McMaster-Carr

Choose a Category

	ID ID

1/8"

	OD OD

	Wall Thickness Wall Thickness

	Grade Grade

G-10

G-10/FR4

	Performance Properties Performance Properties

	Resin Material Resin Material

Plastic

Epoxy

	Reinforcement Material Reinforcement Material

Fabric

Paper

	Electrical Insulation Rating Electrical Insulation Rating

Good

Poor

	Tensile Strength Rating Tensile Strength Rating

Excellent

Good

	Impact Strength Rating Impact Strength Rating

Excellent

Poor

	Compressive Strength Compressive Strength

	Flexural Strength Flexural Strength

	Impact Strength Impact Strength

0.35-0.55 ft.-lbs./in.

0.8-1.25 ft.-lbs./in.

1.4-1.7 ft.-lbs./in.

5.5-9.5 ft.-lbs./in.

5.5-12 ft.-lbs./in.

	Water Absorption Rating Water Absorption Rating

Good

Poor

	Color Color

	Brown
	Yellow

	Length Length

	Specifications Met Specifications Met

Mil. Spec.

	Hardness Rating Hardness Rating

Extra Hard

Not Rated

	Hardness Hardness

Rockwell M100

Rockwell M110

Not Rated

	Density Density

0.069 lbs./cu. in.

0.043-0.05 lbs./cu. in.

0.045-0.05 lbs./cu. in.

0.047-0.052 lbs./cu. in.

	Tensile Strength Tensile Strength

	Dielectric Strength Dielectric Strength

	Maximum Temperature Maximum Temperature

235Â° F

265Â° F

View catalog pages (5)

Forward

How can we improve?

222 Products

About Composites

Color: Brown
Max. Temperature: 265Â° F
Tensile Strength: 8,000-23,900 psi (Excellent)
Impact Strength: 0.35-0.55 ft.-lbs./in. (Poor)
Hardness: Rockwell M100 (Extra Hard)
For Use Outdoors: No
Specifications Met: MIL-I-24768/11

Offering greater strength and better electrical-insulating properties than Garolite CE tubes, these Garolite XX tubes are often fabricated into low-cost electrical components. Garolite XX is constructed of a phenolic resin with paper reinforcement, which makes it easy to machine. It's also known as paper-grade industrial laminate, phenolic, and Bakelite.

