Peel back the film to stick these feet to the bottom of furniture and equipment legs.

Excellent chemical resistance makes these PTFE plastic feet the best choice for harsh environments.

Press these feet into tubular legs of tables, chairs, and other furniture.

These feet have angled or rounded bottoms to work with tubular furniture legs that meet the floor at an angle.

A swiveling base compensates for angled legs and uneven surfaces.

Use these feet on furniture with wood legs.

Black-oxide steel has a dull shine for areas where appearance is a concern.

Made of 303 stainless steel, these mounts resist corrosion from water and most chemicals.

An economical choice for applications in corrosive environments that don't require high load capacities, these mounts have a plastic base.

All-stainless steel construction stands up to water and chemicals and won't rust or corrode.

Thread these mounts into machinery to level them on uneven floors in sanitary environments such as food-processing areas.

Choose from mounts that support 3,000 to 30,000 lbs. for heavy machinery.

Higher deflection ratings translate to greater vibration and shock isolation than our other vibration-damping leveling mounts.

Higher deflection ratings translate to greater vibration and shock isolation.

Made entirely of plastic, these mounts are resistant to oil and won't scratch your mounting surface.

Use these mounts on heavy machines and equipment.

Protect surfaces from scratches and wear.

A hex nut at the base of the stud allows for easy height adjustment.

These mounts have a cushion on top to provide padding between your furniture and the mount.

A shield on the stud prevents dirt accumulation on the threads and provides a finished appearance.

Zinc-plated steel is more corrosion resistant than nickel-plated steel.

Punch-out holes in the base let you bolt down these mounts to keep your equipment stationary.

Well-suited to damp environments, these mounts have a stainless steel stud and nut for corrosion resistance.

Made of zinc-plated steel, these metric leveling mounts are more corrosion resistant than nickel-plated steel leveling mounts.

An offset mounting hole allows for installation without moving your machine.

Punch-out holes in the base let you bolt down these metric mounts to keep your equipment stationary.

Made of 303 stainless steel, these metric mounts resist corrosion from water and most chemicals.

Made entirely of 316 stainless steel, these metric mounts have superior corrosion resistance.

The polyurethane base on these mounts resists solvents, gasoline, and oil, while the metal plate sustains heavy loads.

Spring action provides significant isolation of vibration and noise.

Made of nitrile rubber, these mounts are oil resistant for use in compression load applications with punch presses, milling machines, grinders, and air compressors.

Connect these mounts to your air supply for vibration and shock isolation in compression load applications.

A two-piece design makes these mounts easier to install than one-piece mounts.

An interlocking steel frame in these mounts prevents collapse, even if the rubber fails.

Specifically designed for light vertical loads, these mounts buckle to protect lightweight equipment such as small fans and pumps from vibration.

Install these mounts with a socket head cap screw—the counterbored hole ensures the screw sits flush with or below the top of the mount.

Designed for tight spaces such as inside machinery, these mounts fit into a cutout, so they so they have a low top profile.

Isolate vibration and noise from oscillating equipment like fans and tumblers that create horizontal (shear) force.

Reinforced with fabric so extreme compression won’t deform them, these pads protect surfaces from impact, dampen vibration and noise, and act as stable connection points. They’re commonly known as bearing pads.

Place pads under equipment, such as drill presses, milling machines, saws, and air-conditioning units to minimize vibration and noise transmitted to and from machinery.

These soft pads work well for isolating vibration with light loads such as lab and testing equipment.

Made of fiber-reinforced PVC, these pads endure exposure to corrosive chemicals, such as cleaning solvents, chlorine, and hydrochloric acid.

Line toolboxes and drawers to cushion and protect small parts.

Press these bumpers into place with the adhesive backing. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. They're comparable to Bumpon bumpers.

Select these bumpers for applications that require specific load capacities. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. Press them into place with the adhesive backing. They're comparable to Bumpon bumpers.

Keep bumpers of various shapes, materials, and mounting styles on hand to solve whatever problems arise.

These bumpers withstand temperatures up to 300° F, which is twice as high as our other load rated bumpers. Use them in applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, these bumpers absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Twist them into a threaded hole.

All of these bumpers are reinforced with a steel core for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. Twist them into a threaded hole.

Select these bumpers for applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Twist these bumpers into a threaded hole.

All of these bumpers are reinforced with an embedded washer or base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. Install them with screws.

These bumpers are at a 90° angle to protect corners on equipment, walls, and docks from damage caused by carts, vehicles, and other moving objects. Install them with screws.

Select these bumpers for applications that require specific load capacities. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Install them with a screw.

With a textured surface, these nonslip bumpers protect equipment while minimizing the movement of objects that come in contact, making them good for positioning applications. Install them with adhesives or screws.

Also known as furniture pads, these blankets provide soft, reusable padding for furniture and large equipment during moving and storage.

Made from a blended material for a longer life, these are the strongest and most durable shipping blankets we offer.

Send us a drawing, and we'll cut your custom shim. Shims are made of layers of metal bonded with adhesive; remove layers with a utility knife until you get the thickness you need.

Install these adhesive-back sheets to reduce noise from vibrating surfaces, such as duct and equipment housings.