 1/2" | 2" | 1 1/8" | 11/16" | 5/16" | 350 lbs. @ 100 fpm | 3,900 | -400° to 400° | Steel | 8 | 5/32" | 00000000 | 000000 |
| 1/2" | 0.0015" | 3 1/2" | 2" | 1 1/8" | 11/16" | 5/16" | 350 lbs. @ 100 fpm | 3,900 | -400° to 400° | Steel | 8 | 5/32" | 00000000 | 000000 |
| 5/8" | 0.0005" | 1 3/4" | 2 1/2" | 1 7/16" | 7/8" | 3/8" | 200 lbs. @ 100 fpm | 2,900 | -400° to 400° | Steel | 4 | 3/16" | 00000000 | 00000 |
| 5/8" | 0.0015" | 1 3/4" | 2 1/2" | 1 7/16" | 7/8" | 3/8" | 200 lbs. @ 100 fpm | 2,900 | -400° to 400° | Steel | 4 | 3/16" | 00000000 | 00000 |
| 5/8" | 0.0005" | 4" | 2 1/2" | 1 7/16" | 7/8" | 3/8" | 500 lbs. @ 100 fpm | 5,800 | -400° to 400° | Steel | 8 | 3/16" | 00000000 | 000000 |
| 5/8" | 0.0015" | 4" | 2 1/2" | 1 7/16" | 7/8" | 3/8" | 500 lbs. @ 100 fpm | 5,800 | -400° to 400° | Steel | 8 | 3/16" | 00000000 | 000000 |
| 3/4" | 0.0005" | 1 7/8" | 2 3/4" | 1 9/16" | 15/16" | 7/16" | 250 lbs. @ 100 fpm | 3,800 | -400° to 400° | Steel | 4 | 3/16" | 00000000 | 00000 |
| 3/4" | 0.0015" | 1 7/8" | 2 3/4" | 1 9/16" | 15/16" | 7/16" | 250 lbs. @ 100 fpm | 3,800 | -400° to 400° | Steel | 4 | 3/16" | 00000000 | 00000 |
| 3/4" | 0.0005" | 4 1/2" | 2 3/4" | 1 9/16" | 15/16" | 7/16" | 600 lbs. @ 100 fpm | 7,600 | -400° to 400° | Steel | 8 | 3/16" | 00000000 | 000000 |
| 3/4" | 0.0015" | 4 1/2" | 2 3/4" | 1 9/16" | 15/16" | 7/16" | 600 lbs. @ 100 fpm | 7,600 | -400° to 400° | Steel | 8 | 3/16" | 00000000 | 000000 |
| 1" | 0.0005" | 2 5/8" | 3 1/4" | 1 15/16" | 1 3/16" | 9/16" | 500 lbs. @ 100 fpm | 7,000 | -400° to 400° | Steel | 4 | 7/32" | 00000000 | 000000 |
| 1" | 0.0015" | 2 5/8" | 3 1/4" | 1 15/16" | 1 3/16" | 9/16" | 500 lbs. @ 100 fpm | 7,000 | -400° to 400° | Steel | 4 | 7/32" | 00000000 | 000000 |
| 1" | 0.0005" | 6" | 3 1/4" | 1 15/16" | 1 3/16" | 9/16" | 1,000 lbs. @ 100 fpm | 14,000 | -400° to 400° | Steel | 8 | 7/32" | 00000000 | 000000 |
| 1" | 0.0015" | 6" | 3 1/4" | 1 15/16" | 1 3/16" | 9/16" | 1,000 lbs. @ 100 fpm | 14,000 | -400° to 400° | Steel | 8 | 7/32" | 00000000 | 000000 |
| 1 1/4" | 0.0005" | 3 3/8" | 4" | 2 1/2" | 1 1/2" | 5/8" | 800 lbs. @ 100 fpm | 10,000 | -400° to 400° | Steel | 4 | 7/32" | 00000000 | 000000 |
| 1 1/4" | 0.0015" | 3 3/8" | 4" | 2 1/2" | 1 1/2" | 5/8" | 800 lbs. @ 100 fpm | 10,000 | -400° to 400° | Steel | 4 | 7/32" | 00000000 | 000000 |
| 1 1/4" | 0.0005" | 7 1/2" | 4" | 2 1/2" | 1 1/2" | 5/8" | 1,500 lbs. @ 100 fpm | 20,000 | -400° to 400° | Steel | 8 | 7/32" | 00000000 | 000000 |
| 1 1/4" | 0.0015" | 7 1/2" | 4" | 2 1/2" | 1 1/2" | 5/8" | 1,500 lbs. @ 100 fpm | 20,000 | -400° to 400° | Steel | 8 | 7/32" | 00000000 | 000000 |
| 1 1/2" | 0.0005" | 3 3/4" | 4 3/4" | 2 7/8" | 1 3/4" | 3/4" | 1,000 lbs. @ 100 fpm | 14,000 | -400° to 400° | Steel | 4 | 9/32" | 00000000 | 000000 |
| 1 1/2" | 0.0015" | 3 3/4" | 4 3/4" | 2 7/8" | 1 3/4" | 3/4" | 1,000 lbs. @ 100 fpm | 14,000 | -400° to 400° | Steel | 4 | 9/32" | 00000000 | 000000 |
| 1 1/2" | 0.0005" | 9" | 4 3/4" | 2 7/8" | 1 3/4" | 3/4" | 2,500 lbs. @ 100 fpm | 28,000 | -400° to 400° | Steel | 8 | 9/32" | 00000000 | 000000 |
| 1 1/2" | 0.0015" | 9" | 4 3/4" | 2 7/8" | 1 3/4" | 3/4" | 2,500 lbs. @ 100 fpm | 28,000 | -400° to 400° | Steel | 8 | 9/32" | 00000000 | 000000 |
| 2" | 0.0005" | 4 3/4" | 6" | 3 5/8" | 2 1/8" | 1" | 1,500 lbs. @ 100 fpm | 25,000 | -400° to 400° | Steel | 4 | 13/32" | 00000000 | 000000 |
| 2" | 0.0015" | 4 3/4" | 6" | 3 5/8" | 2 1/8" | 1" | 1,500 lbs. @ 100 fpm | 25,000 | -400° to 400° | Steel | 4 | 13/32" | 00000000 | 000000 |
| 2" | 0.0005" | 10" | 6" | 3 5/8" | 2 1/8" | 1" | 4,000 lbs. @ 100 fpm | 50,000 | -400° to 400° | Steel | 8 | 13/32" | 00000000 | 000000 |
| 2" | 0.0015" | 10" | 6" | 3 5/8" | 2 1/8" | 1" | 4,000 lbs. @ 100 fpm | 50,000 | -400° to 400° | Steel | 8 | 13/32" | 00000000 | 000000 |