1/32" Wall Thick. (-0.008" to 0.008")
OD	OD Tolerance	ID	ID Tolerance	Lg.		Each
1/4"	-0.005" to 0.005"	3/16"	-0.003" to 0.003"	40"	00000000	00000
5/16"	-0.005" to 0.005"	1/4"	-0.003" to 0.003"	40"	00000000	0000
3/8"	-0.005" to 0.005"	5/16"	-0.003" to 0.003"	40"	00000000	00000
7/16"	-0.005" to 0.005"	3/8"	-0.003" to 0.003"	40"	00000000	00000
9/16"	-0.005" to 0.005"	1/2"	-0.003" to 0.003"	40"	00000000	00000
11/16"	-0.005" to 0.005"	5/8"	-0.003" to 0.003"	40"	00000000	00000
13/16"	-0.005" to 0.005"	3/4"	-0.003" to 0.003"	40"	00000000	00000
1 1/16"	-0.008" to 0.008"	1"	-0.005" to 0.005"	40"	00000000	00000
1 5/16"	-0.008" to 0.008"	1 1/4"	-0.005" to 0.005"	40"	00000000	00000
1/16" Wall Thick. (-0.008" to 0.008")
5/16"	-0.005" to 0.005"	3/16"	-0.003" to 0.003"	40"	00000000	0000
3/8"	-0.005" to 0.005"	1/4"	-0.003" to 0.003"	40"	00000000	0000
7/16"	-0.005" to 0.005"	5/16"	-0.003" to 0.003"	40"	00000000	0000
1/2"	-0.005" to 0.005"	3/8"	-0.003" to 0.003"	40"	00000000	0000
5/8"	-0.005" to 0.005"	1/2"	-0.003" to 0.003"	40"	00000000	0000
3/4"	-0.005" to 0.005"	5/8"	-0.003" to 0.003"	40"	00000000	0000
7/8"	-0.005" to 0.005"	3/4"	-0.003" to 0.003"	40"	00000000	00000
1 1/8"	-0.008" to 0.008"	1"	-0.005" to 0.005"	40"	00000000	00000
1 3/8"	-0.008" to 0.008"	1 1/4"	-0.005" to 0.005"	40"	00000000	00000
1 1/2"	-0.008" to 0.008"	1 3/8"	-0.005" to 0.005"	40"	00000000	00000
1 5/8"	-0.008" to 0.008"	1 1/2"	-0.005" to 0.005"	40"	00000000	00000
2"	-0.008" to 0.008"	1 7/8"	-0.005" to 0.005"	40"	00000000	00000
3/32" Wall Thick. (-0.008" to 0.008")
3/8"	-0.005" to 0.005"	3/16"	-0.003" to 0.003"	40"	00000000	0000
7/16"	-0.005" to 0.005"	1/4"	-0.003" to 0.003"	40"	00000000	0000
1/2"	-0.005" to 0.005"	5/16"	-0.003" to 0.003"	40"	00000000	0000
9/16"	-0.005" to 0.005"	3/8"	-0.003" to 0.003"	40"	00000000	00000
11/16"	-0.005" to 0.005"	1/2"	-0.003" to 0.003"	40"	00000000	00000
15/16"	-0.005" to 0.005"	3/4"	-0.003" to 0.003"	40"	00000000	00000
1 3/16"	-0.008" to 0.008"	1"	-0.005" to 0.005"	40"	00000000	00000
