For Use With For Use With |
|---|
|
|
For Tank Depth For Tank Depth |
|---|
Mounting Orientation Mounting Orientation |
|---|
|
For Container Type For Container Type |
|---|
|
Float Material Float Material |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Float Rod Material Float Rod Material |
|---|
|
About Flowmeters and Totalizers
Flowmeters measure the rate of flow for a liquid or a gas. Totalizers measure the cumulative flow volume. Flowmeter/totalizers display both the flow rate and the cumulative flow volume.
More
Vertical-Mount Fuel-Level Gauges for Tanks
Install these gauges through the top of your tank to monitor diesel fuel, fuel oil, or gasoline level.
Gauges with float rods are UL Listed for flammable liquids. For shallower tanks, cut the float rod ½” to 1” shorter than your tank depth to prevent it from touching the bottom.
Optional remote-reading dials use two wires to send a signal to a receiver or dashboard for monitoring fuel levels remotely.
Brass Center Shaft
Aluminum Float Rod
Replacement Dial
Gauges | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Temp. Range, °F | Replacement Dials | ||||||||||||||||
| For Tank Dp. | Pipe Size  | Thread Type | Gender | Dial Dia. | Max. Pressure, psi | Min. | Max. | For Container Type | Float Material | Guide Rod Material | Dial Material | Graduation Marks | Features | Each | Each | ||
Brass Center Shaft | |||||||||||||||||
| 8" | 1 1/2 | NPT | Male | 2 5/16" | 25 | -40° | 155° | Open Tank | Buna-N Rubber | Zinc-Plated Steel | Zinc | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | Plastic Lens | 0000000 | 000000 | 0000000 | 000000 |
| 12" | 1 1/2 | NPT | Male | 2 5/16" | 25 | -40° | 155° | Open Tank | Buna-N Rubber | Zinc-Plated Steel | Zinc | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | Plastic Lens | 0000000 | 00000 | 0000000 | 00000 |
| 18" | 1 1/2 | NPT | Male | 2 5/16" | 25 | -40° | 155° | Open Tank | Buna-N Rubber | Zinc-Plated Steel | Zinc | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | Plastic Lens | 0000000 | 00000 | 0000000 | 00000 |
| 19 1/2" | 1 1/2 | NPT | Male | 2 5/16" | 25 | -40° | 155° | Open Tank | Buna-N Rubber | Zinc-Plated Steel | Zinc | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | Plastic Lens | 0000000 | 00000 | 0000000 | 00000 |
| 24" | 1 1/2 | NPT | Male | 2 5/16" | 25 | -40° | 155° | Open Tank | Buna-N Rubber | Zinc-Plated Steel | Zinc | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | Plastic Lens | 0000000 | 00000 | 0000000 | 00000 |
| 27" | 1 1/2 | NPT | Male | 2 5/16" | 25 | -40° | 155° | Open Tank | Buna-N Rubber | Zinc-Plated Steel | Zinc | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | Plastic Lens | 0000000 | 00000 | 0000000 | 00000 |
| 30" | 1 1/2 | NPT | Male | 2 5/16" | 25 | -40° | 155° | Open Tank | Buna-N Rubber | Zinc-Plated Steel | Zinc | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | Plastic Lens | 0000000 | 000000 | 0000000 | 00000 |
| 36" | 1 1/2 | NPT | Male | 2 5/16" | 25 | -40° | 155° | Open Tank | Buna-N Rubber | Zinc-Plated Steel | Zinc | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | Plastic Lens | 0000000 | 000000 | 0000000 | 00000 |
Aluminum Float Rod | |||||||||||||||||
| 36" | 1 1/2 | NPT | Male | 2 5/16" | 25 | -40° | 155° | Open Tank | Buna-N Rubber | __ | Zinc | Full, 3/4, 1/2, 1/4, Empty | Plastic Lens | 0000000 | 000000 | 0000000 | 00000 |
| 36" | 2 | NPT | Male | 2 5/16" | 25 | -40° | 155° | Open Tank | Buna-N Rubber | __ | Zinc | Full, 3/4, 1/2, 1/4, Empty | Plastic Lens | 0000000 | 000000 | 0000000 | 00000 |
Optional Dials for Gauges with Brass Center Shafts
Optional Remote-Reading Dial
| Component | Each | |
| Remote-Reading Dial | 0000000 | 0000000 |
Vertical-Mount Liquid-Level Gauges for Tanks
For use with water, hydraulic fluid, and diesel fuel, install these gauges through the top of your tank.
