Mount the funnel on the telescoping tube to help direct up to 8 gallons of liquid into the jug without splattering.

These bottles are fluorinated to resist absorption of contents.

Store a large quantity of liquid in these bottles and use the built-in faucet to dispense.

Style A have thick walls for durability.

Attach tubing to easily transfer liquid out of these bottles.

Bottles with bottom outlet use gravity to transfer liquid. Attach 3/8” ID tubing (not included) to the barbed outlet.

Bottles with top outlet and tubing require a pump to draw liquid through the included tubing. They are commonly used in chromatography applications. The bottle has a shatter-resistant safety coating that also protects light-sensitive contents.

Fill these air-and liquid-tight bottles directly from your line to store, test, and ship liquids. Connect to a quick-clamp fitting (also known as tri-clamp) with the included seal and clamp to fill, then secure the contents with the lid. Bottles are 316L stainless steel, which is easy to clean and does not react to the acids and alkalies in food, or chemicals such as sulfuric acid. The extra-smooth interior is polished to prevent product buildup and inhibit bacteria growth. These bottles are engraved with lot numbers for traceability and include a material test report.

Style A and B beakers meet NSF/ANSI 2 sanitary standards for food equipment.

Beakers that cannot be sold to the regions listed are restricted by local regulatory limits on BPA (Bispenol A) in products that come into contact with food.

Beakers that meet NSF/ANSI 2 comply with a sanitary standard for food equipment.

Store leftover hazardous liquids until they can be properly discarded. The spring-loaded, self-closing cap on these cans automatically vents to relieve excess vapor pressure, and a flame arrester protects against outside ignition.

Plastic cans are for aggressive chemicals and corrosives.

316 stainless steel cans are for liquids such as acetone, alcohol, ether, toluene, and xylene.

Galvanized steel cans are for petroleum-based liquids.

Also known as Type I safety cans, these have a single opening for both filling and pouring. Safety cans are a safer choice than fuel cans for storing flammable liquids. They have a spring-loaded, self-closing lid; pressure-relief cap; and a flame arrester.

Powder-coated steel cans are for petroleum-based liquids. Color-coding typically indicates usage: red for gasoline, yellow for diesel, blue for kerosene, and green for other liquids.

Stainless steel cans are corrosion resistant and often used with liquids such as acetone, ether, toluene, and xylene. Style E has a steel rim at the base for added support.

Polyethylene plastic cans won't rust, dent, or pit and are for chemicals and corrosives.

Also known as Type II safety cans, these have two openings—one for filling, one for pouring. Safety cans are a safer choice than fuel cans for storing flammable liquids. They have a spring-loaded, self-closing lid; pressure-relief cap; flame arrester; and a vacuum-release valve for controlled pouring.

Color-coding typically indicates usage: red for gasoline, yellow for diesel, blue for kerosene, and green for other liquids.

Style B have a steel roll bar that protects the spout, handle, and trigger during transport.

A self-closing faucet provides controlled, one-handed dispensing of flammable liquids. These safety cans also have a flame arrester and a self-closing pressure-relief cap.

Powder-coated steel cans are for petroleum-based liquids.

Polyethylene plastic cans are for chemicals and corrosives.

Stainless steel cans are corrosion resistant and often used with liquids such as acetone, ether, toluene, and xylene.

Tip cans down for controlled dispensing, then swing them back to their upright position. These cans have a pressure-relief cap with built-in vacuum-release valve for controlled pouring.

Powder-coated steel can is for petroleum-based liquids.

Polyethylene plastic can is for chemicals and corrosives.

Carry and store petroleum-based liquids in these sturdy cans. Color-coding indicates usage: red for gasoline, yellow for diesel, and blue for kerosene.

The spout on Styles A and C automatically closes to prevent spills. Push the button to pour.

Flip the spout on Style B down for pouring and up for storage. Press the trigger to open a vent that allows smooth pouring without spills. Style B fuel cans cannot be sold to California due to local regulatory limits on VOC (volatile organic compounds), or outside the United States and Canada due to product labeling requirements.

Prevent the absorption of harsh solvents, cleaning agents, and adhesives to safely ship hazardous liquids. There is a security ring on the lid that separates when the jug is opened. Also known as closed-head pails.

Also known as closed-head pails, these have a small top opening. They safely ship hazardous liquids.

The jug in this kit holds its shape as liquid is dispensed. It comes with a cardboard box for protection. Use them together to safely ship hazardous materials. The jug has threads for attaching a spigot.

Note: It is the responsibility of the shipper to properly package and label all hazardous materials, and ensure appropriate method of shipment in compliance with all applicable regulatory guidelines.

The jug inside these containers collapses as it dispenses for uninterrupted flow. The jug is protected by a cardboard box with an opening to access the jug’s spout. Use them together to safely ship hazardous liquids.

Note: It is the responsibility of the shipper to properly package and label all hazardous materials, and ensure appropriate method of shipment in compliance with all applicable regulatory guidelines.

Control the flow of contents better than with wide-mouth bottles. Use these puncture-resistant bottles as inner packaging components to safely ship hazardous liquids.

Access tight spaces with the 36" long tube that extends from this spray bottle. A filter at the base of the tube prevents clogs.

For technical drawings and 3-D models, click on a part number.