1/8" Wall Thick. (-0.008" to 0.008")
7/16"	-0.005" to 0.005"	3/16"	-0.003" to 0.003"	40"	00000000	0000
1/2"	-0.005" to 0.005"	1/4"	-0.003" to 0.003"	40"	00000000	0000
9/16"	-0.005" to 0.005"	5/16"	-0.003" to 0.003"	40"	00000000	0000
5/8"	-0.005" to 0.005"	3/8"	-0.003" to 0.003"	40"	00000000	00000
3/4"	-0.005" to 0.005"	1/2"	-0.003" to 0.003"	40"	00000000	00000
7/8"	-0.005" to 0.005"	5/8"	-0.003" to 0.003"	40"	00000000	00000
1"	-0.008" to 0.008"	3/4"	-0.003" to 0.003"	40"	00000000	00000
1 1/4"	-0.008" to 0.008"	1"	-0.005" to 0.005"	40"	00000000	00000
1 1/2"	-0.008" to 0.008"	1 1/4"	-0.005" to 0.005"	40"	00000000	00000
1 3/4"	-0.008" to 0.008"	1 1/2"	-0.005" to 0.005"	40"	00000000	00000
2 1/4"	-0.008" to 0.008"	2"	-0.005" to 0.005"	40"	00000000	00000
3/16" Wall Thick. (-0.008" to 0.008")
9/16"	-0.005" to 0.005"	3/16"	-0.003" to 0.003"	40"	00000000	00000
5/8"	-0.005" to 0.005"	1/4"	-0.003" to 0.003"	40"	00000000	00000
11/16"	-0.005" to 0.005"	5/16"	-0.003" to 0.003"	40"	00000000	00000
3/4"	-0.005" to 0.005"	3/8"	-0.003" to 0.003"	40"	00000000	00000
7/8"	-0.005" to 0.005"	1/2"	-0.003" to 0.003"	40"	00000000	00000
1"	-0.008" to 0.008"	5/8"	-0.003" to 0.003"	40"	00000000	00000
1 1/8"	-0.008" to 0.008"	3/4"	-0.003" to 0.003"	40"	00000000	00000
1 3/8"	-0.008" to 0.008"	1"	-0.005" to 0.005"	40"	00000000	00000
1 7/8"	-0.008" to 0.008"	1 1/2"	-0.005" to 0.005"	40"	00000000	00000
1/4" Wall Thick. (-0.008" to 0.008")
3/4"	-0.005" to 0.005"	1/4"	-0.003" to 0.003"	40"	00000000	00000
7/8"	-0.005" to 0.005"	3/8"	-0.003" to 0.003"	40"	00000000	00000
1"	-0.008" to 0.008"	1/2"	-0.003" to 0.003"	40"	00000000	00000
1 1/4"	-0.008" to 0.008"	3/4"	-0.003" to 0.003"	40"	00000000	00000
1 1/2"	-0.008" to 0.008"	1"	-0.005" to 0.005"	40"	00000000	00000
1 3/4"	-0.008" to 0.008"	1 1/4"	-0.005" to 0.005"	40"	00000000	00000
2"	-0.008" to 0.008"	1 1/2"	-0.005" to 0.005"	40"	00000000	00000
3"	-0.008" to 0.008"	2 1/2"	-0.005" to 0.005"	40"	00000000	00000

