Track batches and the total amount of gasoline, diesel fuel, and kerosene passing through your system.

A digital display makes it easy to check both the total amount of liquid that’s flowed through and the batch total.

Use these totalizers to measure the total amount of liquid up to 200° F flowing through your pipe system.

Flanged ends let you securely integrate these totalizers into large drinking water pipelines to measure the cumulative amount of water flowing through them.

Often used in hard-to-access areas, these totalizers let you monitor the total amount of drinking water flowing through them up to 250 feet away.

Often used in heating, cooking, and power-generating systems, these totalizers measure the total amount of natural gas, propane, and butane that flow through them.

Determine the flow rate and total volume of liquid flowing through your system with the same meter.

Often used in hard-to-access areas, these flowmeter/totalizers have a display that can be placed up to 25 feet from the sensor. They connect to unthreaded PVC pipe.

With one meter, these flowmeter/totalizers measure the flow rate and total flow volume of high-temperature liquid up to 200° F.

Check the flow rate of liquids in your system.

Easily install the unthreaded ends of these flowmeters into a PVC piping system.

Monitor the flow rate of liquids and use the integrated switch to turn equipment on and off, or activate an alarm when liquid reaches a set flow rate.

Check the flow rate of liquids up to 200° F from an easy-to-read digital display instead of a scale or dial.

Liquids with particles up to 1/8" in diameter won't clog this flowmeter.

A 304 stainless steel case protects these flowmeters from blows that could shatter the glass body.

Install these flowmeters in an instrument panel to measure the flow rate of hot water and other liquids reaching up to 212° F.

Often used to pinpoint flow issues, these flowmeters clamp onto pipe, so you can spot-check the flow rate at different points without disassembling your system. They measure by tracking the time it takes for ultrasonic waves to pass through your liquid, so they don’t need to come into contact with your liquid.

With a spring piston instead of a float, these flowmeters measure the flow rate of oil in any mounting orientation.

Measure the flow rate of gases in applications where pressure fluctuates, such as compressed air systems.

Instead of a scale, these flowmeters have a large dial that makes it easy to read the flow rate of your gas from a distance.

Instead of a scale calibrated to a specific gas’ flow rate, these flowmeters measure in millimeters and include a conversion chart, so you can check the flow rate of water and multiple gases without any calculations.

With a stainless steel float and float rod, these gauges resist corroding from chemicals.

Install these gauges through the top of your tank to monitor diesel, fuel oil, or gasoline level.

Measure water, hydraulic fluid, or diesel fuel level in your drum.

Avoid overfilling—these indicators pop up when your tank is almost full.

Check the level of liquids containing chemicals such as alcohol-based solvents, boric acid, and sodium bicarbonate.

Simultaneously monitor the hydraulic fluid or oil level and temperature in gear boxes, crank cases, and other reservoirs.

The nylon body and window make these indicators shatter resistant.

Monitor hydraulic fluid or oil level in gear boxes, crank cases, and other reservoirs.

Monitor hydraulic fluid or oil level in pressurized applications, such as hydraulic systems where overflow is a concern.

These gauges have a liquid-filled dial that reduces needle flutter in high-vibration applications reaching 2,000 psi.