Voltage Voltage |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
For Use With For Use With |
|---|
|
|
Airflow @ Static Pressure Airflow @ Static Pressure |
|---|
Current Current |
|---|
Overall Depth Overall Depth |
|---|
|
|
|
About Calculating the Airflow Required for Air Cleaning
More
About Duct Connections
More
Chemical-Resistant Duct and Fittings
Made of PVC plastic to withstand acids, alkalies, salts, and other corrosive vapors and fumes. Use PVC pipe cement (not included) to secure components. Fittings have female ends with a slightly larger diameter to press-fit over duct.
For technical drawings and 3-D models, click on a part number.
Suspended-Hood Fume Exhausters
Position these exhausters above drums, tanks, and distillers to remove fumes, vapors, and fine dust particles from your space. All include a pulley system to adjust the hood height. Add an optional swivel wall bracket (sold separately) for side-to-side movement.
Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.
Exhausters | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Hose | Optional Swivel Wall Bracket | ||||||||||
| Hood Dia. | Airflow @ Static Pressure | Volume | Power, hp | ID | Lg., ft. | Mounting Location | Includes | Each | Each | ||
120V AC—Plug | |||||||||||
| 27" | 400 cfm @ 0 in. of H₂O | 50 dB @ 15 ft. | 1/8 | 6" | 10 | Ceiling, Wall | Blower, Outside Vent Kit | 00000000 | 0000000 | 00000000 | 0000000 |
| 32" | 400 cfm @ 0 in. of H₂O | 50 dB @ 15 ft. | 1/8 | 6" | 10 | Ceiling, Wall | Blower, Outside Vent Kit | 00000000 | 000000 | 00000000 | 000000 |
| 37" | 400 cfm @ 0 in. of H₂O | 50 dB @ 15 ft. | 1/8 | 6" | 10 | Ceiling, Wall | Blower, Outside Vent Kit | 00000000 | 000000 | 00000000 | 000000 |
| 44" | 400 cfm @ 0 in. of H₂O | 50 dB @ 15 ft. | 1/8 | 6" | 10 | Ceiling, Wall | Blower, Outside Vent Kit | 00000000 | 000000 | 00000000 | 000000 |
Floor-Mount Fume Exhausters
Remove fumes, vapors, and fine dust particles from your space. These exhausters are commonly used in welding, soldering, and other operations that create fumes.
Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.
Totally enclosed exhausters have an external fan for cooling. These exhausters offer more protection than open dripproof exhausters. They can be used in dirty, dusty, and damp environments, but are not airtight.
Single-duct kits (sold separately) maximize airflow at one fume collection point. They include a hose, a nozzle, and two clamps.
Double-duct kits (sold separately) create two points for fume collection, although each will have lower airflow than the one collection point of a single-duct kit. These kits include two hoses, two nozzles, four clamps, and a wye connector.
Overall | Mounting | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Airflow @ Static Pressure | Volume | Power, hp | Inlet Dia. | Outlet Dia. | Ht. | Wd. | Dp. | Housing Material | Base Material | Fasteners Included | For Screw Size | Hole Dia. | Number of Holes | Each | |
Totally Enclosed | |||||||||||||||
120V AC,Single Phase—Plug | |||||||||||||||
| 350 cfm @ 1/2 in. of H₂O | 68 dB @ 15 ft. | 1/2 | 4" | 4" | 18 7/8" | 15 3/8" | 15 1/4" | Black Powder-Coated Steel | Steel | No | 3/8" | 7/16" | 4 | 00000000 | 0000000 |
| 450 cfm @ 1/2 in. of H₂O | 64 dB @ 15 ft. | 1/4 | 6" | 6" | 16 3/8" | 12 1/4" | 16" | Aluminum | Steel | No | 3/8" | 7/16" | 4 | 00000000 | 000000 |
| 605 cfm @ 1/2 in of H₂O | 74 dB @ 15 ft. | 3/4 | 6" | 6" | 16 3/8" | 12 1/4" | 15 7/8" | Aluminum | Steel | No | 3/8" | 7/16" | 4 | 00000000 | 00000000 |