Halogen-Free Garolite G-10 Tubes

Color: Yellow
Max. Temperature: 265Â° F
Tensile Strength: 32,000-40,000 psi (Excellent)
Impact Strength: 5.5-9.5 ft.-lbs./in. (Excellent)
Hardness: Rockwell M100 (Extra Hard)
For Use Outdoors: No
Specifications Met: MIL-I-24768/2, UL 94HB

These Garolite G-10 tubes can be used in place of Garolite G-10/FR4 tubes for applications that are sensitive to halogen, such as in nuclear plants. They're strong, machinable, and electrically insulating. Made of an epoxy resin with fiberglass fabric reinforcement, Garolite G-10 is also called epoxy-grade industrial laminate and phenolic.

1/32" Wall Thick. (-0.031" to 0.031")
OD	ID	Lg.		Each
3/16"	1/8"	39"	0000000	000000
1/4"	3/16"	39"	0000000	00000
1/16" Wall Thick. (-0.031" to 0.031")
1/4"	1/8"	39"	0000000	00000
5/16"	3/16"	39"	0000000	00000
3/8"	1/4"	39"	0000000	00000
7/16"	5/16"	39"	0000000	00000
1/2"	3/8"	39"	0000000	00000
5/8"	1/2"	39"	0000000	00000
3/4"	5/8"	39"	0000000	00000
7/8"	3/4"	39"	0000000	00000
1 1/8"	1"	39"	0000000	00000
3/32" Wall Thick. (-0.031" to 0.031")
3/8"	3/16"	39"	0000000	00000
7/16"	1/4"	39"	0000000	00000
1/2"	5/16"	39"	0000000	00000
9/16"	3/8"	39"	0000000	00000
11/16"	1/2"	39"	0000000	00000
13/16"	5/8"	39"	0000000	00000
15/16"	3/4"	39"	0000000	00000
1/8" Wall Thick. (-0.031" to 0.031")
7/16"	3/16"	39"	0000000	00000
1/2"	1/4"	39"	0000000	00000
9/16"	5/16"	39"	0000000	00000
5/8"	3/8"	39"	0000000	00000
3/4"	1/2"	39"	0000000	00000
7/8"	5/8"	39"	0000000	00000
1"	3/4"	39"	0000000	00000
1 1/4"	1"	39"	0000000	00000
1 1/2"	1 1/4"	39"	0000000	000000
2"	1 3/4"	39"	00000000	000000
2 1/4"	2"	39"	00000000	000000
2 1/2"	2 1/4"	39"	00000000	000000
2 3/4"	2 1/2"	39"	00000000	000000
3"	2 3/4"	39"	00000000	000000
3 1/4"	3"	39"	00000000	000000
3/16" Wall Thick. (-0.031" to 0.031")
9/16"	3/16"	39"	0000000	00000
5/8"	1/4"	39"	0000000	00000
11/16"	5/16"	39"	0000000	00000
3/4"	3/8"	39"	0000000	00000
7/8"	1/2"	39"	0000000	00000
1"	5/8"	39"	0000000	00000
1 1/8"	3/4"	39"	0000000	00000
1 1/4"	7/8"	39"	0000000	000000
1 3/8"	1"	39"	0000000	000000
1/4" Wall Thick. (-0.031" to 0.031")
3/4"	1/4"	39"	00000000	00000
7/8"	3/8"	39"	00000000	00000
1"	1/2"	39"	00000000	00000
1 1/4"	3/4"	39"	00000000	000000

