McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    128 Products

    Wedge Anchors for Concrete

    Image of ProductInUse. Front orientation. Anchors. Wedge Anchors for Concrete.
    Image of Product. Front orientation. Contains Annotated. Anchors. Wedge Anchors for Concrete.
    Secure junction boxes, safety railings, and structural beams in concrete floors. These anchors have a wedge-shaped base that expands against the hole’s sides, forming a tight grip that withstands high pull-out forces. Since the grip is focused at the base, these anchors are best suited for concrete, which can handle the gripping pressure better than softer block and brick. However, they require holes that match the anchors' diameter exactly to achieve their pull-out strength, making them more difficult to install than sleeve anchors.
    To install, drive the anchor through your component into a drilled hole until the washer and nut meet the surface. Then, tighten the nut to expand the anchor base. Remove your component by unfastening the nut, but the anchor itself cannot be removed.
    Corrosion-Resistant Galvanized Steel—Combine the strength of steel with the rust resistance of stainless steel. These anchors are an economical alternative to 18-8 stainless steel in wet and outdoor environments, but they’ll corrode or pit when exposed to salt water and chemicals.
    Ultimate
    Strength, lbf
    Each
    Package
    Lg.
    Thread
    Size
    Min. Thread
    Lg.
    Min. Installation
    Dp.
    Drill Bit
    Size
    Pull-Out
    Shear
    Conditions
    Tested In
    Installation
    Torque, ft·lbf
    Each
    Pkg.
    Qty.
    Pkg.
    Corrosion-Resistant Galvanized Steel
     
    1/4" Diameter
    1 3/4"1/4"-20
    		5/8"1 1/4"1/4"
    		1,6802,5204,000 psi Concrete897110A1000000010097110A611000000
    2 1/4"1/4"-20
    		1 1/8"1 1/4"1/4"
    		1,6802,5204,000 psi Concrete897110A101000010097110A61200000
    3 1/4"1/4"-20
    		2 1/8"1 1/4"1/4"
    		1,6802,5204,000 psi Concrete897110A102000010097110A61300000
     
    3/8" Diameter
    2 1/4"3/8"-16
    		7/8"1 3/4"3/8"
    		3,8803,9204,000 psi Concrete2597110A20000005097110A61400000
    2 3/4"3/8"-16
    		1 3/8"1 3/4"3/8"
    		3,8803,9204,000 psi Concrete2597110A20100005097110A61500000
    3"3/8"-16
    		1 5/8"1 3/4"3/8"
    		3,8803,9204,000 psi Concrete2597110A20400005097110A61700000
    3 3/4"3/8"-16
    		2 3/8"1 3/4"3/8"
    		3,8803,9204,000 psi Concrete2597110A22200005097110A61800000
    5"3/8"-16
    		3 1/8"1 3/4"3/8"
    		3,8803,9204,000 psi Concrete2597110A20300005097110A61600000
    7"3/8"-16
    		4 1/2"1 3/4"3/8"
    		3,8803,9204,000 psi Concrete2597110A23100001097110A61900000
     
    1/2" Diameter
    2 3/4"1/2"-13
    		1"2 1/4"1/2"
    		6,3206,9204,000 psi Concrete5597110A30000002597110A62100000
    3 3/4"1/2"-13
    		2"2 1/4"1/2"
    		6,3206,9204,000 psi Concrete5597110A30100002597110A62200000
    4 1/4"1/2"-13
    		3"2 1/4"1/2"
    		5,0686,8284,000 psi Concrete5097110A11200002597110A11300000
    5 1/2"1/2"-13
    		3 5/8"2 1/4"1/2"
    		6,3206,9204,000 psi Concrete5597110A30200002597110A62300000
    7"1/2"-13
    		4 3/8"2 1/4"1/2"
    		6,3206,9204,000 psi Concrete5597110A30300002597110A62400000
    8 1/2"1/2"-13
    		2"2 1/4"1/2"
    		6,3206,9204,000 psi Concrete5597110A30400001097110A62500000
     