Temp. Range, °F | 1 1/2 NPT Male | 2 NPT Male | |||||||
|---|---|---|---|---|---|---|---|---|---|
| For Tank Dp. | Max. Pressure, psi | Min. | Max. | Float Material | Graduation Marks | Each | Each | ||
Zinc-Plated Steel Float Rod | |||||||||
| 6" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 000000 | 00000000 | 000000 |
| 7" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 8" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 9" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 10" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 11" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 12" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 13" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 14" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 15" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 16" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 17" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 18" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 19" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 20" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 21" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 22" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 23" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 24" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 25" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 26" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 27" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 28" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 29" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 30" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 31" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 32" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 33" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 34" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 35" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 36" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 37" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 38" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 39" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 40" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 41" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 42" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 43" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 44" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 45" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 46" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 47" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 48" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 49" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 50" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 51" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 52" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 53" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 54" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 55" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 56" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 57" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 58" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 59" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 60" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 61" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 62" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 63" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 64" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 65" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 66" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 67" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 68" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 69" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 70" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 71" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
| 72" | 70 | -20° | 110° | Polyethylene Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 00000000 | 00000 | 00000000 | 00000 |
Horizontal-Mount Fuel-Level Gauges for Tanks
Mount these gauges on the flat end of a horizontal, cylindrical tank to monitor diesel fuel, fuel oil, or gasoline level. They are UL listed for flammable liquids. For shallower tanks, cut the rod ½” to 1” shorter than your tank depth to prevent it from touching the bottom.
Temp. Range, °F | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Tank Dp. | Pipe Size | Thread Type | Gender | Dial Dia. | Max. Pressure, psi | Min. | Max. | For Container Type | Float Material | Dial Material | Graduation Marks | Features | Each | |
Aluminum Float Rod | ||||||||||||||
| 21 1/2" | 1 1/2 | NPT | Male | 2 5/16" | 10 | -40° | 155° | Open Tank | Buna-N Rubber | Zinc | Full, 3/4, 1/2, 1/4, Empty | Plastic Lens | 0000000 | 000000 |
| 25" | 1 1/4 | NPT | Male | 2 5/16" | 10 | -40° | 155° | Open Tank | Buna-N Rubber | Zinc | Full, 3/4, 1/2, 1/4, Empty | Plastic Lens | 0000000 | 00000 |
Precision Liquid-Level Gauges for Tanks
For precise measurement of water, hydraulic fluid, or diesel fuel level, this gauge provides level readings down to 1/8". The small hand on the dial displays feet, and the large hand displays inches. It comes with decals to mark high and low levels.
Temp. Range, °F | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Tank Dp., ft. | For Min. Liquid Level | Pipe Size | Thread Type | Gender | Overall Ht. | Dial Dia. | Float Lg. | Max. Pressure, psi | Min. | Max. | For Container Type | Float Material | Housing Material | Dial Material | Cable Material | Graduation Marks | Each | |
| 12 | 1/8" | 2 | NPT | Male | 8 7/16" | 6" | 7 7/8" | 5 | 0° | 120° | Open Tank | 304 Stainless Steel | Aluminum | Aluminum | 304 Stainless Steel | 1/8" | 0000000 | 0000000 |
Liquid-Level Gauges for Drums
Vertical Mount
Horizontal Mount
Measure water, hydraulic fluid, or diesel fuel level in your drum.
Gauges with 316 stainless steel float rods are more corrosion resistant than gauges with zinc-plated steel float rods.
Vertical-mount gauges install through the top opening of your drum. They measure your liquid in gallons, liters, and volume fractions.
Horizontal-mount gauges install by attaching one pipe connection to the opening of a horizontal drum. Attach a drain or valve to the pipe connection on the other end. They have sliding markers for calibration and measure your liquid in gallons and liters.