Multipurpose Flame-Retardant Garolite G-10/FR4 Tubes

Color: Yellow
Max. Temperature: 265Â° F
Tensile Strength: 35,000-50,000 psi (Excellent)
Impact Strength: 5.5-12 ft.-lbs./in. (Excellent)
Hardness: Rockwell M110 (Extra Hard)
For Use Outdoors: No
Specifications Met: MIL-I-24768/27, UL 94V0

These tubes are Garolite G-10/FR4, a good all-around choice that's strong, machinable, and electrically insulating. They're made of a flame-retardant epoxy resin with fiberglass fabric reinforcement. Garolite G-10/FR4 is also called epoxy-grade industrial laminate and phenolic.

1/32" Wall Thick.
OD	OD Tolerance	ID	ID Tolerance	Lg.		Each
1/4"	-0.005" to 0.005"	3/16"	-0.003" to 0.003"	18"	0000000	000000
1/16" Wall Thick.
5/16"	-0.005" to 0.005"	3/16"	-0.003" to 0.003"	18"	0000000	00000
3/8"	-0.005" to 0.005"	1/4"	-0.003" to 0.003"	42"	0000000	00000
1/2"	-0.005" to 0.005"	3/8"	-0.003" to 0.003"	42"	0000000	00000
5/8"	-0.005" to 0.005"	1/2"	-0.003" to 0.003"	42"	0000000	00000
3/4"	-0.005" to 0.005"	5/8"	-0.003" to 0.003"	42"	0000000	00000
7/8"	-0.005" to 0.005"	3/4"	-0.004" to 0.004"	42"	0000000	00000
1"	-0.005" to 0.005"	7/8"	-0.004" to 0.004"	42"	0000000	00000
1 1/8"	-0.005" to 0.005"	1"	-0.004" to 0.004"	42"	0000000	00000
1 3/8"	-0.005" to 0.005"	1 1/4"	-0.004" to 0.004"	42"	0000000	00000
1 5/8"	-0.005" to 0.005"	1 1/2"	-0.004" to 0.004"	42"	0000000	000000
3/32" Wall Thick.
3/8"	-0.005" to 0.005"	3/16"	-0.003" to 0.003"	18"	0000000	00000
1/2"	-0.005" to 0.005"	5/16"	-0.003" to 0.003"	42"	0000000	00000
1/8" Wall Thick.
7/16"	-0.005" to 0.005"	3/16"	-0.003" to 0.003"	18"	0000000	00000
1/2"	-0.005" to 0.005"	1/4"	-0.003" to 0.003"	42"	0000000	00000
5/8"	-0.005" to 0.005"	3/8"	-0.003" to 0.003"	42"	0000000	00000
3/4"	-0.005" to 0.005"	1/2"	-0.003" to 0.003"	42"	0000000	00000
7/8"	-0.005" to 0.005"	5/8"	-0.003" to 0.003"	42"	0000000	00000
1"	-0.005" to 0.005"	3/4"	-0.004" to 0.004"	42"	0000000	00000
1 1/8"	-0.005" to 0.005"	7/8"	-0.004" to 0.004"	42"	0000000	00000
1 1/4"	-0.005" to 0.005"	1"	-0.004" to 0.004"	42"	0000000	00000
1 1/2"	-0.005" to 0.005"	1 1/4"	-0.004" to 0.004"	42"	0000000	000000
1 3/4"	-0.005" to 0.005"	1 1/2"	-0.004" to 0.004"	42"	0000000	000000
2"	-0.005" to 0.005"	1 3/4"	-0.004" to 0.004"	42"	0000000	000000
2 1/4"	-0.008" to 0.008"	2"	-0.008" to 0.008"	42"	0000000	000000
2 1/2"	-0.008" to 0.008"	2 1/4"	-0.008" to 0.008"	42"	0000000	000000
2 3/4"	-0.008" to 0.008"	2 1/2"	-0.008" to 0.008"	42"	0000000	000000
3"	-0.008" to 0.008"	2 3/4"	-0.008" to 0.008"	42"	0000000	000000
3 1/4"	-0.008" to 0.008"	3"	-0.008" to 0.008"	42"	0000000	000000
3/16" Wall Thick.
9/16"	-0.005" to 0.005"	3/16"	-0.003" to 0.003"	18"	0000000	00000
5/8"	-0.005" to 0.005"	1/4"	-0.003" to 0.003"	42"	0000000	00000
3/4"	-0.005" to 0.005"	3/8"	-0.003" to 0.003"	42"	0000000	00000
7/8"	-0.005" to 0.005"	1/2"	-0.003" to 0.003"	42"	0000000	00000
1"	-0.005" to 0.005"	5/8"	-0.003" to 0.003"	42"	0000000	000000
1 1/8"	-0.005" to 0.005"	3/4"	-0.004" to 0.004"	42"	0000000	000000
1 3/8"	-0.005" to 0.005"	1"	-0.004" to 0.004"	42"	0000000	000000
1 5/8"	-0.005" to 0.005"	1 1/4"	-0.004" to 0.004"	42"	0000000	000000
1 7/8"	-0.005" to 0.005"	1 1/2"	-0.004" to 0.004"	42"	0000000	000000
1/4" Wall Thick.
1"	-0.005" to 0.005"	1/2"	-0.003" to 0.003"	42"	0000000	000000
1 1/4"	-0.005" to 0.005"	3/4"	-0.004" to 0.004"	42"	0000000	000000