    5/8" Diameter
    3 1/2"5/8"-11
    		1 3/8"2 3/4"5/8"
    		9,76011,9604,000 psi Concrete9597110A40000001097110A62600000
    4 1/2"5/8"-11
    		2"2 3/4"5/8"
    		9,76011,9604,000 psi Concrete9597110A40100001097110A62700000
    5"5/8"-11
    		3"2 3/4"5/8"
    		9,76011,9604,000 psi Concrete9597110A45400001097110A63100000
    6"5/8"-11
    		3 7/8"2 3/4"5/8"
    		9,76011,9604,000 psi Concrete9597110A45200001097110A62900000
    7"5/8"-11
    		3 1/2"2 3/4"5/8"
    		9,76011,9604,000 psi Concrete9597110A45500001097110A63200000
    8 1/2"5/8"-11
    		4 7/8"2 3/4"5/8"
    		9,76011,9604,000 psi Concrete9597110A45600001097110A63300000
    10"5/8"-11
    		2"2 3/4"5/8"
    		9,76011,9604,000 psi Concrete9597110A411000001097110A62800000
     
    3/4" Diameter
    4 1/4"3/4"-10
    		1 3/4"3 3/4"3/4"
    		13,16015,8804,000 psi Concrete17597110A50000001097110A63500000
    4 3/4"3/4"-10
    		2 1/4"3 3/4"3/4"
    		13,16015,8804,000 psi Concrete17597110A55400001097110A64200000
    5 1/2"3/4"-10
    		3"3 3/4"3/4"
    		13,16015,8804,000 psi Concrete17597110A50100001097110A63600000
    6 1/4"3/4"-10
    		3 5/8"3 3/4"3/4"
    		13,16015,8804,000 psi Concrete17597110A55500001097110A64300000
    7"3/4"-10
    		4 3/8"3 3/4"3/4"
    		13,16015,8804,000 psi Concrete17597110A502000001097110A63700000
    8 1/2"3/4"-10
    		2 1/4"3 3/4"3/4"
    		13,16015,8804,000 psi Concrete17597110A50300000497110A63800000
    10"3/4"-10
    		2 1/4"3 3/4"3/4"
    		13,16015,8804,000 psi Concrete17597110A50400000497110A63900000
    12"3/4"-10
    		2 1/4"3 3/4"3/4"
    		13,16015,8804,000 psi Concrete17597110A50600000497110A64100000
     
    7/8" Diameter
    6"7/8"-9
    		2 1/8"4"7/8"
    		16,60032,5204,000 psi Concrete25097110A60000000497110A64400000
    8"7/8"-9
    		2 1/8"4"7/8"
    		16,60032,5204,000 psi Concrete25097110A60100000497110A64500000
    10"7/8"-9
    		2 1/8"4"7/8"
    		16,60032,5204,000 psi Concrete25097110A60200000497110A64600000
     
    1" Diameter
    6"1"-8
    		2 1/4"4"1"
    		20,40032,4924,000 psi Concrete30097110A70000000497110A64700000
    9"1"-8
    		2 1/4"4"1"
    		20,40032,4924,000 psi Concrete30097110A70100000497110A64800000
    12"1"-8
    		2 1/4"4"1"
    		20,40032,4924,000 psi Concrete30097110A70200000497110A64900000
     
    1 1/4" Diameter
    9"1 1/4"-7
    		2 3/4"5 5/8"1 1/4"
    		28,76047,0004,000 psi Concrete40097110A80500000497110A651000000
    12"1 1/4"-7
    		2 3/4"5 5/8"1 1/4"
    		28,76047,0004,000 psi Concrete40097110A80800000497110A652000000
     