| 755 cfm @ 1/2 in. of H₂O | 72 dB @ 15 ft. | 3/4 | 6" | 6" | 20 1/4" | 17" | 15 3/4" | Black Powder-Coated Steel | Steel | No | 3/8" | 7/16" | 4 | 00000000 | 000000 |
230V AC,Single Phase—Hardwire | |||||||||||||||
| 1,135 cfm @ 1/2 in. of H₂O | 78 dB @ 15 ft. | 3 | 6" | 6" | 22 7/8" | 19 1/8" | 18 1/4" | Black Powder-Coated Steel | Steel | No | 3/8" | 7/16" | 4 | 00000000 | 00000000 |
120/230V AC,Single Phase—Hardwire | |||||||||||||||
| 855 cfm @ 1/2 in. of H₂O | 74 dB @ 15 ft. | 1 1/2 | 6" | 6" | 22 7/8" | 19 1/8" | 17 1/8" | Black Powder-Coated Steel | Steel | No | 3/8" | 7/16" | 4 | 00000000 | 00000000 |
| 955 cfm @ 1/2 in. of H₂O | 76 dB @ 15 ft. | 2 | 6" | 6" | 22 7/8" | 19 1/8" | 18" | Black Powder-Coated Steel | Steel | No | 3/8" | 7/16" | 4 | 00000000 | 00000000 |
| 1,045 cfm @ 1/2 in. of H₂O | 75 dB @ 15 ft. | 1 1/2 | 6" | 6" | 16 3/8" | 12 1/4" | 18" | Aluminum | Steel | No | 3/8" | 7/16" | 4 | 00000000 | 00000000 |
| 1,615 cfm @ 1/2 in. of H₂O | 72 dB @ 15 ft. | 2 | 8" | 8" | 21 1/2" | 14 7/8" | 18 5/8" | Aluminum | Steel | No | 3/8" | 7/16" | 4 | 00000000 | 00000000 |
230/460V AC,Three Phase—Hardwire | |||||||||||||||
| 350 cfm @ 1/2 in. of H₂O | 68 dB @ 15 ft. | 1/2 | 4" | 4" | 18 7/8" | 15 3/8" | 14 3/4" | Black Powder-Coated Steel | Steel | No | 3/8" | 7/16" | 4 | 00000000 | 000000 |
| 450 cfm @ 1/2 in. of H₂O | 64 dB @ 15 ft. | 1/4 | 6" | 6" | 16 3/8" | 12 1/4" | 15 1/4" | Aluminum | Steel | No | 3/8" | 7/16" | 4 | 00000000 | 000000 |
| 605 cfm @ 1/2 in of H₂O | 74 dB @ 15 ft. | 3/4 | 6" | 6" | 16 3/8" | 12 1/4" | 15 5/8" | Aluminum | Steel | No | 3/8" | 7/16" | 4 | 00000000 | 000000 |
| 755 cfm @ 1/2 in. of H₂O | 72 dB @ 15 ft. | 3/4 | 6" | 6" | 20 1/4" | 17" | 15 1/8" | Black Powder-Coated Steel | Steel | No | 3/8" | 7/16" | 4 | 00000000 | 000000 |
| 855 cfm @ 1/2 in. of H₂O | 74 dB @ 15 ft. | 1 1/2 | 6" | 6" | 22 7/8" | 19 1/8" | 17 1/8" | Black Powder-Coated Steel | Steel | No | 3/8" | 7/16" | 4 | 00000000 | 00000000 |
| 955 cfm @ 1/2 in. of H₂O | 76 dB @ 15 ft. | 2 | 6" | 6" | 22 7/8" | 19 1/8" | 17 1/8" | Black Powder-Coated Steel | Steel | No | 3/8" | 7/16" | 4 | 00000000 | 00000000 |
| 1,045 cfm @ 1/2 in. of H₂O | 75 dB @ 15 ft. | 1 1/2 | 6" | 6" | 16 3/8" | 12 1/4" | 17 1/4" | Aluminum | Steel | No | 3/8" | 7/16" | 4 | 00000000 | 00000000 |
| 1,135 cfm @ 1/2 in. of H₂O | 78 dB @ 15 ft. | 3 | 6" | 6" | 22 7/8" | 19 1/8" | 19 7/8" | Black Powder-Coated Steel | Steel | No | 3/8" | 7/16" | 4 | 00000000 | 00000000 |
| 1,615 cfm @ 1/2 in. of H₂O | 72 dB @ 15 ft. | 2 | 8" | 8" | 21 1/2" | 14 7/8" | 18 1/4" | Aluminum | Steel | No | 3/8" | 7/16" | 4 | 00000000 | 00000000 |
| Single-Duct Kit for Exhausters with 6" Inlet Dia. | 0000000 | Each | 0000000 |
| Dual-Duct Kit for Exhausters with 6" Inlet Dia. | 0000000 | Each | 000000 |
| Single-Duct Kit for Exhausters with 4" Inlet Dia. | 0000000 | Each | 000000 |
| Dual-Duct Kit for Exhausters with 8" Inlet Dia. | 0000000 | Each | 000000 |
| Single-Duct Kit for Exhausters with 8" Inlet Dia. | 0000000 | Each | 000000 |
Suspended-Hood Hazardous Location Fume Exhausters
Position these exhausters above drums, tanks, and distillers to remove fumes, vapors, and fine dust particles from your space. All have a motor that is UL listed for Class I, Divisions 1 and 2, Groups C and D; and Class II, Divisions 1 and 2, Groups F and G locations. Exhausters include a pulley system to adjust the hood height. Add an optional swivel wall bracket (sold separately) for side-to-side movement.
Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.
Exhausters | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Hose | Optional Swivel Wall Bracket | |||||||||||
| Hood Dia. | Airflow @ Static Pressure | Volume | Power, hp | ID | Lg., ft. | Mounting Location | Includes | Environmental Rating | Each | Each | ||
120/230V AC—Hardwire | ||||||||||||
| 27" | 400 cfm @ 0 in. of H₂O | 59 dB @ 15 ft. | 1/2 | 6" | 10 | Ceiling, Wall | Blower, Outside Vent Kit | NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups F, G IP54  | 00000000 | 000000000 | 00000000 | 0000000 |
| 32" | 400 cfm @ 0 in. of H₂O | 59 dB @ 15 ft. | 1/2 | 6" | 10 | Ceiling, Wall | Blower, Outside Vent Kit | NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups F, G IP54 | 00000000 | 00000000 | 00000000 | 000000 |
| 37" | 400 cfm @ 0 in. of H₂O | 59 dB @ 15 ft. | 1/2 | 6" | 10 | Ceiling, Wall | Blower, Outside Vent Kit | NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups F, G IP54 | 00000000 | 00000000 | 00000000 | 000000 |
| 44" | 400 cfm @ 0 in. of H₂O | 59 dB @ 15 ft. | 1/2 | 6" | 10 | Ceiling, Wall | Blower, Outside Vent Kit | NEC Class I Divisions 1, 2 Groups C, D NEC Class II Divisions 1, 2 Groups F, G IP54 | 00000000 | 00000000 | 00000000 | 000000 |
Bench Top Spray Booths
Use this portable spray booth for small projects. Contain overspray and discharge fumes as you paint. Not for use with hazardous, flammable, or explosive materials.
Full Size Spray Booths
Keep a dedicated area for finishing so you can maintain a safe, clean environment. Booths contain overspray and discharge fumes as you paint. They ship unassembled. Not for use with hazardous, flammable, or explosive materials. Motor is UL listed.
Booths that cannot be sold to Canada are restricted by local mercury content limits.
Overall | Work Area | Filter | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. (A) | Wd. (B) | Dp. (C) | Ht. (D) | Wd. (E) | Dp. (F) | No. of Filters | Wd. | Lg. | Exhaust Duct Dia. | Horsepower, hp | Current, A | Air Consumption, cfm | Specifications Met | Features | Includes | Cannot Be Sold To | Each | |
Galvanized Steel | ||||||||||||||||||
208-240/460VAC, Three Phase—Hardwire | ||||||||||||||||||
| 86" | 40" | 50" | 48" | 36" | 24" | 2 | 20" | 20" | 12" | 3/4 | 1.5 | 1,200 | OSHA Compliant 29 CFR 1910.107, NFPA 33, UL Listed | Filter-Change Indicator, Two Filter Frames | __ | __ | 0000000 | 000000000 |
| 86" | 64" | 62" | 48" | 60" | 36" | 6 | 20" | 20" | 18" | 1/2 | 2.4 | 2,000 | OSHA Compliant 29 CFR 1910.107, NFPA 33, UL Listed | Filter-Change Indicator, Two Filter Frames | Four 48" Fluorescent Bulbs (32 watt) | Canada | 0000000 | 00000000 |
| Replacement Polyester Plastic Filters (Pkg. of 25) | 00000000 | Pkg. | 000000 |
High-Efficiency Filters for Spray Booths
The most efficient spray booth filters we offer, these filters are made of polyester for moisture resistance.
| Lg. | Wd. | Thick. | Specifications Met | Pkg. Qty. | Pkg. | |
Polyester Plastic | ||||||
|---|---|---|---|---|---|---|
| 20" | 20" | 5/8" | UL 900 | 25 | 00000000 | 000000 |
Fume Hoods
Pair these hoods with an exhaust system to contain harmful fumes, vapors, and gasses while venting them away from work spaces—they protect users from inhaling or coming in contact with them. To access the enclosed space, these hoods have an adjustable sliding window or cutout, which also lets your exhaust system pull air from the outside. Polycarbonate windows are more durable than acrylic windows. All of these hoods resist chemicals and corrosion.