Overall | Temp. Range, °F | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Drum Capacity, gal. | For Drum Dp. | Pipe Size | Thread Type | Gender | Dp. | Ht. | Window Ht. | Max. Pressure, psi | Min. | Max. | Float Material | Housing Material | Window Material | Graduation Marks | Each | |
Vertical Mount | ||||||||||||||||
Zinc-Plated Steel Float Rod | ||||||||||||||||
| 30 | 27 1/2" | 3/4 | NPT | Male | 2 1/2" | 18 1/2" | 3" | 70 | -20° | 110° | Buna-N Rubber | Cellulose Acetate Plastic | Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 0000000 | 000000 |
| 30 | 27 1/2" | 2 | NPT | Male | 2 1/2" | 18 1/2" | 3" | 70 | -20° | 110° | Polyethylene Plastic | Cellulose Acetate Plastic | Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 0000000 | 00000 |
| 55 | 33 1/2" | 3/4 | NPT | Male | 2 1/2" | 21 1/2" | 3" | 70 | -20° | 110° | Buna-N Rubber | Cellulose Acetate Plastic | Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 0000000 | 00000 |
| 55 | 33 1/2" | 2 | NPT | Male | 2 1/2" | 21 1/2" | 3" | 70 | -20° | 110° | Polyethylene Plastic | Cellulose Acetate Plastic | Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 0000000 | 00000 |
316 Stainless Steel Float Rod | ||||||||||||||||
| 30 | 27 1/2" | 3/4 | NPT | Male | 2 1/2" | 18 1/2" | 3" | 70 | -20° | 110° | Buna-N Rubber | Cellulose Acetate Plastic | Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 0000000 | 000000 |
| 30 | 27 1/2" | 2 | NPT | Male | 2 1/2" | 18 1/2" | 3" | 70 | -20° | 110° | Polyethylene Plastic | Cellulose Acetate Plastic | Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 0000000 | 000000 |
| 55 | 33 1/2" | 3/4 | NPT | Male | 2 1/2" | 21 1/2" | 3" | 70 | -20° | 110° | Buna-N Rubber | Cellulose Acetate Plastic | Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 0000000 | 000000 |
| 55 | 33 1/2" | 2 | NPT | Male | 2 1/2" | 21 1/2" | 3" | 70 | -20° | 110° | Polyethylene Plastic | Cellulose Acetate Plastic | Plastic | Full, 7/8, 3/4, 5/8, 1/2, 3/8, 1/4, 1/8, Empty | 0000000 | 000000 |
Horizontal Mount | ||||||||||||||||
Steel Fitting | ||||||||||||||||
| 55 | __ | 3/4 | NPT | Male | 4 1/2" | 22 1/8" | 19 5/8" | Not Rated | 35° | 150° | __ | Aluminum | Glass | 5, 1 | 0000000 | 00000 |
PVC Plastic Fitting | ||||||||||||||||
| 55 | __ | 3/4 | NPT | Male | 4" | 22 1/8" | 19 5/8" | Not Rated | 40° | 140° | __ | Aluminum | Glass | 5, 1 | 0000000 | 00000 |
304 Stainless Steel Fitting | ||||||||||||||||
| 55 | __ | 3/4 | NPT | Male | 4 1/2" | 22 1/8" | 19 5/8" | Not Rated | 35° | 150° | __ | Aluminum | Glass | 5, 1 | 0000000 | 00000 |
High-Accuracy Totalizers for Fuel
More than twice as accurate as standard totalizers for fuel, these measure the total flow volume of gasoline, diesel fuel, and kerosene with ±2% accuracy. They display a resettable batch total volume to keep track of one metering application and a nonresettable total flow volume. The mesh strainer traps debris.
| Pipe Connections | Flow Range | Accuracy | Max. Total Volume | Max. Batch Volume | Max. Pressure | Temp. Range, °F | Seal Material | Mounting Orientation | Display Type | Ht. | Wd. | Dp. | Features | Each | |
Aluminum Body | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Gallons | |||||||||||||||
| 1 NPT Female | 5 to 30 gpm | ±2% | 999,999.9 gallons | 999.9 | 50 psi @ 70° F | -20° to 125° | Buna-N Rubber | Horizontal, Vertical | Analog | 8" | 6" | 5 1/4" | Mesh Strainer, Resettable Batch Function | 0000000 | 0000000 |
Liters | |||||||||||||||
| 1 NPT Female | 19 to 114 lpm | ±2% | 999,999.9 liters | 999.9 | 50 psi @ 70° F | -20° to 125° | Buna-N Rubber | Horizontal, Vertical | Analog | 8" | 6" | 5 1/4" | Mesh Strainer, Resettable Batch Function | 0000000 | 000000 |