    Hook Anchors for Concrete

    Fasten everything from signposts to support beams. Install these anchors in wet concrete during construction, with their threads sticking out of the surface. Designed for permanent installations, you'd have to cut these anchors out to remove them.
    L-Hook
    Image of Product. Front orientation. Contains Annotated. Anchors. Hook Anchors for Concrete, L-Hook.
    Corrosion-Resistant Hot-Dipped Galvanized Steel—Combines the strength of steel with the rust resistance of stainless steel. These anchors are an economical alternative to 18-8 stainless steel in wet and outdoor environments, but they’ll corrode or pit when exposed to salt water and chemicals. They must be used with other hot-dipped galvanized fasteners.
    Ultimate
    Strength
    Lg.
    Thread
    Size
    Min. Thread
    Lg.
    Hook
    Lg.
    Tensile Strength,
    psi
    Pull-Out
    Shear
    Specs.
    Met
    Each
    Corrosion-Resistant Hot-Dipped Galvanized Steel
     
    3/8" Diameter
    8"3/8"-16
    		2 1/2"2"58,000Not RatedNot RatedASTM A3691603A10000000
    10"3/8"-16
    		2 1/2"2"58,000Not RatedNot RatedASTM A3691603A1100000
    12"3/8"-16
    		2 1/2"2"58,000Not RatedNot RatedASTM A3691603A1200000
    14"3/8"-16
    		2 1/2"2"58,000Not RatedNot RatedASTM A3691603A1300000
    24"3/8"-16
    		2 1/2"2"58,000Not RatedNot RatedASTM A3691603A5100000
     
    1/2" Diameter
    8"1/2"-13
    		2 1/2"2"58,000Not RatedNot RatedASTM A3691603A1500000
    10"1/2"-13
    		2 1/2"2"58,000Not RatedNot RatedASTM A3691603A1550000
    12"1/2"-13
    		2 1/2"2"58,000Not RatedNot RatedASTM A3691603A1600000
    14"1/2"-13
    		2 1/2"2"58,000Not RatedNot RatedASTM A3691603A5200000
    16"1/2"-13
    		2 1/2"2"58,000Not RatedNot RatedASTM A3691603A1650000
    18"1/2"-13
    		2 1/2"2"58,000Not RatedNot RatedASTM A3691603A1700000
     
    5/8" Diameter
    8"5/8"-11
    		2 1/2"2"58,000Not RatedNot RatedASTM A3691603A2500000
    10"5/8"-11
    		2 1/2"2"58,000Not RatedNot RatedASTM A3691603A2550000
    12"5/8"-11
    		2 1/2"2"58,000Not RatedNot RatedASTM A3691603A2600000
    14"5/8"-11
    		2 1/2"2"58,000Not RatedNot RatedASTM A3691603A54000000
    16"5/8"-11
    		2 1/2"2"58,000Not RatedNot RatedASTM A3691603A55000000
    18"5/8"-11
    		2 1/2"2"58,000Not RatedNot RatedASTM A3691603A26500000
    24"5/8"-11
    		2 1/2"2"58,000Not RatedNot RatedASTM A3691603A56000000
     
    3/4" Diameter
    8"3/4"-10
    		3"2 3/4"58,000Not RatedNot RatedASTM A3691603A3000000
    10"3/4"-10
    		3"2 3/4"58,000Not RatedNot RatedASTM A3691603A3050000
    12"3/4"-10
    		3"2 3/4"58,000Not RatedNot RatedASTM A3691603A31000000
    14"3/4"-10
    		3"2 3/4"58,000Not RatedNot RatedASTM A3691603A31500000
    16"3/4"-10
    		3"2 3/4"58,000Not RatedNot RatedASTM A3691603A53000000
    18"3/4"-10
    		3"2 3/4"58,000Not RatedNot RatedASTM A3691603A32000000
    24"3/4"-10
    		3"2 3/4"58,000Not RatedNot RatedASTM A3691603A32500000
     
    1" Diameter
    12"1"-8
    		4"3 3/4"58,000Not RatedNot RatedASTM A3691603A41000000
    16"1"-8
    		4"3 3/4"58,000Not RatedNot RatedASTM A3691603A57000000
    18"1"-8
    		4"3 3/4"58,000Not RatedNot RatedASTM A3691603A43000000
    24"1"-8
    		4"3 3/4"58,000Not RatedNot RatedASTM A3691603A44000000
     