Easy-to-Machine Garolite LE Tubes

Color: Brown
Max. Temperature: 235Â° F
Tensile Strength: 6,000-15,300 psi (Good)
Impact Strength: 0.8-1.25 ft.-lbs./in. (Poor)
Hardness: Not Rated
For Use Outdoors: No
Specifications Met: MIL-I-24768/13

Constructed of a phenolic resin with fine-weave linen fabric reinforcement, these Garolite LE tubes can be machined into intricate parts with nothing more than high-speed steel tooling. Garolite LE is sometimes referred to as industrial laminate, phenolic, and Bakelite.

1/32" Wall Thick. (-0.012" to 0.012")
OD	OD Tolerance	ID	ID Tolerance	Lg.		Each
1/4"	-0.005" to 0.005"	3/16"	-0.003" to 0.003"	40"	00000000	000000
5/16"	-0.005" to 0.005"	1/4"	-0.003" to 0.003"	40"	00000000	00000
3/8"	-0.005" to 0.005"	5/16"	-0.003" to 0.003"	40"	00000000	00000
7/16"	-0.005" to 0.005"	3/8"	-0.003" to 0.003"	40"	00000000	00000
9/16"	-0.005" to 0.005"	1/2"	-0.003" to 0.003"	40"	00000000	00000
11/16"	-0.005" to 0.005"	5/8"	-0.003" to 0.003"	40"	00000000	00000
13/16"	-0.005" to 0.005"	3/4"	-0.003" to 0.003"	40"	00000000	00000
1 1/16"	-0.008" to 0.008"	1"	-0.005" to 0.005"	40"	00000000	00000
1 5/16"	-0.008" to 0.008"	1 1/4"	-0.005" to 0.005"	40"	00000000	00000
1/16" Wall Thick. (-0.012" to 0.012")
5/16"	-0.005" to 0.005"	3/16"	-0.003" to 0.003"	40"	00000000	0000
3/8"	-0.005" to 0.005"	1/4"	-0.003" to 0.003"	40"	00000000	00000
7/16"	-0.005" to 0.005"	5/16"	-0.003" to 0.003"	40"	00000000	00000
1/2"	-0.005" to 0.005"	3/8"	-0.003" to 0.003"	40"	00000000	00000
5/8"	-0.005" to 0.005"	1/2"	-0.003" to 0.003"	40"	00000000	00000
3/4"	-0.005" to 0.005"	5/8"	-0.003" to 0.003"	40"	00000000	00000
7/8"	-0.005" to 0.005"	3/4"	-0.003" to 0.003"	40"	00000000	00000
1 1/8"	-0.008" to 0.008"	1"	-0.005" to 0.005"	40"	00000000	00000
3/32" Wall Thick. (-0.012" to 0.012")
3/8"	-0.005" to 0.005"	3/16"	-0.003" to 0.003"	40"	00000000	00000
7/16"	-0.005" to 0.005"	1/4"	-0.003" to 0.003"	40"	00000000	00000
1/2"	-0.005" to 0.005"	5/16"	-0.003" to 0.003"	40"	00000000	00000
9/16"	-0.005" to 0.005"	3/8"	-0.003" to 0.003"	40"	00000000	00000
15/16"	-0.005" to 0.005"	3/4"	-0.003" to 0.003"	40"	00000000	00000
1/8" Wall Thick. (-0.012" to 0.012")
1/2"	-0.005" to 0.005"	1/4"	-0.003" to 0.003"	40"	00000000	00000
5/8"	-0.005" to 0.005"	3/8"	-0.003" to 0.003"	40"	00000000	00000
3/4"	-0.005" to 0.005"	1/2"	-0.003" to 0.003"	40"	00000000	00000
7/8"	-0.005" to 0.005"	5/8"	-0.003" to 0.003"	40"	00000000	00000
1"	-0.008" to 0.008"	3/4"	-0.003" to 0.003"	40"	00000000	00000
1 1/4"	-0.008" to 0.008"	1"	-0.005" to 0.005"	40"	00000000	00000
1 1/2"	-0.008" to 0.008"	1 1/4"	-0.005" to 0.005"	40"	00000000	00000
1 3/4"	-0.008" to 0.008"	1 1/2"	-0.005" to 0.005"	40"	00000000	00000
3/16" Wall Thick. (-0.012" to 0.012")
5/8"	-0.005" to 0.005"	1/4"	-0.003" to 0.003"	40"	00000000	00000
3/4"	-0.005" to 0.005"	3/8"	-0.003" to 0.003"	40"	00000000	00000
7/8"	-0.005" to 0.005"	1/2"	-0.003" to 0.003"	40"	00000000	00000
1"	-0.008" to 0.008"	5/8"	-0.003" to 0.003"	40"	00000000	00000
1 1/8"	-0.008" to 0.008"	3/4"	-0.003" to 0.003"	40"	00000000	00000
1/4" Wall Thick. (-0.012" to 0.012")
3/4"	-0.005" to 0.005"	1/4"	-0.003" to 0.003"	40"	00000000	00000
7/8"	-0.005" to 0.005"	3/8"	-0.003" to 0.003"	40"	00000000	00000
1"	-0.008" to 0.008"	1/2"	-0.003" to 0.003"	40"	00000000	00000
1 1/8"	-0.008" to 0.008"	5/8"	-0.003" to 0.003"	40"	00000000	00000
1 1/4"	-0.008" to 0.008"	3/4"	-0.003" to 0.003"	40"	00000000	00000
1 1/2"	-0.008" to 0.008"	1"	-0.005" to 0.005"	40"	00000000	00000
2"	-0.008" to 0.008"	1 1/2"	-0.005" to 0.005"	40"	00000000	00000
1/2" Wall Thick. (-0.012" to 0.012")
2 1/2"	-0.008" to 0.008"	1 1/2"	-0.005" to 0.005"	40"	00000000	000000
3"	-0.008" to 0.008"	2"	-0.005" to 0.005"	40"	00000000	000000

Economical Garolite CE Tubes

Color: Brown
Max. Temperature: 235Â° F
Tensile Strength: 6,000-10,000 psi (Good)
Impact Strength: 1.4-1.7 ft.-lbs./in. (Poor)
Hardness: Not Rated
For Use Outdoors: No
Specifications Met: MIL-I-24768/14

Made of a phenolic resin with cotton fabric reinforcement, these Garolite CE tubes are often fabricated into parts where high strength is not required. They can be easily machined into mechanical parts, such as rollers, bushings, and washers. Garolite CE is sometimes called canvas-grade industrial laminate, phenolic, and Bakelite.

