Also known as twin-wheel casters, these lightweight and economical casters are often used on furniture and displays.

These casters have some of the lowest mount heights in their capacity range.

A shield on the swivel keeps out contaminants for extended service life.

Our most popular casters for carts and dollies.

Sealed swivel bearings lengthen the life of these casters.

These are good general purpose casters for moderately heavy loads.

Also known as twin-wheel casters, these lightweight and economical casters are often used on furniture and displays.

Zinc plating gives these casters a bright, clean finish.

A floor-friendly alternative to casters with metal wheels, these have heat-resistant treads that withstand temperatures up to 470° F.

Offered in a variety of mounting plate sizes, these casters match many common carts and dollies.

A tough, puncture-resistant tread surrounds a nonpressurized pocket of air so these wheels absorb shock to cushion like pneumatic wheels but won't go flat.

These are our best general purpose casters for light duty loads.

Low mount heights and small mounting plates make these a good choice where space is limited.

Thicker frames, larger mounting plates, and a heavy duty swivel design make these casters more durable than other casters in their capacity range.

Popular in hospitals and laboratories, our quietest casters have a soft, cushioning rubber tread with a hard polypropylene core for strength.

The legs on these casters are less angled than other casters to withstand the impact from containers that are frequently picked up and set back down.

A shield on the swivel keeps out contaminants for extended service life.

These air-filled wheels absorb shock to eliminate noise and cushion your load.

The steel frame has a black powder-coated finish to blend in with your equipment.

The soft rubber wheel and the sturdy steel frame withstand shock to protect your load.

Both the wheel bearings and the swivel bearings are protected to lengthen the life of these casters.

These are good general purpose casters for moderately heavy loads.

Offered in a variety of mounting plate sizes, these casters match many common carts and dollies.

The legs are less angled than other casters to withstand the impact from containers that are frequently picked up and set back down.

Stable and easy to turn, these casters have the lowest mount heights in their capacity range.

Mount these casters to the corners of carts, equipment, and angle iron.

Often used on creeper stools, these have a smooth-rolling angled wheel that creates a low profile.

Stable and easy to turn, these casters have some of the lowest mount heights in their capacity range.

A flange on one side of the wheel keeps your equipment running on square structural tubing and other rails.

With a 304 stainless steel frame for good corrosion resistance, these casters are an economical alternative to washdown casters. Wheels range from soft rubber that absorbs shock and sound while providing good traction on rough surfaces, to hard, impact-resistant rubber that rolls easily on smooth surfaces.

Polyurethane wheels combine the abrasion resistance of plastic with the shock- and sound-absorbing qualities of rubber. They can be used on smooth or rough floors and in areas with debris. Their 304 stainless steel frame is corrosion resistant.

Our most corrosion-resistant casters have a 316 stainless steel frame and stainless steel wheel bearings that stand up to frequent washdowns. Their soft rubber wheels absorb shock and provide good traction on rough surfaces.

These casters have some of the lowest mount heights in their capacity range.

Swivel casters have a kingpinless raceway with ball bearings for good impact resistance, smooth swiveling, and extended service life.

Strong, thick frames make these casters suitable for medium and heavy duty applications.

Move your heaviest loads with the largest casters we offer. Their forged steel construction holds up in demanding applications.

A flange on one or both sides of the wheel keeps your equipment running on square structural tubing and other rails.

With the smallest mounting plates and the lowest mounting heights of extra-high-capacity casters, these are a strong choice for tight spaces.

With the smallest mounting plates and the lowest mounting heights of extra-high-capacity casters, these are a strong choice for tight spaces.

Not only do these casters offer some of the highest capacities, they also withstand the stress of sudden impact.

Forged steel construction holds up in demanding applications.

Move your heaviest loads with the largest casters we offer. Their forged steel construction holds up in demanding applications.

A rounded tread and a lightweight wheel core make these casters easy to turn.

Pair these swivel casters that have a kingpinless raceway with ball bearings for good impact resistance, smooth swiveling, and extended service life, with the rigid casters to fit your needs.

Forged steel construction gives these casters the strength for demanding applications.

The wheels on these casters are made of a special rubber that is impact and chemical resistant and absorbs shock for smooth rolling over rough surfaces. They have a stainless steel frame and sealed bearings for corrosion resistance.

Choose these casters when you need high capacities and low mounting heights.

More durable than other high-capacity casters, these withstand the stress of sudden impact.

The springs in these casters take on bumpy surfaces and obstructions while preventing shock to the load.

Strong, thick frames make these casters suitable for medium and heavy duty applications.

These economical casters are designed for moderately heavy loads.

Treads are treated to protect the wheels from degradation. They meet NSF/ANSI 2 for food equipment use.

More durable than other high-capacity casters, these withstand the stress of sudden impact.

These highly maneuverable casters let you turn easily.

These are good general purpose casters for heavy loads.

A floor-friendly alternative to casters with metal wheels, these have heat-resistant treads that withstand temperatures up to 350° F.

Double-ball bearings and kingpinless swivel raceways offer better weight distribution and smooth swiveling.

More durable than other high-capacity casters, these withstand the stress of sudden impact.

Forged steel construction gives these casters the strength for demanding applications.

A thick frame and metal debris guards on the wheel bearings ensure smooth operation and extended service life.

These wheels cushion just as well as pneumatic wheels but are filled with polyurethane foam so they won't go flat.

A forged-steel frame and air-filled tire absorbs shock to prevent damage to your load.

These are good general purpose casters designed for heavy loads.

Strong, thick frames make these casters suitable for medium and heavy duty applications.

Withstanding temperatures up to 1600° F, these are the most heat-resistant casters we offer.

The legs are less angled than other casters to withstand the impact from containers that are frequently picked up and set back down.

A thick frame and metal debris guards on the wheel bearings ensure smooth operation and extended service life.

Forged steel construction gives these casters the strength for demanding applications.

Precision steel ball bearings result in smoother rolling than other high-capacity corrosion-resistant casters. They have a stainless steel frame for good corrosion resistance. Their polyurethane wheels combine the abrasion resistance of plastic with the shock- and sound-absorbing qualities of rubber.

A stainless steel frame and rust-resistant bearings make these casters good options for food-service equipment that's frequently washed down. The phenolic wheels are nonmarking and roll best on smooth surfaces.

Also known as twin‐wheel casters, these lightweight and economical casters are often used on furniture and displays.

These casters are offered with low mount heights to keep equipment like business machines and display fixtures stable.

Customize the length of your stem by adding any 1/2" dia. Grade 8 bolt through the unthreaded hole in the frame.

These casters are offered with low mount heights to keep equipment such as business machines and display fixtures stable.

Insert any 1/2" dia. Grade 8 bolt through the unthreaded hole in the frame to create a custom-length stem.

Customize the length of your stem by adding any 1/2" dia. Grade 8 bolt through the unthreaded hole in the frame.