Polyethylene hoods have a molded one-piece construction with rounded inside corners to prevent gaps and crevices, making them easy to wipe clean. Those with a fixed observation window are good for demonstrations and when working in groups because they let others view contents and processes from the other side. The observation window is made of polycarbonate to withstand dents and scratches.
Polypropylene hoods are nonconductive. They’re also translucent, so they let in more light than the polyethylene hoods for added visibility.
Polycarbonate hoods are dent and scratch resistant. They’re also clear, offering an unobstructed view from all sides.
Overall | Opening | Windows | Outlets | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Recommended Airflow, cfm | Height | Width | Depth | Height | Width | Number of | Material | Clarity | Number of | OD | Gender | Includes | Each | |
Polyethylene Plastic with Adjustable Sliding Window | ||||||||||||||
| 200 | 22" | 27" | 13" | 12" | 22" | 1 | Acrylic Plastic | Clear | 1 | 4", 6" | Male | __ | 00000000 | 0000000 |
| 350 | 30" | 42" | 20" | 14 1/8" | 34 1/2" | 1 | Acrylic Plastic | Clear | 1 | 6" | Male | __ | 00000000 | 00000000 |
Polyethylene Plastic with Adjustable Sliding Window and Fixed Observation Window | ||||||||||||||
| 200 | 22" | 27" | 13" | 12" | 22" | 2 | Polycarbonate Plastic | Clear | 1 | 4", 6" | Male | __ | 00000000 | 000000 |
Polypropylene Plastic with Adjustable Sliding Window | ||||||||||||||
| 500 | 36" | 48" | 24" | 21" | 46" | 1 | Acrylic Plastic | Clear | 1 | 6" | Male | __ | 00000000 | 00000000 |
Polycarbonate Plastic with Adjustable Sliding Window | ||||||||||||||
| 200 | 26 1/8" | 25 7/8" | 24" | 13" | 20 1/8" | 1 | Polycarbonate Plastic | Clear | 1 | 6" | Male | __ | 00000000 | 00000000 |
| 200 | 26 1/8" | 43 7/8" | 24" | 13" | 38 1/8" | 1 | Polycarbonate Plastic | Clear | 2 | 6" | Male | __ | 00000000 | 00000000 |
Polycarbonate Plastic with Cutout | ||||||||||||||
| 150 | 22" | 22" | 22" | 6 1/4" | 14 1/2" | __ | __ | __ | 1 | 4", 6" | Male | One 15" Diameter Perforated Polypropylene Shelf, One 9" Diameter Perforated Polypropylene Shelf | 00000000 | 000000 |
Bench-Top Air Cleaner Hoods
Filtering away dust and particles, these hoods create a clean space for demanding work, such as bioprocessing, pharmaceuticals, electronics, and optics. They have a HEPA H14 filter to catch 99.995% of particles down to 0.1 microns, as well as a pre-filter to pull out large particles before they reach the HEPA filter. To draw air from outside the hood into the filters, they have a fan; there’s no need to connect them to ductwork. A flow monitor tracks the airflow and alerts you with a visible and audible alarm if the fan fails. They meet Class 100 (Fed. Std.) and Class 5 (ISO) clean room requirements.
As an alternative to filtering the air of an entire room, these hoods leave a large enough opening for comfortable access inside and have internal fluorescent lighting to help you see your work. Their work surface is 304L stainless steel, which resists bacteria and chemicals, and also is easy to clean. Mount them on workbenches and carts that are designed to hold them, or place them on your own bench top.
These hoods cannot be sold to California.
For technical drawings and 3-D models, click on a part number.
Overall | Work Surface | Housing | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Airflow, cfm | Volume | Voltage | Current | Ht. | Wd. | Dp. | Wd. | Dp. | Material | Color | Panel Cutout Dia. | Environmental Rating | Cannot Be Sold To | Each | |
304L Stainless Steel Work Surface with Acrylic Enclosure | |||||||||||||||
Hoods | |||||||||||||||
| 185 | 59 dB @ 5 ft. | 120V AC | 3A | 47 3/4" | 31 3/4" | 24 1/4" | 26 1/2" | 20 1/2" | Plastic | Black, Blue, White | 2 7/8" | Fed. Std. Class 100, ISO Class 5 | CA | 0000000 | 000000000 |