1/32" Wall Thick. (-0.008" to 0.008")
OD	OD Tolerance	ID	ID Tolerance	Lg.		Each
1/4"	-0.005" to 0.005"	3/16"	-0.003" to 0.003"	40"	000000000	00000
5/16"	-0.005" to 0.005"	1/4"	-0.003" to 0.003"	40"	000000000	00000
3/8"	-0.005" to 0.005"	5/16"	-0.003" to 0.003"	40"	000000000	00000
7/16"	-0.005" to 0.005"	3/8"	-0.003" to 0.003"	40"	000000000	00000
9/16"	-0.005" to 0.005"	1/2"	-0.003" to 0.003"	40"	000000000	00000
1/16" Wall Thick. (-0.008" to 0.008")
5/16"	-0.005" to 0.005"	3/16"	-0.003" to 0.003"	40"	000000000	0000
3/8"	-0.005" to 0.005"	1/4"	-0.003" to 0.003"	40"	000000000	0000
7/16"	-0.005" to 0.005"	5/16"	-0.003" to 0.003"	40"	000000000	0000
1/2"	-0.005" to 0.005"	3/8"	-0.003" to 0.003"	40"	000000000	00000
5/8"	-0.005" to 0.005"	1/2"	-0.003" to 0.003"	40"	000000000	00000
3/4"	-0.005" to 0.005"	5/8"	-0.003" to 0.003"	40"	000000000	00000
7/8"	-0.005" to 0.005"	3/4"	-0.003" to 0.003"	40"	000000000	00000
1 1/8"	-0.008" to 0.008"	1"	-0.005" to 0.005"	40"	000000000	00000
3/32" Wall Thick. (-0.008" to 0.008")
3/8"	-0.005" to 0.005"	3/16"	-0.003" to 0.003"	40"	000000000	0000
1/2"	-0.005" to 0.005"	5/16"	-0.003" to 0.003"	40"	000000000	00000
11/16"	-0.005" to 0.005"	1/2"	-0.003" to 0.003"	40"	000000000	00000
1/8" Wall Thick. (-0.008" to 0.008")
1/2"	-0.005" to 0.005"	1/4"	-0.003" to 0.003"	40"	000000000	00000
5/8"	-0.005" to 0.005"	3/8"	-0.003" to 0.003"	40"	000000000	00000
3/4"	-0.005" to 0.005"	1/2"	-0.003" to 0.003"	40"	000000000	00000
7/8"	-0.005" to 0.005"	5/8"	-0.003" to 0.003"	40"	000000000	00000
1"	-0.008" to 0.008"	3/4"	-0.003" to 0.003"	40"	000000000	00000
1 1/4"	-0.008" to 0.008"	1"	-0.005" to 0.005"	40"	000000000	00000
1 1/2"	-0.008" to 0.008"	1 1/4"	-0.005" to 0.005"	40"	000000000	00000
3/16" Wall Thick. (-0.008" to 0.008")
5/8"	-0.005" to 0.005"	1/4"	-0.003" to 0.003"	40"	000000000	00000
3/4"	-0.005" to 0.005"	3/8"	-0.003" to 0.003"	40"	000000000	00000
1"	-0.008" to 0.008"	5/8"	-0.003" to 0.003"	40"	000000000	00000
1 3/8"	-0.008" to 0.008"	1"	-0.005" to 0.005"	40"	000000000	00000
1 5/8"	-0.008" to 0.008"	1 1/4"	-0.005" to 0.005"	40"	000000000	00000
1/4" Wall Thick. (-0.008" to 0.008")
3/4"	-0.005" to 0.005"	1/4"	-0.003" to 0.003"	40"	000000000	00000
1"	-0.008" to 0.008"	1/2"	-0.003" to 0.003"	40"	000000000	00000
1 1/8"	-0.008" to 0.008"	5/8"	-0.003" to 0.003"	40"	000000000	00000
1 1/4"	-0.008" to 0.008"	3/4"	-0.003" to 0.003"	40"	000000000	00000
1 1/2"	-0.008" to 0.008"	1"	-0.005" to 0.005"	40"	000000000	00000
1 3/4"	-0.008" to 0.008"	1 1/4"	-0.005" to 0.005"	40"	000000000	00000
2"	-0.008" to 0.008"	1 1/2"	-0.005" to 0.005"	40"	000000000	00000
3"	-0.008" to 0.008"	2 1/2"	-0.005" to 0.005"	40"	000000000	000000

Terms and Conditions and Privacy Policy

About Composites