An integral cushion reduces noise and vibration.

Peel back the film to stick these feet to the bottom of furniture and equipment legs.

Press these feet into tubular legs of tables, chairs, and other furniture.

These feet have angled or rounded bottoms to work with tubular furniture legs that meet the floor at an angle.

Cover the bottom of furniture legs.

Use these metric mounts on heavy machines and equipment.

These mounts have a cushion on top to provide padding between your furniture and the mount.

Able to withstand temperatures up to 350° F, these have the highest maximum temperature of our plastic mounts.

Made of 303 stainless steel, these mounts resist corrosion from water and most chemicals.

Made entirely of plastic, these mounts are resistant to oil and won't scratch your mounting surface.

Install these mounts on machines without feet.

Nickel-plated steel has some corrosion resistance.

Yellow zinc-plated steel is more corrosion resistant than nickel-plated steel.

Broader, stronger threads enable faster adjustments and higher load capacities than standard V-shaped threads.

Made of 303 stainless steel, these metric mounts resist corrosion from water and most chemicals.

Made entirely of 316 stainless steel, these metric mounts have superior corrosion resistance.

Well-suited to damp environments, these metric mounts have a stainless steel stud and nut for corrosion resistance.

An economical choice for applications in corrosive environments that don't require high load capacities, these mounts have a plastic base.

Made of 303 stainless steel, these metric mounts resist corrosion from water and most chemicals.

Made entirely of 316 stainless steel, these mounts are our most resistant to corrosion from chemicals, solvents, and water.

A two-piece design simplifies installation and requires less clearance than one-piece mounts.

Higher deflection ratings translate to greater vibration and shock isolation.

Thread these mounts into machinery to level them on uneven floors in sanitary environments such as food-processing areas.

Put these dollies under each leg of a load for stable transport. The recessed center keeps legs from sliding off.

The open design makes these dollies not only lighter than solid-platform dollies, but also easier to carry.

The platforms on these dollies are oversized to handle pallets, machinery, large containers, and other heavy equipment.

The open design makes these dollies not only lighter than solid-platform dollies, but also easier to carry.

The solid platform on these dollies prevents small loads from falling through.

With an oversized platform and wheels designed for easy turning, these dollies can handle heavy pallet loads.

The open design makes these dollies not only lighter than solid-platform dollies, but also easier to carry.

These dollies provide the leverage you need to move file cabinets and crates. Slide one end under the edge of a load and step down on the other end to raise the load.

Position these dollies under a load, then depress the handle to lift it.

These sets have all of the pieces you need to move and turn heavy equipment.

These sets have all of the pieces you need to move heavy equipment. Their small-diameter rollers rotate like a conveyor belt around a center plate to distribute weight evenly and provide a smooth ride.

Maneuver machines and heavy loads into confined spaces. These dollies have rollers that swivel independently, allowing movement in any direction.

These dollies are designed to make turning easy.

A floor-friendly alternative to casters with metal wheels, these have heat-resistant treads that withstand temperatures up to 470° F.

Zinc plating gives these casters a bright, clean finish.

Mount these casters to the corners of carts, equipment, and angle iron.

Offered in a variety of mounting plate sizes, these casters match many common carts and dollies.

A tough, puncture-resistant tread surrounds a nonpressurized pocket of air so these wheels absorb shock to cushion like pneumatic wheels but won't go flat.

The solid rubber wheels on these casters cushion as well as pneumatic wheels but won't go flat.

Popular in hospitals and laboratories, our quietest casters have a soft, cushioning rubber tread with a hard polypropylene core for strength.

Minimize shock to your load on bumpy surfaces with these spring-loaded casters.

Chrome or zinc plating gives these casters a bright, clean finish.

These air-filled wheels absorb shock to eliminate noise and cushion your load.

A shield on the swivel keeps out contaminants for extended service life.

More durable than other casters in their capacity range, these withstand the stress of sudden impact.

A floor-friendly alternative to casters with metal wheels, these have heat-resistant treads that withstand temperatures up to 470° F.

The legs on these casters are less angled than other casters to withstand the impact from containers that are frequently picked up and set back down.

The steel frame has a black powder-coated finish to blend in with your equipment.

Made from a special blend of rubber, the wheels on these casters roll easily over smooth and rough surfaces.

Mount these casters to the corners of carts, equipment, and angle iron.

Our most popular casters for carts and dollies.

A shield on the swivel keeps out contaminants for extended service life.

Sealed swivel bearings lengthen the life of these casters.

The wheels of these casters have a 90° V-groove and a flat tread to move your equipment on angle-iron track as well as the floor.

The lightweight wheels on these casters are easy to get rolling.

These are good general purpose casters for moderately heavy loads.

The solid rubber wheels on these casters cushion as well as pneumatic wheels but won't go flat.

Withstanding temperatures up to 1600° F, these are the most heat-resistant casters we offer.

These are good general purpose casters for moderately heavy loads.

A flange on one side of the wheel keeps your equipment running on square structural tubing and other rails.

The steel frame has a black powder-coated finish to blend in with your equipment.

These are good general purpose casters for moderately heavy loads.

Offered in a variety of mounting plate sizes, these casters match many common carts and dollies.

The wheels of these casters have a 90° V-groove and a flat tread to move your equipment on angle-iron track as well as the floor. Polyurethane wheels combine the abrasion resistance of plastic with the shock- and sound-absorbing qualities of rubber. Their 304 stainless steel frame is corrosion resistant.

The most durable plastic wheel, the nylon wheels on these casters are impact and wear resistant. They work well on smooth surfaces. Their 304 stainless steel frame is corrosion resistant.

With a 304 stainless steel frame for good corrosion resistance, these casters are an economical alternative to washdown casters. Wheels range from soft rubber that absorbs shock and sound while providing good traction on rough surfaces, to hard, impact-resistant rubber that rolls easily on smooth surfaces.

These highly maneuverable casters let you turn easily.

With some of the highest capacities in their capacity range, these casters have a kingpinless swivel design for impact resistance and smooth swiveling.

These are good general purpose casters designed for heavy loads.

These economical casters are designed for moderately heavy loads.

Double-ball bearings and kingpinless swivel raceways offer better weight distribution and smooth swiveling.

Treads are treated to protect the wheels from degradation. They meet NSF/ANSI 2 for food equipment use.

Forged steel construction gives these casters the strength for demanding applications.

Double-ball bearings and kingpinless swivel raceways offer better weight distribution and smooth swiveling.

A floor-friendly alternative to casters with metal wheels, these have heat-resistant treads that withstand temperatures up to 350° F.

More durable than other high-capacity casters, these withstand the stress of sudden impact.