Take these burners anywhere they can hook up to a propane tank. They are designed for outdoor use. Burners require a low-pressure gas regulator (not included).

Control the flow while dispensing diesel fuel. Nozzles are aluminum, which is lightweight with good corrosion resistance.

Nozzles with automatic shut-off will stop dispensing when the tank is full or if the nozzle falls from the tank. They have a built-in check valve that reduces spillage when withdrawing the nozzle from tank. Nozzles have an angled design, which reduces hose kinking for efficient fueling. They come with a plastic scuff guard to protect the nozzle from damage.

Nozzles with manual shut-off have a trigger to stop the flow. Do not leave the nozzle unattended when in use.

Nozzles with three-position hold-open clip allow you to dispense fuel without holding the trigger.

Style A is also known as a service-station-style nozzle. The nozzle tip has a stream straightener (also known as a stream shaper), which reduces turbulence for less spillage. Attach an optional splash guard (sold separately) to protect your hands from spray.

Styles B and C are also known as truck-stop nozzles. They have higher flow rates than Style A to dispense large quantities of fuel quickly. Style C includes a splash guard to protect your hands from spray.

Style D has the largest spout and the highest flow rate of all the nozzles for use with trucks, buses, and other heavy-duty bulk fueling applications.

Use hold-open clip kits to replace a broken clip. Install with pliers.

For technical drawings and 3-D models, click on a part number.

Nozzles allow you to control the flow while dispensing hydraulic fluid. They shut off manually, so you’ll have to release the trigger to stop the flow. Nozzles are aluminum, which is lightweight with good corrosion resistance.

Style A has a larger spout and a higher flow rate than Style B to dispense large quantities of hydraulic fluid quickly.

Style B is UL listed. It has an angled design, which reduces hose kinking for efficient fueling.

Warning: Do not leave nozzles unattended when in use.

For technical drawings and 3-D models, click on a part number.

These nozzles let you adjust the flow while dispensing gasoline. They are also known as service-station-style nozzles. Nozzles will shut off automatically when the tank is full or if the nozzle falls from the tank. They have a built-in check valve to reduce spillage when withdrawing the nozzle from tank. The nozzle tip has a stream straightener (also known as a stream shaper), which reduces turbulence for less spillage. A plastic scuff guard protects the nozzle from damage. Attach an optional splash guard (sold separately) to protect your hands from spray. Nozzles are aluminum, which is lightweight with good corrosion resistance.

Nozzles with three-position hold-open clip allow you to dispense fuel without holding the trigger.

Use hold-open clip kits to replace a broken clip. Install with pliers.

For technical drawings and 3-D models, click on a part number.

Connect these swivels to the threaded end of your dispensing hose. They rotate before and after installation as needed to prevent hose from twisting, kinking, and wearing prematurely.

Aluminum swivels are lighter in weight than brass swivels. Anodized aluminum swivels have better corrosion resistance than uncoated aluminum. Chrome-plated brass swivels have comparable corrosion resistance to anodized aluminum swivels, but are softer, so they’re easier to thread together. They have a bright, shiny appearance.

Straight swivels rotate at the female connection point only; they are also known as inline swivels.

45° offset swivels rotate at the male connection point and at the elbow. They are UL listed.

For technical drawings and 3-D models, click on a part number.

Fill tanks and recharge struts—these couplers join hose to high-pressure fill valves with Schrader threads.

Some couplers meet SAE AS4395, an automotive industry standard for flared fitting dimensions.

70° elbow couplers are angled to access hard-to-reach valves.

Couplers with a shut-off valve let you control the flow of air by hand. When used with Schrader valves that have a core, the core depressor pin in these couplers press valves open to let air flow in.

For technical drawings and 3-D models, click on a part number.

Styles A and B come with three interchangeable, color-coded identification buttons: orange for air, blue for gas, and yellow for vacuum.