Use these metric mounts on heavy machines and equipment.

Protect surfaces from scratches and wear.

These mounts have a cushion on top to provide padding between your furniture and the mount.

Made of 303 stainless steel, these metric mounts resist corrosion from water and most chemicals.

Able to withstand temperatures up to 350° F, these have the highest maximum temperature of our plastic mounts.

A shield on the stud prevents dirt accumulation on the threads and provides a finished appearance.

Nickel-plated steel has some corrosion resistance.

Yellow zinc-plated steel is more corrosion resistant than nickel-plated steel.

Made of 303/304 stainless steel, these mounts resist corrosion from water and most chemicals.

Made entirely of 316 stainless steel, these metric mounts have superior corrosion resistance.

Broader, stronger threads enable faster adjustments and higher load capacities than standard V-shaped threads.

Punch-out holes in the base let you bolt down these metric mounts to keep your equipment stationary.

Well-suited to damp environments, these metric mounts have a stainless steel stud and nut for corrosion resistance.

Well-suited to damp environments, these mounts have a stainless steel stud and nut for corrosion resistance.

Made of 303 stainless steel, these metric mounts resist corrosion from water and most chemicals.

Black-oxide steel has a dull shine for areas where appearance is a concern.

Made entirely of 316 stainless steel, these mounts are our most resistant to corrosion from chemicals, solvents, and water.

Well-suited to damp environments, these mounts have a stainless steel nut for excellent corrosion resistance.

An integral cushion reduces noise and vibration.

Cover the bottom of furniture legs.

Great for use outdoors, these feet are EPDM rubber, which withstands exposure to direct sunlight.

Peel back the film to stick these feet to the bottom of furniture and equipment legs.

Excellent chemical resistance makes these PTFE plastic feet the best choice for harsh environments.

Press these feet into tubular legs of tables, chairs, and other furniture.

A swiveling base compensates for angled legs and uneven surfaces.

A two-piece design simplifies installation and requires less clearance than one-piece mounts.

All-stainless steel construction stands up to water and chemicals and won't rust or corrode.

Thread these mounts into machinery to level them on uneven floors in sanitary environments such as food-processing areas.

A two-piece design requires less clearance than one-piece mounts and simplifies installation—raise your machine just enough to slide the base underneath, then insert the stud from above.

Rated for high load capacity, use these metric inserts to connect threaded leveling mounts to heavy equipment.

Insert these adjustable mounts into tube ends to level your equipment in a single step.

These mounts withstand exposure to weather and resist oil, antifreeze, and other petroleum-based fluids.

A two-piece design makes these mounts easier to install than one-piece mounts.

Specifically designed for light vertical loads, these mounts buckle to protect lightweight equipment such as small fans and pumps from vibration.

Isolate vibration and noise from oscillating equipment like fans and tumblers that create horizontal (shear) force.

Spring action provides significant isolation of vibration and noise.

The polyurethane base on these mounts resists solvents, gasoline, and oil, while the metal plate sustains heavy loads.

Made of nitrile rubber, these mounts are oil resistant for use in compression load applications with punch presses, milling machines, grinders, and air compressors.

Select these bumpers for applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Twist these bumpers into a threaded hole.

These bumpers withstand temperatures up to 300° F, which is twice as high as our other load rated bumpers. Use them in applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, these bumpers absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Twist them into a threaded hole.

Select these bumpers for applications that require specific load capacities. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Install them with a screw.

These nonslip bumpers protect equipment while minimizing the movement of objects that come in contact, making them good for positioning and robotic-gripping applications. Install them with adhesives or screws.

A ridge on the stem provides a tighter grip than other push-in bumpers. Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.

Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.

Make bumpers the size and shape you need. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. Press them into place with the adhesive backing.

Keep bumpers of various shapes, materials, and mounting styles on hand to solve whatever problems arise.

Select these bumpers for applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Mount these bumpers on a threaded stud.

These bumpers withstand temperatures up to 300° F, which is at least twice as high as our other load rated bumpers. Use them in applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, these bumpers absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Mount them on a threaded stud.

For quick and easy installation, wrap these bumpers around tubing, rods, machinery legs, control shafts, and levers to protect them from impact, dents, and scratches. They're also good for providing protection during shipment and storage.

Install these casters into a threaded hole. Adjust the leveling pad to keep your equipment stationary and compensate for uneven floors.

Also known as universal casters, press-fit these casters into standard 1" OD wire shelving posts.

Polyurethane wheels combine the abrasion resistance of plastic with the shock-absorbing qualities of rubber. They can be used on smooth or rough floors and in areas with debris.

Also known as universal casters, press-fit these casters into standard 1" OD wire shelving posts.

Also known as universal casters, press-fit these casters into standard 1" OD wire shelving posts.

The most durable plastic wheel, the nylon wheels on these casters are impact and wear resistant. They work well on smooth surfaces. The wheels dissipate static to protect sensitive electronic equipment from electrostatic discharge.

Press-fit these casters into sockets on Rubbermaid carts with a 7/16" Tube OD.

Use these general purpose casters in a variety of applications.

Also known as twin‐wheel casters, these lightweight and economical casters are often used on furniture and displays.

Customize the length of your stem by adding any 1/2" dia. Grade 8 bolt through the unthreaded hole in the frame.

Also known as twin‐wheel casters, these lightweight and economical casters are often used on furniture and displays.

Use these general purpose casters in a variety of applications.

Use these general purpose casters in a variety of applications.