    J-Hook
    Image of Product. Front orientation. Contains Annotated. Anchors. Hook Anchors for Concrete, J-Hook.
    Corrosion-Resistant Hot-Dipped Galvanized Steel—Combines the strength of steel with the rust resistance of stainless steel. These anchors are an economical alternative to 18-8 stainless steel in wet and outdoor environments, but they’ll corrode or pit when exposed to salt water and chemicals. They must be used with other hot-dipped galvanized fasteners.
    Hook
    Ultimate
    Strength
    Lg.
    Thread
    Size
    Min. Thread
    Lg.
    Lg.
    Opening
    Tensile Strength,
    psi
    Pull-Out
    Shear
    Specs.
    Met
    Each
    Corrosion-Resistant Hot-Dipped Galvanized Steel
     
    3/8" Diameter
    8"3/8"-16
    		2.5"1"1/2"58,000Not RatedNot RatedASTM A3691604A11100000
    10"3/8"-16
    		2.5"1"1/2"58,000Not RatedNot RatedASTM A3691604A1210000
    12"3/8"-16
    		2.5"1"1/2"58,000Not RatedNot RatedASTM A3691604A1300000
    14"3/8"-16
    		2.5"1"1/2"58,000Not RatedNot RatedASTM A3691604A1400000
     
    1/2" Diameter
    8"1/2"-13
    		2.5"1 1/4"5/8"58,000Not RatedNot RatedASTM A3691604A2100000
    10"1/2"-13
    		2.5"1 1/4"5/8"58,000Not RatedNot RatedASTM A3691604A2200000
    12"1/2"-13
    		2.5"1 1/4"5/8"58,000Not RatedNot RatedASTM A3691604A2300000
    16"1/2"-13
    		2.5"1 1/4"5/8"58,000Not RatedNot RatedASTM A3691604A2450000
    18"1/2"-13
    		2.5"1 1/4"5/8"58,000Not RatedNot RatedASTM A3691604A25000000
     
    5/8" Diameter
    8"5/8"-11
    		2.5"1 1/4"3/4"58,000Not RatedNot RatedASTM A3691604A31000000
    10"5/8"-11
    		2.5"1 1/4"3/4"58,000Not RatedNot RatedASTM A3691604A32000000
    12"5/8"-11
    		2.5"1 1/4"3/4"58,000Not RatedNot RatedASTM A3691604A33000000
    18"5/8"-11
    		2.5"1 1/4"3/4"58,000Not RatedNot RatedASTM A3691604A34000000
     
    3/4" Diameter
    8"3/4"-10
    		3"1 1/2"1 1/8"58,000Not RatedNot RatedASTM A3691604A4110000
    10"3/4"-10
    		3"1 1/2"1 1/8"58,000Not RatedNot RatedASTM A3691604A42000000
    12"3/4"-10
    		3"1 1/2"1 1/8"58,000Not RatedNot RatedASTM A3691604A43000000
    14"3/4"-10
    		3"1 1/2"1 1/8"58,000Not RatedNot RatedASTM A3691604A43500000
    18"3/4"-10
    		3"1 1/2"1 1/8"58,000Not RatedNot RatedASTM A3691604A45000000
    24"3/4"-10
    		3"1 1/2"1 1/8"58,000Not RatedNot RatedASTM A3691604A49500000
     
    1" Diameter
    10"1"-8
    		4"3 1/4"2 1/8"58,000Not RatedNot RatedASTM A3691604A51100000
    12"1"-8
    		4"3 1/4"2 1/8"58,000Not RatedNot RatedASTM A3691604A51300000
    18"1"-8
    		4"3 1/4"2 1/8"58,000Not RatedNot RatedASTM A3691604A51900000
    24"1"-8
    		4"3 1/4"2 1/8"58,000Not RatedNot RatedASTM A3691604A52200000
     
    back to top